Sir, you can't park your container there!

[@bgmckddy]

Even the simple jobs are fun to watch!! Thanks for sharing!!

[@PepesTowingService]

Thanks for watching!

[@tonytunnell9873]

What are the greatest blessings in the world is to be a man who loves his job.

[@JasonBristow2003]

Josh and Hulk knocking them dead! All your synthetic slings are awesome. It's amazing how far rigging equipment has come in just a few years! Hopefully next time that driver will make it his G.O.A.L. to Get Out And Look.

[@SumterWrecker]

Nice recovery as always. Stay safe

[@johnmccaughan4195]

Fixing other peoples problems. Great way to make a living. Fine job as usual. Thanks for sharing.

[@-ray-h]

I agree with Ron J. (below) Josh… The appeal would be for your fan base. We’d like to see what a true professional looks like… You don’t have to show us every single time just once in a while would be nice. You do such an awesome job of recovery; your channel and Ron Pratts channel are the only two we watch… You don’t use vulgar & everything is above board which is nice to see… You detail out everything you guys do, so your audience knows what going on, not leaving questions unanswered. You also reply back to some of your fans which is nice to see too… You guys do great work and your videos are definitely helping many of us get through 2020… I know I appreciate and have respect on what you guys do along with bringing it to folks all over… thank you and keep up the safe & great work…! PS nice clean truck btw…!

[@PepesTowingService]

Huh, never ever thought there would be so much demand to show my ugly mug on screen 😂😂 I'll try to do that more often

[@JasonEsquivel]

Did you catch Josh call some lines Arc Nemesis a few videos back?

[@-ray-h]

@@PepesTowingService Dude you're far from ugly man... Also I see those comments from the ladies... : )

[@ow8551]

Josh another one for the books. like that comment when you arrive to a call you are there to solve the problem. Thanks for you’re service.

[@PepesTowingService]

No problem!

[@gliderp]

When I was a young one working in a garage, I used to think I did some neat shit with a Holmes 440 or 480 wrecker. Watching this makes me realized just what a rube I was. Most of my work was towing broken down cars off the highway, recovering cars that the kids would take off road and get stuck in mud on dates, and yanking cars out of the local lakes, rivers, and ponds the drunks like to drive into. One of the best "growing up" jobs I ever had, only being bettered by being an EMT for 4 years.

[@stex5150]

Well at least there is ONE container not floating around the Pacific Ocean.

[@davoupnya3202]

Love all of your video's Josh, you are doing fantastic with your channeled and thank you for taking the time to share with all of us !

[@pullimgsm]

Keep the videos coming! You do a great job. Safe and professional.

[@jonathanlanglois2742]

That ditch... You can see that the curb has got plenty of damage. I'm guessing that's far from the first time something like that has happened over there.

[@PepesTowingService]

Prob won't be the last either lol

[@machellep1]

Keeps you in tacos Josh. Let’s hope they do it again lol

[@johnsmart3587]

A man and his machine, awesome, you are superb, Thanks.

[@johnandshirleyburau6867]

only 6 hours in-so many viewers already enjoying your video

[@juanfrancisco7241]

Another good job!! You make it look easy!

[@PepesTowingService]

Practice makes perfect

[@brenenraymond8103]

Good job Josh! You do great work bro!

[@F90M5]

Extra high container a.k.a HCC (High Cube Container) 9ft 6 inches. On a chassis they are about similar height to 53ft dry vans. Standard containers are 8ft 6 inches.

[@diverrite]

great job, Merry Christmas from Alabama

[@7dioclau]

2 in 1... Whoooo wheeee!!!! Love the professionalism!!!! 💪👍👍💪

[@PepesTowingService]

Normally I wouldn't post either since they're too short, but I've been doing double videos lately and people seem to like them

[@gregsimon9061]

Awesome job guys as you always do.

[@debrablack2759]

Good afternoon Josh, Another great video. Thank you for taking the time for the camera. Really enjoy watching you work. I finally got to see what you look like. Looking 👁️👁️ good Josh 🤭😊😘. ✌️🤟💯% Great job from your # 1 fan in Wilmington. Love Debra 💗💗🇺🇲🙋🙋

[@kevinkenyon7045]

Double jobs, great video’s. Thanks for sharing. Kevin

[@barbannco]

another good job Josh...great to watch another video....not enough of them though.....LOL.

