SIMPLE [ how to] spark plug Replacement Toyota Camry √ Fix It Angel

Repair Manuals: shrsl.com/3zwnv sovrn.co/amfaf3n Fix it Angel EBAY STORE: ebay.us/OE6UsK repair smith fxo.co/1284793... THANK YOU ALL FOR WATCHING MY VIDEO. This video is NOT sponsored. If you would like to support this channel. These links are my affiliate links which means if you buy something I will receive a small commission. Thank you for your support. God Bless
www.amazon.com... www.getsomeveg...
2002 2003 2004 2005 2006 Toyota Camry 2.4-liter 2AZ-FE I4 engine.
Spark Plugs amzn.to/2DG7VgG
tinyurl.com/y5...
3/8 Drive FlexHead Ratchet goo.gl/QVMstw
goo.gl/jjDK9r
3/8 Drive Metric Socket Set goo.gl/sRTnaT
goo.gl/MyyyWU
3/8 dr. Metric Deep Socket Set goo.gl/6KCiYG
goo.gl/DxQBJM
3/8" Drive Extension Set goo.gl/HrOvhn
goo.gl/hpyyHw
Air Gun Blower amzn.to/2D7pyFM
tiny.cc/xl024y
5/8 Spark Plug Socket goo.gl/SaMjK7
goo.gl/y6p4z7
5/8 Magnetic Universal Spark Plug Extension Set
goo.gl/xrT6LV
goo.gl/GrbnqV
Spark Plug Gap Gauge goo.gl/WQncfN
goo.gl/VHd2WX
Anti-Seize Grease: goo.gl/vdoMv8
goo.gl/U8vr9c
1/4" dr. Torque Wrench goo.gl/gwAuDu
goo.gl/psbxjL
Shop Towels goo.gl/K1LJKh
goo.gl/aeqBTL
Shop Rags goo.gl/wzFLHT
goo.gl/C6UfjR
2003 Toyota Camry
Spark plug gap: 0.039"-0.043"
Torque: 14 ft. lbs
Please subscribe here: goo.gl/kXkkpy
Please donate here if this video was helpful
Click LINK www.paypal.me/...
Check out my online store for tools to purchase
www.amazon.com...
Amazon Prime Membership goo.gl/AvLVjs
Purchase any of my apparel and a portion of my monthly earnings will go to Catholic Charities here in Las Vegas
Click LINK www.cafepress.c...
Spark Plugs goo.gl/Anj8GR
3/8" Drive Metric Deep Socket Set goo.gl/UupXqH
3/8 Drive FlexHead Ratchet goo.gl/QVMstw
goo.gl/jjDK9r
Spark Plug Socket set goo.gl/8c3N4D
Spark Plug Gapper Tool goo.gl/cQV6AW
Anti-Seize Grease goo.gl/CCV5Ex
My son helped me replace spark plugs on this 2003 Camry. He keeps me company and always wants to learn and help because he knows I will pay him. Smart kid!! Now he has enough to buy SkyLanders.
The information contained in this video is for general guidance, not responsible for any errors or injuries that you have done. Samsung W200 pocket camcorder was used to do this video. DISCLAIMER - Due to factors beyond the control of FixitAngel, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. FixitAngel assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. FixitAngel recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of FixitAngel, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the end user and not FixitAngel nor any of it’s subsidiaries. All links in the description are affiliate links. if you would like to support this channel. purchase any of the product links. i get a little commission from each purchase. thank you

[@denospyridon3126]

That's great to see a father and son working on a car together.

[@FixItAngel]

+deno spyridon Thank you for the comment. Have a nice day.

[@mjdriscoll2110]

Good mechanic - Great Dad! Thanks for the video.

[@FixItAngel]

+Mike D Thank you Mike for the comment. I really do try to be a dad. Not great but good. My so helpful son always wants to learn and I'm so happy to have him beside me working on a car. Thanks again. Please share and subscribe.

[@whitelightbulb41]

Great Parenting skills!!!

[@SouthsideDon48]

adorable video. :). i wish I had experiences like this with my dad. you and your son are so lucky, you shared an experience that will leave a lasting memory for both of you for a lifetime. cheers. :)

[@philw51216]

thanks for the video. you are a great father. your son is very luck. wish there were more out there like you sir.

[@FixItAngel]

+phil williams Welcome and thank you for your comment. Please subscribe. Have a nice day.

[@captainquint25]

nice video. you son is a great helper and a competent mechanic. May God bless you both. Hard to place a price on special times such as seen in this video. Many thanks.

