attach your cover sheet to the top of the press, BAMN never worry about it again :)
@leohuab3 жыл бұрын
great info…and nice video…i’m gonna try to layer on stripflock pro…i’ve been using this material but never known you can layer on top 👍🏻 thanks again
@SiserNorthAmerica3 жыл бұрын
yep! you absolutely can! Please make sure you share your project with us once you try it out :)
@staceysclothescorral39082 жыл бұрын
That was awesome! You made it look so easy lol !
@heatherrobson58092 жыл бұрын
Great video! Easy to understand and follow!
@FlipGal672 жыл бұрын
Once again, another great and informative video! Thanks for your help and enthusiasm!
@SiserNorthAmerica2 жыл бұрын
Thank you so much, Valerie! so happy to help
@moniquesteeledesigns3 жыл бұрын
Love easyweed matte it’s my go to in black! Please make more colors!
@SiserNorthAmerica3 жыл бұрын
We hope to!! But, remember, our EasyWeed Stretch line is also a Matte finish with 85% of those color options. :)
@reginelongchamp7052 Жыл бұрын
Hello. Can I layer a clear HTV on top of sub block HTV and then sublimate on the clear. The shirt is a dark blue cotton. If yes what temps do I use. Thank you
@mw3designs8 ай бұрын
I have to run a batch of basketball jerseys that need logos on the front / numbers on the back. Done them many times, but this batch is reversible. I’m doing white on one side red on the other and I’m worried about the htv sticking to the inside of the jersey once I reverse it and press the other side. Any tips for this?
@SiserNorthAmerica8 ай бұрын
Make sure to put Parchment paper in between your layers to prevent any sticking 👍
@joycetaylor256410 ай бұрын
Thanks now I know what I did wrong.
@obobob18672 жыл бұрын
Nice patagonia---I meant siser.
@jackwoods8061 Жыл бұрын
Nice volume and diction. Refreshing, thank you. Helpful vid too.
@SiserNorthAmerica Жыл бұрын
Thank you so much for watching! :)
@shevyjaikaran76312 жыл бұрын
I'm pretty new to siser I wanted to know why is the black and white easyweed stretch siser not cutting throughout the vinyl I did place it mirror down. I have a cricut any advice?
@SiserNorthAmerica2 жыл бұрын
You shouldnt be experiencing that.... please reach out to our Tech Support by emailing support@siserna.com
@cmspnutty80012 жыл бұрын
Have you done a video, or can it be done for layering, or knocking out a higher temp like Siser Brick, with Siser EasyWeed?? And could you combine, layer, or knockout using Siser Easy Subli also?? Thanks!
@SiserNorthAmerica2 жыл бұрын
Hello! you can combine EasyWeed and Brick as long as Brick is the top layer. You can also use the knockout method for any combination of Siser HTV, including EasySubli. EasySubli is not recommended to have anything layered over it.
@sniff4fun Жыл бұрын
Can glitter HTV be layered on top of stripflock pro?
@SiserNorthAmerica Жыл бұрын
Yes
@lindagiddes4551 Жыл бұрын
Can you use easy weed regular vinyl as a base for the sister puff on top?
@SiserNorthAmerica Жыл бұрын
Yes
@cmb-w3 жыл бұрын
🎶Hey Joe, where you goin’ with that weeder in your hand?🎶 Seriously, love the video but especially the Jimi Hendrix design!
@JazzyJae882 жыл бұрын
I never knew about the one minute tack method. Good information.
@SiserNorthAmerica2 жыл бұрын
its one of the best parts of our product! Helps speed the process up and helps with registration :)
@Leadership_matters10 ай бұрын
One minute? That is if you use your heat press for making quesadillas!
@annetteswanson84612 жыл бұрын
What temp do you press easy weed onto 100% polyester?
@SiserNorthAmerica2 жыл бұрын
You can press a little lower around 285 for about 15 seconds
@anthonymcglocton84582 жыл бұрын
Great video.. .I am a beginner..I was wondering how do you ..or do you have a video on how to separate the images? Thanks you
@SiserNorthAmerica2 жыл бұрын
We dont as of now, but we can create one! Great request, and thank you for watching!
@beverlybuford90552 жыл бұрын
Love this video…and the product! You make it look so easy but I’m wondering where you got the pattern with all the pieces….and are there instructions on how to layer it?
@SiserNorthAmerica2 жыл бұрын
Thank you so much for enjoying! Are you referring to our Holographic HTV? Please send us an email at info@siserna.com and we can help you out :)
@shakeloose12 жыл бұрын
Awesome!!!! Great tutorial!
@heathermolsbee57513 жыл бұрын
Great video! Does the one second tack help with HTV shrinking when doing the knockout method?
@SiserNorthAmerica3 жыл бұрын
yes, the one second tack does help prevent shrinking, but is not always exact. This depends on the fabric its being applied on. The thinner/stretchy materials can still possibly warp.
@chrisc75663 жыл бұрын
THANK YOU FOR VIDEO
@sandiregan29332 жыл бұрын
Does the design come out pixels or is it just mine? Like not a smooth image.
@SiserNorthAmerica2 жыл бұрын
Which HTV are you using?
@sandreawhite75342 жыл бұрын
awesome
@kawestley19652 жыл бұрын
Grat tips
@julesrivera53002 жыл бұрын
Do you sell a soft vinyl for layering by chance? When I use multiple layers the image tends to be plastic-like and it has a hard feel to it. Alot of my customers don't like the feel so I'm curious to if you have a different type that has a softer feel? I love Siser and its the only vinyl that I use so I hope that I receive a reply. Thank you in advance.
@SiserNorthAmerica2 жыл бұрын
Hello! The thinnest we currently have is our EasyWeed Stretch. This will give you the softest feel when layering.
@chantelb41262 жыл бұрын
Use the knockout method. I do that all the time instead of layering on top of bc I don’t like the feel. So no matter what material you use if you knockout everything INSTEAD of putting it on top it will feel as if you used 1 layer! Hope this helps