[@CountryEquipmentRentals]

Nice work guys!

[@PepesTowingService]

💪💪💪💪

[@klausbukofski1555]

Wish everyone a Happy New Year 2021. The New Year should bring you peace, joy, health and conviviality.

[@antoniogutierrezbarba6360]

Presente: Cordial Saludo; Desde Zapopan Jalisco Mx. Feliz Navidad y Próspero Año Nuevo 2021

[@stevenhenson2152]

Great work

[@KB-gs8zi]

Sir Josh !!! Haven't heard from you guys in over a month !!!! Hope everything is OK out there !! Heard of the heavy rains & US 1 being slid off into the Ocean !! Sorry,, ""HULK"" can't recover that for sure !! Keep the viewers in mind & ""KEEP IT SAFE ""!!!

[@wideslammer]

Josh, we see a lot of Hulk and all of what he can do. Would it be possible to see more of the master operator who's giving Hulk directions? Unlike some KZbinrs, you are not a publicity hound. However, when the camera is on a tripod, maybe you occasionally could turn, face the camera and tell us what you are doing. I'm sure viewers other than me would like to see more of the guy behind the controls. I'll admit that we did see a few more profiles and distance shots than what is common. Regardless, whatever you do is fine with me -- this is THE BEST tow/recovery channel on KZbin.

[@PepesTowingService]

I don't see the appeal. My videos are straight action and to the point, to achieve this I use my chest or shoulder mount with my action cam so it's permanently first person. I like to explain what I'm doing as I'm walking around or rigging, then execute that plan from a good distance so my viewers can enjoy. I'll take it into consideration tho!

[@bbersani2]

That 2nd one is why you always check your load boys and girls. If you have any doubts, refuse to take it. Your life is too short to risk on a sketchy load like that.

[@PepesTowingService]

Yup, I see it all the time. A simple check and you'd clearly see how dangerous that is.

[@MTstone8]

Yes You did. very Good Job

[@stellarproductions8888]

It is clear to me that some companies are going to need safety briefings on how to properly load a trailer. You would think that it would be common place already to have such instruction, but I think some companies fall through the cracks, and then we get this. The solution was a bit unorthodox yes, but it was a solution none the less.

[@bbersani2]

Yeah but you gotta have some common sense as a driver to do a proper pretrip

[@stellarproductions8888]

@@bbersani2 Exactly! As much as we need proper logistics companies, we also need proper drivers. Only time s driver can't check their load, is when a seal Is put on it.

[@PepesTowingService]

Too often they take shortcuts to save money. They get away with it a lot, but then stuff like this happens. Just glad it didn't flip and kill anyone.

[@markerickson4273]

Good stuff be safe merry christmas

[@doak4886]

Good thing that guy in the truck was helping Hulk pull that last bag. I had to giggle a little.

[@lisamclelland2738]

Awsome job!.love watching your videos. So exciting.

[@1964biggmark]

nice to see the face behind the camera :) great vids thanks for sharing,greeting from Scotland UK

[@popeyetcj]

You guys rock josh

[@charleskazee1869]

Hulk to the rescue LOL. Is most your calls containers? Thanks for sharing... Much love... Stay healthy and safe

[@PepesTowingService]

A lot are because of our proximity to the ports

[@terrysadventure1529]

That company needs to put yellow poles or a concrete wall along the washway.that way that problem won't happen again.. on that load they should have used load locks to hold them in place that's my opinion about it..... Have a Blessed day my friend God bless

[@texasgilley9533]

You save day again 👍😎

[@harveystephens6115]

What a mess!!!! Good job though as usual. Enjoyed.

[@R32R38]

Having an unfenced ditch like that in a crowded trailer yard doesn't seem like the smartest idea.

[@silentepsilon888]

if there was a fence, it would get smashed in less than a week by trailers getting backed into it.

[@larrybrown7273]

Rigging'Towing CO's are a Good send'most people don't most agreements with City'State Agencies well done Man

[@williambilloverbeck5244]

CLEAN truck, props

[@gregjeffcoat4258]

Graduate of the Homer Simpson school of trucking. D'oh 🤪

[@MrLouie75]

I don't know what your guidelines are for operating their equipment, but I'd never let a truck driver move anything hooked to my truck. It's way to easy for a bad driver to roll your truck and they don't need to try very hard to do it.

