Something is Wrong with my Motor Now I'm Taking it Apart

[@raymondguzman1907]

No shop, no lift, no air power tools, nothing fancy just a man working on his hotrod outside, in a parkinglot for the love of it. This a real one. You dont see it done this way too much anymore. Respect for this man

[@ratherbeflying101]

YEAH, that's awesome, this young man got his shit together.

[@classicman5180]

@@raymondguzman1907 💯

[@alexgoldstein7997]

Nothing cooler than being able to say "I built this whole car outside with no lift and my own two hands"...Respect.

[@classicman5180]

@@alexgoldstein7997 💯🔥🔥

[@ItZFlipz]

that gangster shit

[@mr.g.d.i.y]

That’s a fact! Only way to be honestly!

[@JohnDoe-ef3wo]

fewer and fewer people can do this. 💪💪

[@classicman5180]

@ they got no love for it

[@alfredocarter5051]

I thank you for the motivation. I go under your beliefs Homie. You gotta be self-sufficient. I luv your content. Keep pushing Family

[@classicman5180]

@@alfredocarter5051 💯

[@rickeymathis2624]

This the part of it nobody shows definitely enjoy the content keep grinding.

[@classicman5180]

@@rickeymathis2624 💯

[@Mobilize]

That man said I ain’t editing a damn thang!! 😂

[@classicman5180]

@@Mobilize 💯

[@TruMotiveAutoMechaniX]

Old soul man really appreciate your content. I got my own shop and wish I was only working on older models this new sensor fuel injectors etc is terrible. Back then was straight carb fuel power and go.

[@classicman5180]

@@TruMotiveAutoMechaniX 💯

[@dougiebateson1971]

Man just pulled his entire motor right in front of our eyes .Get ur done out in the weather hell ya can't say he not a die hard with you lived alittle closer I'd have to ne friends with ya I could atleast let ya use garage in return u help me with my build .Congrats🎉🎉🎉 like to see people out there doing what they have to .See kids this man not out dealing drugs or thugging he building his own stuff learning as he goes just like I'm about to .Good job my man

[@classicman5180]

@@dougiebateson1971 💯

[@classicman5180]

Thanks man

[@billallen4793]

I don't even have anything broken down that I need help with, but I'd still let this kid use my shop, or a bay at my buddy's place! His attitude is everything!...from Wyoming USA 🇺🇸 👋🤠

[@classicman5180]

@ appreciate it

[@classicman5180]

@ 💯

[@призрак999]

I enjoyed this man. I built a mustang with my engineer friend and learned so much from him. This took me back after a stressful ass day. Grounded me right out and put me back there. It was cold as ice the winter of 2011 when we built it. One day the throttle stuck on me doing 100 but I miss those days very much. You obviously have serious skills. Really love the ride, and how it sounds when you open it up! Keep up the good work.

[@classicman5180]

@@призрак999 glad u enjoyed

[@angelo_giachetti]

It takes alot of power to spin that blower putting alot of side loading on the crank and pulley and that pulley is way out there creating alot of leverage on the mains. Consider that.

[@billallen4793]

Sucks to see your engine got hurt! Glad to see your positive attitude about it! Get well soon Mr Big Block!..lol..from Wyoming USA 🇺🇸 👋🤠

[@classicman5180]

@@billallen4793 I’ll be back in a month n half

[@billallen4793]

@classicman5180 I'll be waiting with anticipation! Are you gonna dyno the engine when you get it finished? Or just a refreshing, with the same parts inside. Same pistons and compression ratio plus a little cleaning up on the porting for intake runners, gasket matching, etc?? Don't forget the high zinc break-in oil for the first few oil changes! It cost me an engine once, because I didn't know that the oil had changed, it had been 20 years since I had rebuilt an engine at that point. The good news is it was just my wife's rotoriller engine, so it was a relatively inexpensive lesson, in comparison to a hot rod vehicle powerplant! I always get an accurate gold scale ⚖️ and balance my pistons and rod weights also...from Wyoming USA 🇺🇸 👋🤠

[@classicman5180]

@ new pistons and rings motor line honed crank polished heads ported a lil and then put together and hit the dyno

[@chrisgoffe5048]

..love the bonnet art looks great ..thanks for the upload from New Zealand

[@classicman5180]

@@chrisgoffe5048 💯

[@user-pwfus]

My brother you should tell the young fellows what you do for a living because you is a hard working man not a street hustler and it should be known, Keep up the hard work.

