SMK CP2 Air Rifle test Mod 15 Metres 17:04:2018

[@ambientfish1369]

Again Neil, that little tip from you solved the galling problem on my CP2, very underrated gun out to 20m.👍

[@iAteYourDog69]

What tip was that?

[@ambientfish1369]

@@iAteYourDog69 Smooth the breech end of the barrel with some wet and dry to remove the rough edge, makes loading a lot easier.

[@iAteYourDog69]

@@ambientfish1369 oh thanks for the reply, sorry I commented on a 7-month-old thread haha

[@ambientfish1369]

@@iAteYourDog69 NP bro👍

[@Redchilly-s2e]

Haven't bought mine yet but good info to know about a realistic range. This vid was 18, have you upgraded for 2021? I'm very interested to know, maybe I'm too nosey

[@rickyhobden2834]

I just dun this and it really does make a big difference to the feed and power not tryd accuracy yet thanks

[@stephengamble9388]

When used in single shot format, this is as accurate out to 20 yards as a Leishiy 1. £800 difference. Like buying a Ferrari to go to the shops.

[@richgcoop1842]

Good shooting especially for open sights

[@martinwilliams2141]

Hi great video. I just purchased one of these guns and I’m struggling with the pellets pushing into the barrel. What exactly did you do to make it better?thanks martin

[@martinwilliams2141]

Thanks for the reply. I watched the video and tried it and it now works like a dream :-). Thanks

[@bobdobalina1419]

Just came down here to the comments to ask about this. We just got the cp2 here in the states so I'm looking forward to getting this and smoothing out the action. Unfortunately it doesn't come with magazines here, and the moderator comes glued onto the rifle barrel.

[@santamulligan676]

If you drill it out with the 5.5mm drill will the gun still fire.177 thanks

[@carbide34]

I was Just wondering, I have Been going Over my New Diana .177 and Noticed that My Rifle Barrel Dosn,t have a Red Inside O-Ring ? is It Missing Or do you take the one off of your Regular barrel From the Pistol and put that in,? - or do you use the one in the little bag that,s about 1/4" O.D. in size, or is that one for the inside the C02 container? or do you know the size or a place where I can Order one? Thank,s!!!

[@sindento1942]

You should line the pellet trap with plumbers maite, works great, takes the ring out of the pellet impact. A tiny o-ring on the end of the probe cures the guns annoying habit of the bolt flipping up after every shot.

[@Redchilly-s2e]

Nice little tip if decide to buy it, thanks

[@extremedeano]

Great gun, QUESTION - what size bipod rail does this gun have? Where did you get your bipod from?

[@martialcappelle8698]

Hello nice vidéo , what your Bipod on your CP2 ?

[@reevessairgunningreviews5572]

A the time it was a very cheap bipod but I now use these instead.www.ebay.co.uk/itm/204254837653?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D251363%26meid%3De9c8ffc742c847e49730ea413658d50c%26pid%3D101195%26rk%3D1%26rkt%3D12%26sd%3D185789880644%26itm%3D204254837653%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv11WebTrimmedV3MskuWithLambda85KnnRecallV1V4ItemNrtInQueryAndCassiniVisualRankerAndBertRecall&_trksid=p2047675.c101195.m1851&amdata=cksum%3A204254837653e9c8ffc742c847e49730ea413658d50c%7Cenc%3AAQAIAAABQNaJCFP3eaFlNU%252FMPxRY0TCMczVKEUB5MsBytoCwPnd71M08lfrVO4PuTCchnU42KC4W4fZqxBROE%252BM7tSL%252BgZgL1kWiIUBRsEpydVTA61DhOJDUizwNgM7HKYQEqSaBlLrQs2DkwT0%252BvcK3NvTZGMF6%252Bd%252FVXD8Avfi20lxTizWKncsfX6H9v4NhFtIOYaAuHXsUzSN5y0YA6W3uY%252BJse3iYBBxwj2IiryguipCREcoNGW%252B5o8FYnXVbyxF%252Bj5SjqTone0KyckupK9rdcBfObS4VMvH%252FwImxCfC%252BoiM3Mi%252FT3LwTkQ%252BNBYcM9cpL4AqsaaR0papEBmf4F%252FA53LqI4vV3yWtaquF4I6NtnUAr%252Fx%252BB%252BXPrA5hetnzu%252Bec330gWmnh6VbXUQYSDYgy2XuppB2Cpeq5Bp96EqEhotJMYETUx%7Campid%3APL_CLK%7Cclp%3A2047675