[@PepesTowingService]

Not everything is so black and white. I had a ridiculous amount of slack. Worst case scenario he guns it and hits the wall right in front of him, I'm still safe.

[@MrLouie75]

@@PepesTowingService Good point about the wall. A company I worked for about 20 years ago had a 50 ton Kenworth wrecker flipped over by a driver he was pulling out of a ditch. I wasn't on site, but I was told the driver only went about 20 feet and it took the wrecker over.

[@Elchoferr]

ERES CHINGON BRO...

[@renehunneman]

And yes, he is the best truck driver I have ever seen hi, hi. Oh my Lord...

[@edwinschlee8374]

The first trailer was fairly easy! Why didn't they fasten those bags to each side of the container to keep them from shifting?

[@PepesTowingService]

Asking the wrong guy lol, I didn't load it. Driver was lucky he didn't flip

[@orreymodo5860]

7:38 are those racing slicks?, baldest tires I have ever seen

[@PepesTowingService]

Ya he was headed to the track after this 😂

[@silentepsilon888]

yeah, he's a professional trailer drifter

[@madcat1s]

Blees you guys stay safe from a viewer from the UK

[@dachief948]

Love me some Hulk. You’re ok too.

[@michaelsullivan4197]

Who ever loaded the container with scrap metal screwed up should have loaded the bags 2x2 which would have evened out the container and the load would not have shifted shipping 101.2 load management

[@machellep1]

Hey all okay at Pepes , no videos in awhile ! Miss your content.

[@imchris5000]

the first one looks like he just backed up to far its easy enough to do in a diagonal spot with a tiny curb

[@Fossil1111]

Hi, I was wondering is your company going to get one of those m100 100 ton rotators from miller?

[@TowMan127]

Nice

[@msnpassjan2004]

Hello Josh, we have not heard from you in awhile, hope you are doing well !

[@dirtturret]

Just wanted to ask about the durability of Your Galaxy Z Fold Phone? Do You still recommend it for the heavy industrial industry? Thank You.

[@pcranebmw]

Like butter.

[@deernutOO]

Missing Pepe's.. hope all is ok with you all.

[@philipporter3339]

Hi don't sopose your thinking about getting the Miller 100 ton rotator?

[@normanhopkins6114]

Why do you use different setups for the 2 sides?

[@discgolfdroneguy1]

Hopefully your hulk hard hat comes in soon

[@lindasherman9921]

Container week at Pepe's.

[@bobbyblack6871]

Would you consider using synthetic winch line on your equipment?

[@redneck1087ndl]

For the smaller trucks like rollbacks it would be ideal but for the amount of weight that these rotators use Synthetic line would not be ideal to use as it could fray easier and doesn't have the same kind if weight ratings steel cable does

[@PepesTowingService]

No, would not be able to use my truck for CHP if I did. If I had the choice tho, I'd do it in a heart beat

[@albertcastro461]

Was the freeway job in Anaheim??

[@philipporter7650]

Hi are you going to do any more videos

[@OzMacro]

How bald are those right rear tyres?

[@thomastaylor298]

Always something different in Los Angeles.

[@bassheadsofvanwert1007]

That looks like it might flip on its side there. Hes Lucky it doesnt take him over and your there to get him moving again. Pepe to the rescue my friend lol.

[@jrantman]

Ocean network Express. Recently lost 1900 boxes from shipline

[@glennjukes5581]

So now--there is anpther problem--when they get to the delivery point-some one is bascally going to have to go in there and un load that scrap by hand. But not your problem.....

[@markbyers6124]

You would think that was a swift lol

[@tomflores5808]

I don't see any new videos..put Plaza Towing M India has been posting up like crazy

[@imperialguardsman4361]

ONE has a lot more containers like that in Japan

[@fredashay]

Why on Mars would they put a ditch right there?!?! Somebody had to know this would happen someday!

[@PepesTowingService]

Probably for drain purposes? It does seem sketch to not have a fence or something. Would have flipped if that other container wasn't there

[@scott9676]

It was put there free by Pepe's Ditch Laying Service 🤣

[@gregjeffcoat4258]

Well they have to keep the boys working. This is no time to be unemployed.🤪

[@PepesTowingService]

😂😂😂😂😂😂

[@machellep1]

It’s SoCal , they do everything without thinking about the consequences.