[@classicman5180]

@@user-pwfus most definitely a 9-5 man

[@EmpireDevelopmentGroup]

Even if he was a street guy I would respect him no matter what!

[@neilasd3043]

Why would you say that?

[@JohnDoe-sy2vb]

​@@neilasd3043 he didn't mean it negative,probably just talking about how the majority of young people always look up to what,or who,is popular which today is rappers ,and the image (most often fake) that they put off ,which is the streets ,the trap , robbing ,finessing and shooting ,even though they themselves never lived it ,and never do they glorify or talk about the pain and self destruction that comes with it , I'm a 90s baby , and did grow up in the street life , but I always knew where to draw the line , and at the same time also always worked hard ,was in the car game ,and also built my own cars ,but I can't honestly say that anyone else my age,in my area ,who was in the trenches had any work ethic , or hobbies other than self destruction

[@southernstyle8835]

Mad respect for this guy doing this in a parking lot

[@ikeepcontent]

Nice good sir . A power 3/8 socket wrench would help you a lot

[@9etherbo]

Love this content your showing the process of the breakdown and engine removal

[@classicman5180]

@@9etherbo 💯

[@SVHoyt]

I Agree, everyone has their own Eye for what design they want,. Skinny wheels, tall wheels, fat wheels. Its definitely not for anyone else to Judge what someone else should be riding in.. I Really appreciate this Art work he has, even tho my Camaro has wide tires on 15 x 10s .. If every body car looked the same it would be Horrible. I love this ART ~

[@classicman5180]

@@SVHoyt thank u

[@karlwahlfield6462]

that blower and pulleys are massive! i love how you make it look so easy, even with an episode of jerry springer going on in the background lol

[@classicman5180]

@@karlwahlfield6462 Jerry Jerry jerry

[@pedub2222]

I wish you had some fender covers, great video

[@NicholasCampbell-c8y]

That car is soo slick. Thanks for showing us the dirty work!!

[@classicman5180]

@@NicholasCampbell-c8y no problem

[@SprillaWhite-vw7di]

No power tools I salute 🎫🔥🔥keep it up u getting better every time

[@classicman5180]

@@SprillaWhite-vw7di thanks

[@mattkonetski9818]

I like your carpet for the underneath work, but a big, opened cardboard box works good too. You can slide on it.

[@classicman5180]

@@mattkonetski9818 facts

[@LSX_GORILLA]

Carpet under the cardboard for comfort ya dig

[@pethogriggs4990]

I love this content the good and bad keep em coming big homie and nice ride

[@classicman5180]

@@pethogriggs4990 💯

[@coreyturner1896]

Can’t wait to see you back out here Bra!! enjoying the contact

[@classicman5180]

@@coreyturner1896 💯

[@Godsbest777]

Classic!!! That lady got the spirit of Ike Turner and Mike Tyson. How did you stay focused? 🤣😂😂

[@classicman5180]

@@Godsbest777 😂😂😂

[@jerryrivera7704]

In the house it's different 😂😂

[@Godsbest777]

@@jerryrivera7704 😂😂😂

[@damongrimes6679]

The fact that it's a whole fight goin on in the background at the 2 hour mark is priceless 😂😂. Bro is jus like 🤷🏽‍♂️ let me keep working 😂😂. Great content 💯💪🏽

[@classicman5180]

@@damongrimes6679 😂😂😂

[@evilke-kneebone]

Built not bought...You get ALL the RESPECT!

[@WendysAnime]

Love it, so many people clown on cars for looking like this, But the amount of work and skill to achieve such a look is nothing short of art.

[@classicman5180]

@@WendysAnime 💯

[@MyRealDelusion]

that makes it even worse

[@King_Danny81]

That lady goin off🤣🤣🤣🤣🤣🤣🤣

[@BillKeel-cd6tn]

In h😅i 😊i😊i😊ijijij😊i😊i😊😊😊i😊i😊😊ijijijijijijijijjjijijijijijijijijojojoj😊iojijij😊ij😊😊😊😊j😊😊n

[@Godsbest777]

Bruh she had so many raw statements I couldnt believe🤣😂😂 Woman harder than Niccas these days. She been listening to a lot of rap literature

[@skuuuwooop]

This is real car shit! Love it my man. Keep up the hard work.