[@kevinkidneyy]

Awesome ! My clips broke so i don’t unclick them just unscrew the coil And leave on top of engine attached . Great job teaching young

[@x9x9x9x9x9]

Thats awesome you did this with your son. Thanks for the video!

[@jhonjohnjonjondoe5011]

i subbed and hope to see your son working on more cars with you. This was all it took for my sub

[@UltimateRavens_Fan]

I subscribed ! Thanks for the video and please post more on this model... I'm never getting ride of my '02 Camry! Thanks again!

[@FixItAngel]

Hiram Merchant Welcome!! Yes I will. Thank you!!

[@Joserocha-wm9de]

Great job Father and son doing team work , doing same job soon Toyota spark plug torque specs says 18 ft lbs is it to much ? Also i would like to ask you Angel if you have a video replacing serpentine belt ? I appreciate any answer thx brother

[@jhonjohnjonjondoe5011]

lol this is cute i wish i would of done this when my dad always tried to teach me at this age and older.

[@mohammedashrafali5180]

Thats awesome. I will do tomorrow, hope I can do like you guys

[@juanochoa8213]

Nice video fam cool to see ur son helping you out 👍💪.. I just replaced them on my 2011 Toyota Camry at 110k but after i change them out it seem the car lost some power .??? Would appreciate it if you can help me. Thank you

[@PeteCastellano]

Helpful and informative. Thank you

[@oxygen703]

Thank you for this video!

[@FixItAngel]

Welcome!! Please subscribe. Have a nice day.

[@GeorgeHamwi]

Love the videos, if you wouldn't mind can you make a video of the ambient temp Sensor on a Toyota Camry 2002

[@MariaRamirez-cb6il]

Hi I'm having trouble pulling out the back side driver sparkplug is there any special tool u recommend me to use so that I can finally install that last sparkplug I'm frustrated already don't have an idea what to do and I don't have that much money to bring in a mechacic please help me

[@dealershipcallcenter]

I get why you blow air around the plug before pulling it, keep any debris or dirt from falling into your top end, but im confused as to why you would blow air when the plugs are actually out. Aren't you then possibly pushing any debris, dirt into the top end since the plugs are out?

[@FixItAngel]

Hello, From my experience before. There is still a little dirt when I remove the plugs so I just blast air again. There's no way to get all the dirt out when the plugs are off. It's just a little dirt but if it was a pebble and tiny rocks, then it would be a problem. Thanks for the question. Please subscribe.

[@phantomshtter]

Yeah, don't blow air down there once the plugs are out. Do a few good blasts before and a few once you've backed the plug out half way.

[@lubohong6695]

Use vacuum is better？

[@martincastaneda5495]

Angel fix thank you for your videos, can you post a video on 2011 v6 Camry spark plugs. Thank you and have a nice day you and your son.

[@FixItAngel]

Hi Martin, this is the same procedure as your car. I did this on an Avalon. kzbin.info/www/bejne/Zpy0ep6wq9hshLs

[@seanword8742]

I broke one the the connector tabs too on my 2011 camry, how did the tape work I was thinking the car heat would melt it?

[@Pointwestpictures]

thanks so much!

[@sleepyboi600]

hi. nice video what kind or brand of torque wrench ur using?

[@debbiesanchez2354]

good job

[@scottystiffchicken]

Looks like Spring Valley!

[@BassamAlturck]

Hi I need watch how replacement head gasket Toyota Camry OR Corolla. .. Please Thank you so much

[@yusuihang]

I just did this on 2002 Camry 2AZ-FE. Found that there was a drop of oil on the bolt hole for the #3 ignition coil. Is there a grommet or seal inside the valve cover for the ignition bolts? Can't find such a part when I looked online. Not sure why I saw drop of oil there. Spark plug holes and ignition coils are totally dry. Thanks. BTW, I didn't use anti-seize and torqued to 18 ft-lbs. Had read that 18 ft-bs is the dry torque.

[@FixItAngel]

I have no idea what it could be. I never experienced that. It's ok if you did not use anti-seize. Welcome. Please Subscribe.

[@Auwelder]

Thanks your video, however it doesnt need disconnect battery before start?

[@FixItAngel]

Hi, you do not have to disconnect the battery before replacing the spark plugs. Just remove the car keys from the ignition. Thank you for watching

[@motap001]

Just break the 10mm nuts and pull the whole thing out. Now you have to replace the connectors.

[@jeromechua6616]

why did you put electrical tape.. can you put back the original clip?