[@adiilahbibimahamoodally9072]

How many tons your crane

[@PepesTowingService]

50

[@jimp.4531]

NICE TWOFER.

[@deernutOO]

Still missing Hulk and Pepe

[@gregvill9068]

check out the tires on that legal?

[@stellarproductions8888]

Yep, them tires are far too bald, and would not pass DOT inspection. I'm thinking their condition is indicative of the same problem where the tandems were in the ditch. I think a combination of the driver, and the company he works for, is at fault there.

[@СтепанБандера-ы8у]

They look fine

[@machellep1]

Hey Josh I was at a car recovery from a river with Adventures with Purpose ( another KZbin channel ) recently and another observer had on a Pepes towing t shirt . I almost begged for it. How do I get a t shirt of my own ?

[@PepesTowingService]

Are you talking about David Mack? He always rocks my gear. We have a website, it's in the description of every video I do!

[@machellep1]

Just saw that ..lol I’ll be shopping thanks , do you sign them ? I have placed my order .

[@dandunning4409]

Nice job Josh. My Birthday is coming up so you think your Dad could buy me a Rotator like he did for you?? Can't blame a guy for trying right. 😂🤣😂🤣😂 By the way do you have the screen read out at your control center on Hulk that shows how much weight your picking??

[@stellarproductions8888]

Ya, the cheapest rotator is like a 600,000 dollar truck. A midrange model fully equipped with gear would be closer to 1-million like Ron's truck, so the answer is no. And don't forget, HULK is his truck to operate, he does not own it, it belongs to the company. ;)

[@discgolfdroneguy1]

His remote is the same on ours and no it doesnt. But there is a screen on the truck that will show it

[@dandunning4409]

@@stellarproductions8888 Seriously dude?? I believe I was talking to Josh not you.

[@dandunning4409]

@@discgolfdroneguy1 If you read the post correctly you will see that I did NOT ask if he had a readout on his Remote, I asked if he had one at the control center on the back of the Wrecker where all the controls are located. It's obvious that he has nothing on the Yellow Remote that he uses.

[@dandunning4409]

@@stellarproductions8888 I am aware of the prices that a Rotator could amount up to. I was in the Towing&Recovery Industry for 15 years. Way before Rotators came out in fact it was before Heavy Duty Wreckers had Wheel Lifts or Underreaches. The 50 Ton Challenger I operated had 2 winches on the boom and 1 Bull Winch at the rear. My post was a joke to (Josh).

[@ghhtrainmaster]

What’s he giving you attitude for ? Lol 😝

[@pebber1967]

Josh, where is you'r helmet DUDE!

[@KB-gs8zi]

Sir Josh & Jonas !!! Great Job of Communicating for the container !!! Josh ,,, Great work with the 1st container as always NO damage done again !!! It's about time for another MOUNTAIN recovery again with the ""HOLIDAYS"" coming & ALL of those ""XMAS PARTIES"" !!!HAHA Have enjoyable ""HOLIDAYS"" with Friends & Family !!! ""KEEP IT SAFE ""!!

[@Hithere-xx1gk]

Should have k rail or bigger curb to stop stupid drivers from backing into the ditch and if it rolled by not setting the brake he has no business in a big rig

[@stevenraymer904]

What a mess

[@dt20m84]

👍

[@maidenfan4927]

🤘✌️

[@mjk4147]

As soon as you said "I need to go higher" I started looking for your "Arc Nemesis"!

[@garywatford9801]

Hello Sir Josh and Mighty Hulk, another well done job of thee moment of truth with real time reality. Josh you and Hulk is the best, With Hulk their's no need for Big Flipper! 😁😆☺ Lol, Big Flipper! Is the back bone to Your Dad's dream. The one and only special built 75 tons Rotary With No Under Lift. Enjoyed watching reality without reshoots faking it until you make it. Great job, stay safe Healthy. 😊🚥🚦🚧🚚🛣🚔🚑

[@derekstrawn1234]

6/3/21 tllu5624449 leaving Yokohama, Japan

[@steveblake8766]

#399 thumbs uP

[@jerrykinnin7941]

Been there done that.

[@PepesTowingService]

Amazing input, and here I thought I was the only one in the world that's ever done this!