[@joshualandojeanotte4567]

Sup from North Dakota started watching this week dudes funny n cool to watch 👊🏾😎

[@classicman5180]

@@joshualandojeanotte4567 appreciate

[@Jonathan-ik9gh]

Even though engine was messing up that is still a cool hotrod. Thanks for showing it off nice ride.

[@peggysmith8467]

Fort Pierce Florida here, great stuff bro God bless.

[@classicman5180]

@@peggysmith8467 💯

[@Detroitmuscle74]

Great video showing the process.

[@classicman5180]

@@Detroitmuscle74 thsnks

[@corriebordeaux5598]

Inspiration gang 💪🏾 shoutout to y’all Florida boys … love from the Carolina’s

[@classicman5180]

@@corriebordeaux5598 💯yooo all love

[@tevingay8030]

And here i am crying about taking this 91 honda motor out......blessings man. I appreciate the inspiration.

[@classicman5180]

@@tevingay8030 line ur car up

[@tyrekalston3471]

I watched this whole video while I was at work yesterday, I do most of my work to my caprice by myself as well due to some haters not wanting help or gotta move on somebody else time. Keep the videos coming 🔥🔥im watching dawg

[@classicman5180]

@@tyrekalston3471 that’s love 💯

[@JuanLopez-y4w7u]

Nice car looking like a fun build. I'm currently working on my first build my self just put the motor in last night. Now like you said us fuel injection guys. I have to do the wiring aspects. Keep up the good work . # BIG BLOCK #BUILDYOUROWN #DYI!!!

[@classicman5180]

@@JuanLopez-y4w7u 💯💯

[@MarkSmith-vb7ym]

I think too much compression with that blower on their supercharger You should be running flat tops about eight point five to one compression . I keep up the great work I sure love that blue paint That's a pretty color

[@joerairden2634]

I'm 'bout to fall asleep. Best show yet. Please keep them coming. AMSR. For real! Wrench Life!

[@classicman5180]

@@joerairden2634 lol don’t fall asleep on me

[@tombrenes2411]

F words and N word will not get u KZbin $$ You got good content you need a editor Your ride and dedication is good enough to make it on KZbin Keep busting knuckles Get out the madness

[@classicman5180]

@@tombrenes2411 that has nothing to do with me in the background

[@ThomasJackson-f4h]

Trust me my brotha it's in the bottom end. Much success in finding the issue. Overall it's a very nice whip 👍

[@classicman5180]

@@ThomasJackson-f4h piston

[@residentialremodelers7413]

Your oil pump might’ve broke off because you didn’t use a torque wrench. I highly suggest getting a torque wrench in finding out the specs on all the bolts for that engine.. or go with general spec for that part some parts require lock tite but seriously get a torque wrench……!!!!!!….

[@MrD78cuttdog]

Must respect a real tear down on a motor wit no skips Ill take a small block 350 original befor a ls just my opinion

[@classicman5180]

@@MrD78cuttdog facts

[@micaiahstice4444]

Man you have so much talent! Any team would be crazy not to have you as a part of the team! Good luck with future endeavors my friend ok

[@classicman5180]

@@micaiahstice4444 💯🔥

[@billallen4793]

Might as well do some porting on the head's and intake whilst you've got it apart!...from Wyoming USA 🇺🇸 👋🤠

[@classicman5180]

I am

[@2muchBoost_]

I would recommend to look into Alkycontrol methanol injection system...i run them on both of my cars it helps with detonation when running a lot of boost on 93 pump gas...It only spray when it hit a certain boost...Good content

[@classicman5180]

@@2muchBoost_ that’s wat I have but mines is snow performance methanol injection

[@classicman5180]

@@2muchBoost_ hit me up I got a couple ?s

[@2muchBoost_]

@ how can i get in touch?

[@classicman5180]

@ it classicman954

[@keyth38]

Nice... try to go to a drysump oiling system, big blocks know for spinning bearings 👍🏾👍🏾👍🏾

[@mikecrawford5331]

Hope everything works out on the engine!

