Sliding door stuck? How to replace the rollers.

Sliding door stuck? How to replace the rollers.

[@Shazmunki7]

Thank you so much! ❤ Great video instructions. Hubby & I just fixed our sliding door in 20 minutes. After 8 years of a stiff sliding door😅 I was about to call in a pro... now we're the pros 🎉

[@randymarsh5088]

Thanks to this video I am finally going to fix our patio door after 5 years 😝 my wife sends her appreciation

[@rohmatbubut-um4ug]

❤

[@anthonyvasquez3785]

lol minor fixes that that make life easier

[@frikkiechalmers3086]

You saved me from getting a pro to replace the rollers... Thank you! Just needed to raise the wheels. Was looking for a local "doors smith", when I stumbled upon this piece of gold... ❤

[@thekoleroy_at_varsity4103]

watched this last night probably around 7:30am today at Gelmar to buy new wheels 😃 . did the job less than 30mins thank you very much . my wife gone be happy when she comes back from work

[@samTollefson]

You might also add that if your track is corroded at all it will eat your new rollers, you can buy SS track liners that are a "u" shape that you can caulk down over your existing track and have a nice new easy sliding door and longer-lasting rollers, and it's an easy job also.

[@dzerres]

Very good, thank you. My slider totally froze up just as I was closing it for the final time before heading upstairs to go to bed. Panic. Not sure about choosing a new plastic replacement but these days that's where we are. Oh, one more tiny hint: take advantage of the slider being out and clean up the track thoroughly - you won't get another chance for about another 20 years! Thanks again.

[@armond360]

Absolutely perfect instructions. Thank you for these clear step by step instructions.

[@terryloftus1535]

Thanks mate, 6 years with stuffed door and I couldn't workout how to get the door back in as rollers stuck out ,now I know what the screw is for ,to lift the rollers, good video mate.

[@rredington305]

I'm starting to do more and more DIYs around the house to save on contractor's cost. Thank you for this video, it's definitely going into my collection.

[@gunsnwater2668]

Thank you, my door came off the bottom track on 1 wheel and I couldn’t figure out how to get it back on. One little screw. Proves you don’t know what you don’t know. Thanks again.

[@Shantanu85]

You, sir, are a scholar and a gentleman! Thank you.

[@mrrizkat]

Excellent video, thanks for showing the actual roller and explaining each step clearly!

[@ganeshchsamaddar4381]

YOUR INSTRUCTIONS are very helpful to me ..thank you

[@genesis667]

My door was not rolling well at all...I turned the screw and raised the door and now it works perfect...Thanks!

[@johntabone686]

Thanks for the vid. Very informative and easy to follow. Wife also thanks you after a year of dragging heavy door over very warn rollers. 😀

[@lukeplo]

Very clear and concise instructions. Thank you!

[@colinmakams]

Practical videos that are straight to the point all the time. Keep it up!

[@NeoMorphUK]

Thank you for the video. Helped a ton. I had a frightening experience this last weekend. My door kept jamming and riding up… and then what was worse was the door dropped totally and the top came out of the runner and started tipping out. Now I have EDS meaning I dislocated joints easily but when I saw the door falling I just dived outside to stop it completely on adrenaline… and popped both shoulders. The rollers really needed replacing YEARS ago as the door is about 20 years old. Oh well, you live and learn.

[@AG-yj1jv]

Thanks for the EDS warning! My buddy & I both have it - will be extra careful changing rollers & watch out for tipping. Hope you were able to pop them back in & healed up quick!

[@user-zr9ec7ew3d]

Thanks for sharing how to do this. Really appreciate the detail and how you show each step.

[@MrJason218]

This is exactly what I'm looking for. Thanks for uploading the vid. Very helpful

[@tejasgihwala1313]

Hello from South Africa. This was such a great help thank you!

[@archowdhury1458]

Thank you so much. Very useful video with detailed instructions.

[@lavhen4778]

Perfect, I’m gonna do it myself. Was thinking of calling someone. Thanks for the video

[@summerrain4314]

Very clear zoom views and very clear spoken instructions. Thank you.

[@davidbowen7788]

Great video. To help with others searching, this will work with Prime-Line D1525 (1.5" patio door roller assembly)

[@shahidmir106]

Thank you so very much. It was wonderful easy to understand.

[@ivorythokoane9032]

Thank you for the video I have been having this problem since two weeks after installation I'm going to fix this your presentation was on point thank you again.

[@marthinuscilliers3726]

Lekker video! Baie dankie. I’ll be doing this is South Texas in a few hours.

[@andersoncesario26]

Thank you very much! Just did as you instructed and worked wonders 👌

[@FishingWithMichaelTruong]

Excellent video and the best instructional I've seen on KZbin thank you :)

[@simbamom452]

My door is extra large/wide and is so bad I broke the handle trying to close it. I have watched several videos on this subject and yours is by far the best. thank you for your time and clear instructions, new sub:)

[@rugubalanaidoo5714]

You made it all so simple.what a weight off my shoulder. Thanks my mate

[@cheryl-annemonckton680]

Thanks for the insight but I'll most likely need several people to lift my glass door it's old and very heavy but you have inspired me if I could only remove it from the track I'd be able to repair it so for me it looks like I'll have to call in the professionals more money but the door is way too heavy for even two people Thanks for the information and video it was great

[@yukiguo9324]

Thank you for these clear step by step instructions.

[@crichton269]

Great video. Excellent, clear communication.

[@archiepezek]

Thank you for the information. Excellent video with clear instructions.

[@johnconnor513]

Thanks bru. You are a legend 🇿🇦

[@01Snay]

So so helpful. Yours looks like the 2.4 x 2.1 I have. It's been stocking a but and I've been worried that the wheels might need replacing so thanks for this

[@danalaniz7314]

Really excellent demo. Thank you so much!

