Sony A7S III Firmware Update 3.0 (Mac Install Problem Fixed)

[@PhillipSkraba]

UPDATE: Whilst testing this evening, I am having a couple of problems. The A7S III seems to now and then be freezing up, and won't turn off until I pull the battery out.

[@StaticJaFilms]

I've seen a few reports that 3rd party batteries can lead to operation issues and also the camera will run much hotter on this OS by default. I hope its a battery issue, please check the the high temp option and make sure its on

[@SmashyMcGee]

Thanks for letting us know! I might wait for a patch before rushing to update.

[@PhillipSkraba]

I was using my original Sony battery. High temp was on.

[@PhillipSkraba]

Yes, might be better just in case.

[@StaticJaFilms]

@@PhillipSkraba oh man I was hoping that's the fix, I've done a 3 hour feature in the morning and a quick insta car reel just now in the scorching hot sun in Jamaica and so far so good. I hope its nothing a system initialize can't fix. Try that option

[@StaticJaFilms]

I'm sure the 24fps is limited only to the 4K DCI. You can change your shutter to 48 but all other modes still record in 23.9 etc.

[@PhillipSkraba]

Yes, I think that'c correct.

[@StaticJaFilms]

@@PhillipSkraba also maybe bcz of my region which is Jamaica but I didnt get the DCI option after download and had to follow the instructions to get the licence using the camera serial number then it became available. Anyway great video, I was fortunate to know about the security feature for M1 Macs prior

[@zombiepictures]

@@StaticJaFilms the dci capability has to upgrade via creator app... that incredible but I guess that open a new gate to more pay upgrades.

[@StaticJaFilms]

@@zombiepictures oh I should have mentioned that the creator app doesn't work in Jamaica so we can't download it, thankfully you can get the license from the website.

[@Bo_Hazem]

Man you were too excited you typed AS7 III on the thumbnail.😁Also we have shutter lens protection "closes down when turned off" under the "Anti-dust function". Most people don't know it. I tried it and it's a massive plus to me when filming in the wild in humid, dusty, raining weather!

[@PhillipSkraba]

Lol!! That was a mix of excitement and wanting to get home to my kids after pissing about all day with this update as my Mac wouldn't allow me to update 😂 Damn, I'll have to test that out tonight when the rascals go to sleep, thanks!

[@PedroHofmann]

you saved me - this was SOOOO helpful. Got stressed with my MBP M1 because of that Security issue. Now updating to 3.02 - we will see if the battery bars are back 🤔

[@Dan_Duffin]

I'm gonna hang back on this update. I was kind of hoping for User Luts and potentially Shutter Angle. I can continue to live without any of the other new stuff until I'm sure this update is solid or recalled/reissued.

[@PhillipSkraba]

I don't think they want to bring that to a hybrid camera, it's not a cine line, so they're refusing I think. The update is good, but FULL of bugs at the moment.

[@Dan_Duffin]

@@PhillipSkraba It's a shame though, as those two features would really complete the A7SIII. I don't really want the FX3 as I hate the pure touch screen menus and no EVF. The A7SIII has been an amazing night concert photography camera paired with the 135GM. Once its stable I will install and catch up. For now, I'll keep rolling.

[@MrCezaryo]

Thank you brother for this video! Had also problems with Installation on Mac 😢 Now is everything fine! Thanks again! ❤

[@7i_adam616]

After v3.00 update for sony a7iv have the option to purchase custom gridlines. But how are custom gridlines installed and imported into c1-c4 (Png files) create them? Purchase/download? Is there a tutorial on how to do this because i cant find any method/instructions of/about installing custom gridlines. I feel custom gridlines will help with framing and work flow for certain social media apps, like 4:5 5:4 and 9:16 16:9 while remaining in the full sensor 3:2 resolution Great content, love your work, very informative, dont stop !!!