[@classicman5180]

@@mikecrawford5331 💯

[@19novA68]

Yes sir that's what I'm talking bout..DIY 💪😎👍🏁

[@classicman5180]

💯

[@dougiebateson1971]

Hey i give you props turning ur own wrenches not out there slinging dope .I just bought a speedmaster 6-71 blower for my sbc i like to watch ur vidoes hoping to learn what to do what not .Big Tire A Thang down there 541 Oregon Here 92 s10 build thnks bro for the knowledge

[@classicman5180]

@@dougiebateson1971 I got plenty knowledge for blower builds

[@EdwinValdivian]

Man, soon enough I’m gonna get me that 71 Plymouth Rd. Runner 440

[@twotwocold]

My only argument is that rtv silicone stop using it!! It's way better products out that won't make It's way inside the engine to destroy it👍🏽

[@chrisg18999]

Hey man car looks great 👍🏼 I would say even when taking the blower off or intake off you should still follow the torque or bolt down sequence so you don’t warp your manifold or break bolts

[@classicman5180]

@@chrisg18999 great advice

[@SVHoyt]

Im Jealous of that Blower engine haha IM surprised how fast you got it off. Kudos to camera man too

[@CecilDaRuler]

The fact, my boy did everything himself I salute him🫡

[@classicman5180]

@@CecilDaRuler 💯

[@Meech_C10]

Man said Ya she bark but she bite when she needs to💯 Let em hate man🤝🏽

[@classicman5180]

@@Meech_C10 💯

[@MaliktheGeek316]

I would atleast let the machine shop do bottom end with better bearing for better bearing lubrication . then i would upgrade oil pump and do holley fuel pump kit that way the motor stays happy. Might as well check ignition system and fuel pressure regular too. Just in case .

[@Visons_Lysergic]

loctite my guy 😂

[@reeupshawty4615]

going hard salute!!!!! one man army!!!

[@classicman5180]

@reeupshawty4615 yooooo💯

[@mzimm460]

Good job I’m glad someone got some talent. It shot rite past me

[@corybrown8296]

Makes it look easy.. thanks

[@dlong2xx]

Definitely love the content bro, big salute from SC 💪🏾

[@taefully]

Yessir bra getting better in better keep going loving the content gang

[@classicman5180]

@@taefully 💯💯

[@RoastBeef1968]

Teflon is used as a lubricant for the rotors. Street blowers utilize these whereas drag racing blowers do not

[@thereflectionartist]

Humble Dude 100

[@shamauto7332]

Women in the back ground giving someone the business.. She called someone Shitty😂😂😂. Keep doing your thing my G.

[@f.chrisliuzzo7889]

What kinda compression are ya running in that big block? 8!? Nitrous and charged is no joke!! Nice ass build. Makes me miss my first 85 Monte sport coup😢.. happy there’s others building stuff like this. I hear ya about those oil pickup tubes..

[@classicman5180]

@@f.chrisliuzzo7889 static 9:5:1

[@MommasGoldenChild_loc0364]

Minor set back for mayor come back💯

[@classicman5180]

@@MommasGoldenChild_loc0364 💯

[@adamthomas4638]

He's determined but I hope he cleans everything real good before installing it back cause he laying the parts on the ground

[@JoshPerez-b5k]

That right foot hurt it🫡keep up the good work

[@classicman5180]

@@JoshPerez-b5k lol

[@SavageWhiteBread]

That's generally what happens when you build em strong... They're not made to last long...

[@PmoneySkates]

I got to admit it looks sweet without the hood 😁

[@classicman5180]

@@PmoneySkates thanks

[@vincegedeon6583]

That motor looks menacing😈

[@classicman5180]

@@vincegedeon6583 thanks

[@soni727]

Sir how much did the whole project cost? And how much time did it take for you to build it and do even worry about cleaning up the wires it looks fantastic!!

[@classicman5180]

@@soni727 well it was trial and error wen I first started playin with blowers but I got it down pack no time but out of pocket I. Put over 30k that’s with machine work and etc

[@soni727]

Looks and sounds great! So fast off the line it’s just crazy! I bet you beat a Motorcycle off the line.

[@classicman5180]

@ facts

[@Dramaa88]

Badass!!! This is awesome!!

[@classicman5180]

@@Dramaa88 💯

[@JosuaMc24]

this videos to go to sleep are great bro nice car

[@chrisnew2752]

Working on his ride and 1st 48 in the background lollollollol

[@classicman5180]

@@chrisnew2752 😂😂😂

[@residentialremodelers7413]

You should get the torque spec for the blower to the motor bolts

[@chris47374]

Should have left the lifters n the heads all 2gther if the problem n the bottom end saved u some time n hassle.

