SLO 100 with the Ampero | Deep Dialing in the SLO 100 on the Hotone Ampero

[@TaylorDanley]

Hey guys thanks for checking out the vid! 🤘 SUB 🧟‍♀️🧟‍♀️

[@johnschober4008]

With the balanced outputs on the Ampero, if you run both L and R into a DAW can you run one with a patch on and one as on unaffected DI track?

[@lucasvata2051]

Any chance for a deep dialing series on the MX5? I find the Ampero to be much easier to dial in for high gain and either I am missing something on the MX5 or it is not good for high gain amps... I think it is me missing something. Thanks and your content had been invaluable to me

[@vondragonnoggin]

Nice to see you still putting out videos featuring the Ampero. Due to the current situation in the world, I have decided to hold off on any Fractal Audio products for a little while but frankly still very happy with the combination of Ampero and Two Notes Torpedo Cab M. Sound and feel is very satisfying and gives ability to tweak power amp simulation with the Torpedo. I haven’t actually had to tweak anything on presets since setting up all my favorites months ago. I just plug in and play and stick to about 10-12 presets I really like. I also haven’t heard any video presentations from any other modelers that make me want to ditch the Ampero/Torpedo combo. Just enjoying turning them on and concentrating on playing.

[@TaylorDanley]

Hey, that's awesome! If it works, no need to change it. I've mentioned previously, but my decision to get the axef was due to consolidation with backing tracks. We still wanted stage amps, so this was the easiest option. Like 98% that, and 2% flex lol

[@peterschaefer1665]

Frigg I can't get over how good that unit sounds. Then you get units like the Boss GT1000 that clearly has the processing power but doesn't have any usable amp models.

[@TuckOfIron]

Dude I loved your blind shout out video and it made me that much more confident in the Ampero that I liked that model the most. Mine should be here tomorrow.

[@TaylorDanley]

Awesome, let me know how it goes!

[@jcarnabuci]

Love the fact that you own the FXIII, yet still do Ampero videos. Bravo sir! I know what you mean by that clipping sound in the Ampero. I have a hard time getting rid of that as well. Do you know if that has to do with maybe the volume stage on the Ampero patch, or is something we have to tweak somewhere else?

[@TaylorDanley]

🙌 thanks. I think it has to do with the gain staging. Usually if you look at all the volumes in the patch, you'll fine one that's clipping. In my case I had the master up too loud

[@yusuffhimself864]

as I watch more videos from you, I told myself "that's it. I will buy hotone." yeah new subscriber, new fan of yours.

[@TaylorDanley]

🙌 thanks for joining the party!

[@joristimmermans5058]

"Some people like that mids-forward presence" - Yup ;-). Great video though, the best one yet to give me some idea as to the capabilities of the Ampero. I think with the Guvnor and the 5150 model, I may have a sound I might like to chase... No prizes for guessing.

[@TaylorDanley]

Thank you 🙌 I know, I really want to use the gov as a boost in some of my patches now..

[@labyzoune5751]

The gouv with a 5150 is what Carcass used to the tone of Heartwork. One of the best tone ever recorded.

[@TaylorDanley]

@@labyzoune5751 that's funny, I didn't know that. I actually have like half. Heartwork cover completed that I never finished.

[@labyzoune5751]

@@TaylorDanley kzbin.info/www/bejne/eajbhp9viq96ZpI

[@joristimmermans5058]

@@labyzoune5751 Exactly ;-)

[@apoplexiamusic]

the tone really "Metalled up" with the Super Drive holy shit

[@TaylorDanley]

❤🧟‍♀️🤘

[@johnschober4008]

Got an Ampero on the way :D

[@TheDeedeeFiles]

Killer Tone man. Have a good day.

[@elkuervojuarez1890]

That was really good bro!!!! I'm old and im new to all this modeler world. I recently got a mooer ge200 and I noticed you had one on your table. I know its an old unit but if you do have the time to do a similar thing with whichever amp that unit has that you think is the best would be great 👍. I'm glad to be a subscriber

[@quantumsolaris3546]

Hey Taylor! i've quickly become a huge fan of your content! how would you think the ampero would handle a live scenario playing Groove-death metal? i "lead guitar" am currently using a Peavey Ultra Plus 120, which is extremely heavy to carry around.

[@TaylorDanley]

🙌awesome, thank you! I think it's super versatile for anything! I used it for a while before going to the axefxiii for the routing options.

[@kamilchosta5526]

Since you ask... I would love to see a jazz, funk sounds. And this warm, edge-of-breakup dumble sound dialed in on the ampero :D Thanks! :D

[@stevemoore6349]

Thanks,I prefer this over the pod go..surprisingly rich tones

[@tattoofred]

Thanks very much for this video ;) right now it just got to me and I'm testing it with your videos

[@suniso370]

Whenever there's an editor or a DAW opened in a youtube video, I find myself trying to click buttons and scroll over sliders.

[@TaylorDanley]

😂😂😂

[@primordialhumandwarf]

@taylor Danley your drop box links dont work anymore for the ampero videos, could you please reupload or post a working updated link ?

[@modelbass]

Hey Taylor! Awesome vid. Gonna actually do it and watch complete later but my question is how do you have it setup. Another words where is sound coming from? Your amp or through your computer speakers? If I want to run it through my computer monotors. do I just plug it into my Scarlett interface going into my PC where I normally plug my guitar into or what? Thanks Taylor! Awesome channel, keep at it!