[@PhillipSkraba]

For $149 it’s such an odd choice by Sony. This all should be free. Thanks, doing what I can 🔥

[@prepromedia7000]

I'm having this issue with my PC. The camera gets to the "Automatically Reset the Camera" portion, then connects and disconnects to the computer a few times, then simply shuts off. The system updated asks to 1. verify the camera and computer are connected (the are), 2. hit "reset camera" on the camera's screen (screen is black), and 3. hit the next button when verified. None of this works because the camera gets powered down. Like you said, there is ZERO help out there from Sony. Can't see any Sony driver for a PC out there, either.

[@keyismedia]

I got the same issue

[@rickevertsz]

On M2 MB Pro here. The update instructions said to put it in Recovery Mode. I didn't bother; just in case. All worked fine for me. Not sure why. Painless process this time!

[@PhillipSkraba]

Good to hear that, I had a hell of an afternoon with this lol.

[@ByBlissakai]

Any suggestions for iMac? The holding down the power doesn’t give you the security prompts

[@DominikPacholczyk]

chwilę wcześniej robiłem aktualizację kompa a chwilę później zabrałem się za aktualizację S-ki i dokładnie taki problem się pojawił 😎 dziękuję Filip za wyjaśnienie… ale proszę dodaj tylko czy po aktualizacji sprzętu w macku muszę cofać tą procedurę czy zostawić i można spać spokojnie 😅??

[@PhillipSkraba]

Nie trzeba cofac, nie. Ja sobie tak zostawilem bo czesto instaluje jakis program.

[@vladimirchapranov]

If I do not like the result of update and I run Camera Settings Reset will I get the firmware I had before I ran Firmware Update?

[@elliottmccrackenrealestate2907]

Hey bro, thank you a lot for this video. THe problem is I can't find the 2.11 to 2.15 download on the sony site anymore. Do you still have that by chance?

[@PhillipSkraba]

It’ll be in the 3.0 folder, they’re sneaky like that.

[@Brice_Butler]

I can't find the firmware 2.15 on the sony webpage. Any help? i got my a7iv dialed in today but the a7siii 2.15 can't be found

[@PhillipSkraba]

It's funny, it's in the actual 3.0 update folder, I was looking for it too.

[@dronefpv]

Eye's tracking is not working as well as the prevuious firmware. The target in the eye goes somtime out of focus with no reason...

[@PhillipSkraba]

Yes, same on mine.

[@LeeChaiHee]

thank you very much you save world time!

[@PhillipSkraba]

You're welcome!

[@kamilzag5948]

Great job bro !Many thanks from Poland!

[@PhillipSkraba]

Thanks! All the best from Lodz 🛶

[@OrlanDave]

I keep getting an error "You need to install Sony Camera Driver. Sony Camera Driverをインストールする必要があります。" I apparently am also behind of firmware as I'm using 2.01, I wasn't aware there had been updates previously.

[@keepit3containerrentals788]

You have to download the Sony Camera Driver and install it onto your computer before you’re able to update the camera itself

[@kamilzag5948]

Walczę z podpięciem USB po tej aktualizacji by mieć jako WEBCam (bo tu zmiana app) - udało się może Tobie Filipie?

[@PhillipSkraba]

Ja ma caly czas problemy po tej aktualizacji, strasznie frustrujaca jest.

[@danieljoesch]

Did not help! After allowing the App 2.1.5 by password, the App quits.

[@KevinBurton]

I don't understand the confusion around this. Sony's firmware page lays out all the steps with the security settings on Apple silicon hardware. Patience and reading EVERY step will get everyone through this.

[@PhillipSkraba]

It actually didn’t, no. It takes you to a point, but it doesn’t tell you that you need to go into recovery mode. I never had that problem before.

[@ScoobieDee]

Thanks for this . I am gonna wait till the battery thing is sorted that a major issue !! Lots of great upgrades otherwise !!

[@PhillipSkraba]

I’m guessing Sony will be dropping a fix soon.

[@timelapsega]

Anyone else burning through batteries after this update? I'm using all OEM Sony batteries and they seem to be draining 2-3x faster than prior to update.