[@reevessairgunningreviews5572]

I then strip them down to tidy then up. Video here.kzbin.info/www/bejne/foOtqWWadtiXm9k

[@Mrmancan]

If you are having trouble feeding the rounds check to make sure the O-ring is in the end of the barrel that the pellet loads into I had problems till I seem the O-ring was out but anyway cool video wouldn't mind getting one of those levelers where would one go

[@BoggWeasel]

Amazon, around the $10 mark.... (that's where I got mine )

[@BedsitBob]

Can anyone understand what he's saying?

[@Redchilly-s2e]

Don't make me laugh! I'm already in stitches. Ive just subscribed and going through his vids. I like his innocence about it though, going through the comments I understood what he was getting at regarding the modification. But I was wondering what some of the comments would say about the wind and just talking to himself while he's taking a shot. Made me laugh including your comment

[@PeterAgostiniJdcap26]

Could you write ✍️ down here your mod With the wind 🌬 mate can not hear a bloody thing . Thanks great 👍🏻 groups

[@reevessairgunningreviews5572]

If you check this video out it will show you what i did. The wind was very rough that day unfortunately.kzbin.info/www/bejne/pn2kcqONiN2qY6c

[@PeterAgostiniJdcap26]

@@reevessairgunningreviews5572 I understand that … never mind enjoy videos as you know. 👍🏻

[@paulg7443]

I seem to get a blast of co2 from the left near the bolt handle ,is this how its supposed to be of have I got a leak somewhere ? , the power is 551 fps in rifle mode

[@shaneweightman]

What bi pod you using please and at what cost was it ,, after one for my new cp2 cheers Shane uk

[@shaneweightman]

No reply was the answer

[@cheesybunny321]

How is that gun

[@santamulligan676]

There’s another vid with the mod apparently

[@addygrubber5351]

Couldn't hear a word, so no idea what mod you are talking about. Can anyone explain it?

[@reevessairgunningreviews5572]

@@addygrubber5351 very windy unfortunately. Watch all this.kzbin.info/www/bejne/pn2kcqONiN2qY6csi=iDbxi3Q-idnA0EBm

[@ChristofferEricsater]

At 25 meters, what precision can you get with 5 shots on a ten scale target?

[@ChristofferEricsater]

REEVES'S AIRGUNNING REVIEWS as long as you can focus on tje front sight it will work. Is there any red dot or and thing visible at the front-sight? Or can one install after market front-sights? Regarding the butt-stock and “suppressor”, where can one get that? Only seen a French youtube clip showing them

[@ChristofferEricsater]

REEVES'S AIRGUNNING REVIEWS i see... no worries.. will try to find a store to test it out in! Thanks anyways. Here is a good video for front sight focus that helps a lot... use it with a marge screen, like tv or laptop... is pretty awesome.. don’t think the excised works if using them with a smartphone though, needs a large screen or get the eye-effects! But is great practice :) kzbin.info/www/bejne/bJ2wiq2ApalnpJo

[@shaneweightman]

How cum you didn’t use the bi pod Roy , got a bag to rest the gun on ? And you must have picked the most windy day to make this video , can only hear half what your saying ,, cheers Shane uk 🇬🇧

[@davidkerrychubb1]

Did the power go up much

[@reevessairgunningreviews5572]

The power was a bit erratic, so consistency was rubbish. Afterwards it was very consistent, so accuracy improved. With 16 grain pellets energy was around 8.5 Ft/Lb

[@davidkerrychubb1]

Thanks. Best wishes Dave chubb

[@DarrenMalin]

thank you 😊

[@edgarmaynard9817]

that good as I have ordered one

[@davidwelch6796]

Sorry, I gave up on this video because I could not hear what you were saying.

[@reevessairgunningreviews5572]

Unfortunately it was very windy. It was more about showing the grouping in the Wind at 15 Metres.