[@TaylorDanley]

Thanks! 🙌 I always go in to my audio interface (apollo twin duo). I have, and do use it through my amp sometimes, but you guys are hearing this direct from ampero>UAD apollo. I'm monitoring the sound through my studio monitors. Hope that answered your question!

[@modelbass]

@@TaylorDanley Absolutly bro. Ive been at this for over 35 years as Im 50 now but the computer part of it as far as musically is newer to me. Kids your age grew up with guitars and computers combinded. Thanks again!!

[@kcrich1310]

I don't always watch guitar related channels on youtube.........but when I do..........I prefer Taylor Danley's channel......... You can keep using the Ampero and trying out Engls and Diezels. Or even the Marshalls........ Who would have thought that yellow drive would sound so good. At first glance you'd think it was for a 50s or 60s Fender clean tone.........

[@TaylorDanley]

😂😂 thanks for that. I feel like you're gonna be stoked on next Mondays video.

[@alraymond1618]

What's your experience/suggestion for use of the Noise Reduction feature, especially id using the Ampero as an effects box, and not used directly to a Board. If I keep the Amp and Cabinet effects on, I get an inordinate amount of noise.

[@TaylorDanley]

🤔 what are you running it into? I've never noticed any excessive noise with it. I usually use the noise killer and dial it to around 60 with the fast attack (cant remember if 1 or 2 setting).

[@Spark-xu1mu]

Hey, it would be cool if you would play the Modelers through a real cab and compare them. Keep up your great work👍🏼

[@TaylorDanley]

The reason I dont do that is because of the microphone placement. It could easily be bumped while I'm switching them around and yield wildly different results. I do like prefer playing through an actual cabinet though!

[@Gohanndes1]

Can you do this kind of video with Soldano SLO and the AxeFX III?

[@TaylorDanley]

🤔 suppose I could

[@labyzoune5751]

When using the Axefx, do you ever use two amp patch for creating a "stereo" kind of effect ? I'm a Bias fx user and always use two amp panning one right and the other left. I use this when playing through Head phone or studio monitor. I don't when i play through a power amp+cab or when i record.

[@TaylorDanley]

No, never. I rarely use the thing to it's full potential. Sometimes I'll get crafty and mix 2 different IRs, but that's about it

[@apoplexiamusic]

dual amps rigs are so much fun! I used to do it all the time about 10 years ago with my Pod X3. I also do it all the time with amp sim plugins, whether it be BiasFX 2, STL Tones, or TH-U Slate (which has amazing sound for very little CPU usage)

[@angrydone3592]

Thanks for video.

[@callofsirensofficial]

Can you run an out to a powered cab (with the internal cab switched off) AND to a FOH desk (with internal cab on) at the same time? If so how?

[@Z1mmb0]

How is the ampero dealing with arpeggios/sweeping? Do they sound clearly?

[@peterschaefer1665]

Excellent video nice job!!

[@swmorgan515]

Hey Taylor thanks for the great demos of this unit. I have decided to pick one up. But I do still have one question: Can the Ampero have the cab sims disabled in the 1/4" unbalanced output, while still having it enabled in the XLR balanced out? This is pretty crucial for my live / rehearsal setup.

[@TaylorDanley]

Thanks! 🙌 no, you just have control over the L/R channels, and turning no cab mode on or off.

[@swmorgan515]

@@TaylorDanley hmm ok so there is no way to use the cabinet sims for a direct signal at the same time as using a power amp and cab without it? Seems like a huge design flaw. Deal killer for me...

[@TaylorDanley]

@@swmorgan515 yes, you can go L out with no cab mode on to your power amp, and then right out with no cab mode off (either xlr or 1/4") and run that to front of house. The no cab mode only applies to L and R, not 1/4" vs XLR if that makes sense

[@swmorgan515]

@@TaylorDanley ah ok. Well that will work, thanks

[@johnong2655]

I've used it quite time now for my bass. I feel the bass cab and preamp colour the tone too much imo. So far, for guitar it's quite decent and more open sounding than other multifx units at this price range. Sadly, due to COVID-19, all updates and bug fixes are halted

[@TaylorDanley]

😪 unfortunate. I was asked a while back to do a bass patch. I may do that in the future.

[@2008LethalMelody]

My God, I've already watched all the videos on the Internet (after buying Hotone), but they still don't bring this stuff to me in any way - what should I do while waiting? )

[@lekcjegitary-gd1dv]

all the presets in this video are without any additional purchased IR?

[@Terrysoddy]

When your using the hotone editor, what do you keep the knobs at on the ampero

[@MikeAndersonvinyloldies]

Is there a place to download and slot-in pre made patches from other users?

[@TaylorDanley]

Like a website? Not sure, but check the facebook group

[@AxZonChaudhary32]

Make Low Gain preset we would love to hear it

[@NineInchFailz]

in this vid are you running straight into the interface?

[@TaylorDanley]

Yep

[@Bbh4535]

Did I just see a patch called Dual Rectum? 🤣

[@TaylorDanley]

Yes. Yes you did..

[@Bbh4535]

Mega/booty- Dual Rectum 🤣

[@TaylorDanley]

😂

[@luca7x689]

7