[@djhandy45555]

People still thinking big rim cars wont spank they ass on rims

[@classicman5180]

@@djhandy45555 facts

[@Berg-Nasty]

Are you not able to drop your oil pan and check to see if you spun a bearing before testing her all down?

[@classicman5180]

@@Berg-Nasty no sir

[@Berg-Nasty]

@classicman5180 ah ok, i wasnt sure. Did you ever find out why you lost oil pressure? You definitely need to do a build video.

[@classicman5180]

@ will do

[@earlytaylor]

Not the first power tool in sight holy hell Edit : I just seen the dewalt drill but that’s it 🤣

[@classicman5180]

@@earlytaylor lol

[@earlytaylor]

@@classicman5180 still got it pulled in 2 hours not like you needed them anyways. Car looks so good I like the engine bay pan around the motor a lot keeps water from being splashed up from rims and hides everything! Dope ass car I wanna creep down Main Street in that bitch

[@classicman5180]

@ when I rebuild engine cm get it

[@earlytaylor]

@@classicman5180 what you want for it

[@earlytaylor]

@@classicman5180 where you located

[@luciocastro2973]

🔥🔥🔥👏Fya my boi!

[@classicman5180]

@@luciocastro2973 💯

[@lengthluther484]

They make these really cool shallow pivot sockets for really odd spots. I had to buy one to remove an oil pump in a 2105 dodge journey.

[@smashergrilla954]

Need 2 paint that joint black great job tho

[@rvmonkey1669]

I’m wondering if you get the carbs jetted to run on E85 if you’d be better off as far as detonation is concerned?

[@classicman5180]

@@rvmonkey1669 I ran e85 with my fi tech dumpster it just burn to fast

[@rvmonkey1669]

A buddy of mine used to run AV gas it is 100 octane aviation fuel a lot cheaper than race. Gas smells good too. You do have to jet accordingly. It is a slower and hotter. Burning fuel and it’s leaded.

[@joerairden2634]

I wish I had this lifestyle😂🎉 As I sit here with a gen 3 LS vortech 😂

[@classicman5180]

@@joerairden2634 😂😂

[@larretta88]

😮I had to subscribe after watching you tear that motor down with ease..

[@classicman5180]

@@larretta88 thanks

[@danielmills686]

@laretta88 Haha me too, dude has sum skills id love to have someone like this dude workin in my bay w me fr

[@classicman5180]

@ 💯

[@yaboyroi7897]

I clicked on this to fall asleep to😂😂 16:18

[@croomsracingengines9265]

Get you a crank support bracket

[@biggiebruce72]

Like the video. Keep the video short and break it up into multiple will help to start making money.

[@rudybranch8171]

Love the video bruh , Monte Carlo is on my fav cars . Question how you keep up with your bolts lol

[@classicman5180]

@@rudybranch8171 I guess if u know u know type thing

[@NoName-qs6ei]

When you take it apart, go slow. Don't just thrash and hurry to get it out. Do it this way and it goes back together faster and you will know how things go back together. Put bolts in bags and mark it. Like intake bolts, etc...

[@billallen4793]

I ise a piece of cardboard and put the bolt in it's position in the cardboard! Then bag and tag everything else!...from Wyoming USA 🇺🇸 👋🤠

[@RoastBeef1968]

What brand and size blower?

[@classicman5180]

@@RoastBeef1968 bds 10-71

[@19novA68]

That woman in the background with all them words .. I'm lmao😂#SHENOTPLAYING

[@classicman5180]

Smokers arguing

[@boszdon]

Real grind i respect it my boi SALUTE everybody build made to be different

[@residentialremodelers7413]

You should put some bracing under the hood, you Could get all that buckle out if you’re strategic about it..

[@Mr.Frost181]

Hp1127 is crazy horsepower 😮

[@IamVintage72]

Nice ride😊

[@classicman5180]

@@IamVintage72 thanks

[@lengthluther484]

There’s too many shady shops around now a days. This is a show car damn near you don’t want no one else touching it but yourself!!! Then you know for sure things got done and done right!!

[@RoastBeef1968]

Whats your overdrive? Whats you psi boost?

[@classicman5180]

@@RoastBeef1968 12% 15 lbs