Hi, what are all the components required for the software and cables to reset the clutches etc....i really want to DIY but I haven't got any of the stuff required to do the VCDS part. Thanks
@DankosDIY4 ай бұрын
If you get vcds all you need is lead which is Hex v2. It's what I use. Regards. 🍻
@gregsummerton91244 ай бұрын
Thanks, can you recommend a place to get the cable from? The ones I've seen are very expensive. I'd to software free? Thanks
@DankosDIY4 ай бұрын
@@gregsummerton9124 soft and cable I got of ebay UK. but try fb marketplace Perhaps someone is selling it.
@elwdriver4 ай бұрын
whats the way you use to get the temps correct?,
@DankosDIY4 ай бұрын
Start the engine and let it idle for few min. Connect ur diagnostic tool and set it to gearbox temperature. 👍
@elwdriver4 ай бұрын
@@DankosDIY cheers
@Adam.minyan6 ай бұрын
r u sure it works to fill the oil from the oil filter gate?
@DankosDIY6 ай бұрын
Yes mate.
@Max-io3he3 жыл бұрын
Brilliant video mate, is this a good gearbox oil?
@DankosDIY3 жыл бұрын
Hi, yes i use this company for all my cars and never had any issues. Im not sponsored by them just wanted to show what i use. I recommend that. Regards
@GrandAdmiralHamilton3 жыл бұрын
What exactly are you doing when you go into the Basic Settings page? I can see you type in a group number but what is happening after that?
@DankosDIY3 жыл бұрын
From the beginning you check the temperature of fluid in the gearbox. Temp has to be between 35 and 45. Then you do basic settings. This means you reset the adaptations of the clutches. Simply the Gbox ECU learns where is the binding point. It also shows u the tolerances. Its good thing to do. As the clutches wear. Hope this helped. If you got any quesitons ask. Also Like and Subscribe for future interesting tech bits. :P
@Jamescarter4202 жыл бұрын
@@DankosDIY what diagnostics software are you using. Would this be the same method on the skoda kodiaqs? 2.0 tdi dsg. I've seen a skoda video where they fill from the bottom through a tube when that inner plug is put back in?
@DankosDIY2 жыл бұрын
@@Jamescarter420 hi, good question. Im not sure how it is on newer cars as the box might slightly differ. Best thing would be to compare the box from the top and bottom. If filters are in same place and drain plug i would go ahead and do the change. If you unsure about it search for any technical data. Software is VCDS 2020 edition. Greetings LOO. Any other question please ask and ill do my best to answer! 🤝🏻
@donataskugelevicius72392 жыл бұрын
H,i in some sources i find out that 2,0 tdi dsg gearbox capacity is 7,2L. So if u filled it with 5,5L then in the box left 1,7L old oil?
@DankosDIY2 жыл бұрын
Hi, im not sure how much oil goes in to them but i refilled enough so the oil did flow out at the right temperature. Could be that there is old oil in thr box. Not sure.
@siderkeremidov65762 жыл бұрын
Super 👌 I'm driving skoda superb 2018 7 speed dsg Gearbox code DQ381 & 0GC garage clenched gearbox for me. How can I check gearbox condition on the obdeleven like VCD. Thanks 👍
@DankosDIY2 жыл бұрын
Hi pal. Tbh. I have never used that diagnostic equipment so cant rly say. For vcds there are measurement blocks which connect so certain part of the box and check it but for that obdeleven i dont know. Sorry.
@siderkeremidov65762 жыл бұрын
@@DankosDIY thanks
@vinoth5593 жыл бұрын
how many liters oil taken for process ?
@DankosDIY3 жыл бұрын
I had 6L but gearbox took around 5.5L if i remember right.