[@shooterxchannel8102]

Very nice. 👍👍👍

[@jamico7]

Nice one good info really surprised.

[@stumpy260463]

what bipod do you use buddy

[@reevessairgunningreviews5572]

It's a very cheap one from Ant Supplies, around £10

[@stumpy260463]

@@reevessairgunningreviews5572 cheers buddy

[@nissan300bhp]

do you notice much difference really between the pistol barrel and the rifle barrel ?

[@nissan300bhp]

REEVES'S AIRGUNNING REVIEWS both i guess. I havint used mine a massive amount yet but think it looks better in pistol/rifle short barrel and for what it is im thinking is the power difference that great to keep it in full rifle. Plus im thinking red dot so i can keep my iron sights and be able to go bk to pistol with little bother

[@nissan300bhp]

REEVES'S AIRGUNNING REVIEWS not a massive gain really then. I .might leave it in p pistol

[@dicidooda4944]

Yes I have one

[@lawsonrichards1789]

Must say it's looks a good little gun.

[@marcoroberts9652]

What did he do to the barrel?

[@reevessairgunningreviews5572]

Watch this video that will explain near the end.kzbin.info/www/bejne/pn2kcqONiN2qY6c

[@supressorgrid]

Get much wind?

[@MrPlasma01]

only when he has beans on toast.

[@Redchilly-s2e]

🤣🤣🤣😷👍

[@mick4361]

I just realised he's nattering away to himself like a budgie in the background. Can't hear a word.

[@reevessairgunningreviews5572]

Not to myself, but to the viewers. Very windy so definitely not a Budgie. You really need to learn some manners.😂😂

[@mick4361]

@@reevessairgunningreviews5572 take notice, don't huff

[@reevessairgunningreviews5572]

@@mick4361 clean your eardrums mate.😂😂

[@mick4361]

@@reevessairgunningreviews5572 You really need to learn some manners mate

[@reevessairgunningreviews5572]

@@mick4361 😂😂😂😂😂😂😂😂

[@Docv400]

Nice job. I should be picking one of these up this week, really looking forward to it. Do you think the Pellets were getting deformed from the amount of force needed to seat them before you did the mod? That would certainly explain the improvement in FPS, consistency, and accuracy you found afterwards. What shape/size is the forward end of the Bolt, i.e. how well does it 'mate' with the back of the Pellet? Do you use a Pellet Sizer? Thanks for posting.

[@Docv400]

Thanks for the info. One more question (for now!), how is the Bolt sealed (to the Barrel) when closed? You didn't mention it in the video, where you opened out the end of the Barrel with the Drill Bit. Thanks again, John

[@cheesybunny321]

Hi I want to buy that that gun and I want to that gun

[@JoaoMSimoes]

Dear Sir, can you please tell us on average how many shots you can make with a Co2 charge on this weapon? Thank you very much.

[@JoaoMSimoes]

Many thanks for your response, I am now testing my CP1 - counting some shots;)

[@licensedtoburn]

João Simões I've had 106 shots from one co2 with my CP1 plinking at 6 yards, still accurate, still going strong, hope that helps...

[@JoaoMSimoes]

Nice ! I am also testing my !

[@johngriffiths3309]

Next pay day I’m investing in one

[@MrPlasma01]

mumbling mumbler b- strd at around 9-00

[@Wombat-blue]

Cant understand a Word you Say

[@reevessairgunningreviews5572]

Do you use a Hearing aid? It was very windy but most people can make out most of what I’m saying, or maybe English is not your first language. The video was made to show the grouping and performance of the CP2, so sound is really not super critical.

[@Wombat-blue]

@@reevessairgunningreviews5572 so you are not only a pathetic video producer but you are a patronising and insulting piece of shit also. Good to know!

[@reevessairgunningreviews5572]

@@Wombat-blue 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂

[@loojishtc9899]

So. If I keep the same configuration as you, but remove the rifle stock, I now have a highly illegal firearm? As in an air pistol which is significantly over the 6ft/lbs legal limit.

[@michaelnixson9099]

If it’s 21 inch it’s legal with or without the stock

[@stephanpoulsdelaford2991]

Mine is as smooth as Simon the silk worms smooth bits A1 100%