[@robertgarcia9006]

@fixitangel what kind of torque wrench is that? What brand and size?

[@FixItAngel]

Hi Robert, It's a Snap-On 3/8" drive torque wrench. I got it when I graduated from automotive school in Phoenix, Arizona.

[@OneLove-ik8kh]

HELP. I had my spark plug changed few days ago, but my car still misfires. Main issue I’m having tho is it won’t start right way. Mechanic told me I need to change all 4 spark plugs and coils but couldn’t figure out why it won’t start right way. Battery is good, fuel pump is good, except for 2 bad spark plugs and coils everything seems fine. Any suggestions why it won’t start?

[@FixItAngel]

Bye Felicia hi, what was the fuel pressure when you leave the car off for 30 minutes. The mechanic would have told you that. Problem could be fuel pressure regulator not holding pressure when car is off.

[@OneLove-ik8kh]

Fix It Angel thank a lot for replying. I actually don’t know what the fuel pressure is, or even where to check tbh but just knowing that could be the issue is a big help. I’ll look in to it. If u have any suggestions on how I should check, I would greatly appreciate it

[@FixItAngel]

Bye Felicia welcome, you will need a fuel pressure gauge tester.

[@OneLove-ik8kh]

Fix It Angel just as an update. Replaced the spark plugs, coil plug boots and made sure all the broken clips were zip tied; the engine light immediately turned off. Car was overheating as well, hope it isn’t the head gasket, but so far so good. 🤞 Mind u I did all of that from watching KZbin videos, so thnxs for ppl like u, I saved money. Big ups 👏

[@BassamAlturck]

How replacement timing belt Toyota avanza 2015 please Thank you so much

[@FixItAngel]

Bassam Alturck27494 the Venza has a timing chain. You don’t have to change it. Only change when it’s making chain noise.

[@BassamAlturck]

Fix It Angel Thank you so much But I want Toyota Avanza 2015 replacement timing belt Not vanza Thank you again

[@Tjelection2024]

How much torque should you put when installing the spark plugs?

[@FixItAngel]

First, tighten by hand. Then tighten with ratchet 180°, start 12 o'clock then turn to 6 o'clock

[@ChuckyBeaver]

Is it a good idea to change the coils out too?

[@FixItAngel]

Hi Beavis, , do not change coils. it is not necessary, also it cost a lot, over $50 each for aftermarket. Have a nice day.

[@ChuckyBeaver]

ok thanks!

[@wendylucas9628]

I dont know what im doing wrong..but spark plugs will not come out

[@zeljkobanjac3715]

Im not sure that tape will hold conectors

[@FixItAngel]

Zeljko Banjac trust me, it’s holding with no problems. It’s no going anywhere unless someone yanks it off. It’s not like a moving part. What would you do?

[@William5394]

I think the Original Clips go back on.

[@FixItAngel]

what clips?

[@parayadesh]

You used the insulation tape instead of putting back the lead clips.

[@FixItAngel]

yes I did put insulation tape. whats the point on placing back the broken lead clips? Is the connector going fall off? No it's not.

[@parayadesh]

Fix It Angel Fair enough I did not know it was broken. I tried to put mine back on and did not know how then I started looking on the utube. I thought there was a trick to put those back on. I did not realise at all that I broke it. I thought that's how it comes off. Thanks.

[@pootychange00]

I tried to be extra careful removing the connectors after seeing this vid, still broke em. FML

[@FixItAngel]

Plastic will always break. Don't beat yourself.

[@pootychange00]

+Fix It Angel Thanks. I just started working on my car after an accident. So all of this is new to me. Your son is lucky to learn so young. Car knowledge is a valuable asset. I had oil in my plugs, the gasket was gone. Car has 170k miles on it. So now Im waiting for the gasket and plugs to be delivered. Hopefully the coils are still good. PCV valve was clogged as well.

[@MariaRamirez-cb6il]

Hi I'm having trouble pulling out the back side driver sparkplug is there any special tool u recommend me to use so that I can finally install that last sparkplug I'm frustrated already don't have an idea what to do and I don't have that much money to bring in a mechacic please help me

[@MariaRamirez-cb6il]

Hi I'm having trouble pulling out the back side driver sparkplug is there any special tool u recommend me to use so that I can finally install that last sparkplug I'm frustrated already don't have an idea what to do and I don't have that much money to bring in a mechacic please help me

[@heyitschinoable]

You can use wobble extensions, or universal sockets to help get into tighter places:)