[@Aesir5]

Already done my sliding door but damn this is a great how to. Thank you

[@mschirm1]

Thanks so much! Really helped a lot to fix my door! Appreciated!

[@nightcoreisland5244]

sorted out my problem , thanks

[@learnwithlearner4895]

Thanks a lot, I could fix my door, next weekend will replace the windows. On my own 👍🏻 :)

[@shahanazparvin1355]

It was a very good tutorial.❤ nicely explained and showed

[@user-re6rr6zg4h]

This saved me a lot of money. Thank you for the detailed instructions! :D

[@brianwatson2693]

Very informative and well done!

[@hugo4768]

Thank you for sharing your knowledge, it really helps!!!

[@rohmatbubut-um4ug]

Terima kasiiih ber baginya pak ini sangat ber manfaat ,,salam sukses buat bapak di sana ,,,🙏🙏🙏

[@davidzhang9760]

Amazingly helpful video, thank you!

[@kiwitoffee]

Wonderful. This is exactly what I need to know. Many thanks.

[@HumanShield777]

This has been so helpful. Thank you so much sir.

[@jamersonshook]

Thorough, clear, I owe you a beer....

[@gwenquinn2683]

Thank you for great video greatly explained well done

[@katbosh7748]

Excellent. My slider never worked right, was stiff. Ill try to fix it and it probably just always had a defective roller!

[@mikerobinson3232]

Thanks, looks like my problems will be sorted out

[@evapendaki2530]

Thanks for the explanations Dom

[@peterhenson6303]

Thanks mate', easy clear instructions.

[@samueljaramillo4221]

Very helpful video, thank you.

[@abdulrahmanyousef7686]

Thank you for this awesome video.

[@richard0807]

Very helpful, sir. Thank you!

[@candetect7576]

Very clear instructions, thank you

[@simobuthelezi5525]

Thank you so much, you just saved me a lot of money.

[@karend.9218]

Fantastic, I’m in a condo and they are not replacing the doors but I can replace the seized rollers! Just have to find the pieces now…..

[@malcolmvale7805]

Cheers Paddy good one.

[@jackinnis4288]

Thanks for the video. Even the same rollers I have. AAA+++

[@JCEst-xv3cn]

Very helpful and informative thanks

[@wmoy8507]

Shoot some WD40 on the housing to help make it easier to remove. Nylon wheel on a metal rail will not last long. Need to replace with a metal wheel and add some grease onto the bearings before installation for a longer life

[@ytrew9717]

you are my heroes! THANKS

[@ShaunMahabeer]

Very helpful. Thank you!

[@AG-yj1jv]

Unkie's doors, exactly! Thank you - we can do this!

[@user-od9kw7wb4j]

Thank you the video sir. By the way do you know where I can buy to the track because mine is worn.

[@abdullahjafar7609]

Thanks man! Really helpful!

[@JRs-guitars]

Thank you for this video!

[@damianj4700]

Great thorough videao.. cheers

[@sabasworldfamous]

by-the-way it's clockwise and counterclockwise thanks for the video

[@luckysakonta2718]

Thank you, that was helpful

[@daviddrouillard3534]

Good detail. Thanks

[@fairworld2522]

Thank you. It’s a great video

[@muhdbunahmad]

You've saved my day.

[@johnbentley645]

Thank you 😊 Great Job

[@user-ry1dn4if3v]

Thanks this helped me a lot

[@Jimmy-sd7xz]

Very good video.

[@stevenlow6222]

Tks. Was very helpful

[@MrMangoman48]

Beautiful good job now I will do my

[@pjamajones8304]

I have a very wide heavy door, not sure if the new plastic rollers will last the 40 years the original cast aluminium ones did?

[@lylejones6575]

If the rollers are rusted and the adjustment screw doesn't work can I just remove the upper screw and hope the weight pushes the wheel up into the frame

[@HamzaKhan-be7jt]

Very good video

[@MrMangoman48]

Where we can buy this wheels thanks 🙏

[@BuraSoytan]

Very nice. Thank you so much...

[@ssnegi20]

excellent idea

[@davidbarbero6212]

I find that if you lubricate the runners with grease it will prolong the life of the door.

[@kiwigirlNZ]

I wish that worked on mine 🥴

[@dripsa]

Thank you for this video. really helped me to replace the wheels on a door. Had to take the entire security gate down in order to do so, but I did it! I had to bend the wings though, is that normal?

[@philncider8077]

Does the sliding door has specific rollers to use?

[@sherealtalk161]

Can the glass be replaced in my medal frame sliding door?

[@sandraleng5331]

Hi Sir, instead of a single wheel, can replace with a longer replacement with 2 wheels, for stability sake?

[@michelewoods8221]

Do the roller assemblies not screw to the frame at all? I have a door identical to this, but the old parts i pulled out look nothing like that wheel assembly. In fact, there are two screws - one that adjusts the height of the wheel and another one that screws it against the short wall. Of course, I'm adjusting it every other week, even with the brand new assembies I put in, and they wobble side to side as it's just a long (stripped) screw holding it in place now. Just shocks me that it's not secured to the frame, just sitting there

[@liquidsmokemustang1537]

That’s great IF…your slider is outside to the stationary pane. Mine is the other way around so, I have to remove the other pane to remove the slider.

[@lalaji92]

Thanks u sir for useful info

[@ashwarn006]

Thanks mate, it helped

[@carlosz7208]

Can you replace a single wheel with a dual wheel? Thanks

[@rajuathokpam]

Brilliant.

[@BobZvezdin]

Hi there. In my situation the screw is stuck, can't turn it at all. I tried the CRC but no luck. Any idea?