Singer 111W153 Walking Foot Sewing Machine. Feeding Issues #13

[@ksgjlg]

What did you do to correct this problem? I'm having the same issue

[@SurvivalCitizen]

You are a lot closer now then you were last video! It is feeding somewhat properly now, but still off, as you know. I will take a video of my machine for you to see, but your machine is quite a bit different than mine. I think the head unit is OK, as everything is on the flats there. I think the feed dog rise and fall, and forward backward is your main culprit now. If your lighting was better it might be easier to long-distance diagnose.

[@francismuzofa4324]

Your feeddogs could be too high Your top n bottom shaft position could be out so it in such a way tht when you needle is bottom dead center your feeddogs should be top dead center, so you do tht frm you timing belt Tht cam at the sure does time the movement of the presser foot if you say its on a flat but the are two screws thn try n change the screw thts current on a flat n put the other one on the flat, Hope it helps

[@SurvivalCitizen]

I would post the web link for the video I made for you here, but you have blocked web addresses from the comments. The video ID is: ZFo5OyBeYVw

[@LetItBeVideos]

See this thread .... leatherworker.net/forum/topic/77234-singer-111w155-rehab/