[@THELINK972]

The system software updater still closes after I put in my password. And the privacy setting is already on app store and identified developers. What am I doing wrong?

[@PhillipSkraba]

Did you install 2.15 first?

[@SaurabhShukla_22]

hey, are there any plans of getting that update on Sony A7C?

[@PhillipSkraba]

That I have no idea about, but I doubt it.

[@cc7cc10]

Hello there, where did you get the 2.15 firmware update, I can't find it. Thank you much

[@PhillipSkraba]

It’s in the 3.0 folder

[@HwayVision]

Why is every creator just bypassing the timecode support. That's huge that's it just an update away from being supported. So far the only camera with timecode support was fx series. I get it yall don't use it but for us using multicam this is nice

[@PhillipSkraba]

Well, I think a very small percentage of creators use timecode, I'm guessing not even 1%. I do agree though, it's great to have in the update!

[@greggsmith3964]

ALL OF MY BATTERIES, INCLUDING OFFICIAL SONY Z BATTS, NOW HAVE THE UNABLE TO GUARANTEE SAFE OPERATION WARNING ! I had no issues with the a7siii v 3.0 firmware update on my M1 Macbook Pro, although I did have to update to interim 2.15 update before doing 3.0. However, I was unable to find the DCI 4K 24.00 fps until I realised you have to apply for a license for it using the Creators app. Unnecessarily complicated and I'm hoping an update comes to sort the battery issue soon.

[@PhillipSkraba]

The official ones too?!!! Okay, I need to try all my official ones, maybe the older ones are not up to date. I agree, hopefully a fix will come soon as mine froze this morning about 3 times again.

[@Monik74nina]

Good , I updated my Sony A1 to firmware 2.0 and it gave me a lot of problems. I just updated to the new version 2.1 and the problems are still the same. Do you have a solution? One of the main ones is that I don't have a connection to the mobile and I can't use anything from creators. Thank you.

[@PhillipSkraba]

Yes, my A7S3 is a bit melodramatic now after the update.

[@RosarioSidoti]

I followed all your steps only after I launch the app it closes after I enter the administrator password

[@PhillipSkraba]

Did you allow the app to open via the privacy settings?

[@imadclicks]

Guys my wifi and bluetooth have a malfunction and doesn't work after the update. Does anyone have the same issue .. any fix plz help 🙏

[@PhillipSkraba]

Mine work, I've connected to both apps and no problems with that. I only have problems with the camera freezing.

[@UmarFarooq-ti2bw]

Hi sir, I hope you're doing well. I need your help. My A7SIII suddenly stopped working while I was using it, and the red light is blinking. Even when I turn the camera off, it persists. Can you please help me identify what might be causing this issue? Thanks.

[@rickevertsz]

Take battery out for a bit?

[@PhillipSkraba]

I'm having a couple of problems myself, take the battery out and let it chill.

[@UmarFarooq-ti2bw]

I've also tried changing the battery and the charging light isn't turning on when connected with a cable.​@@PhillipSkraba

[@maheshgvelly]

After the update, I lost Bluetooth functionality and the viewfinder’s view. Can you please lemme know how to fix it

[@PhillipSkraba]

To be honest I have no idea, all the settings do go back to ZERO, all my settings work, however the camera does freeze a LOT.

[@LoryBenz]

did you manage to correct the bluetooth problem?

[@maheshgvelly]

@@LoryBenz nope am still looking for solutions, this is the buggiest firmware ever

[@kamilzag5948]

A tak Mi się wydawało, że to jakoś polsko brzmiące nazwisko hehe , to czego kanał w Eng?

[@PhillipSkraba]

Ja sie urodzilem w Londynie, tam mieszkalem, i dopiero sie przyprowadzilem do Lodzi jak mialem 23 lata. Wiec po prostu naturalniej mi po Angielsku, i do tego mam wieksze zasiegu po Angielsku 🤘🏻

[@KooroshAcademy]

I have an important question. Before the new update, when I changed the AF from the lens to the MF ( mode in the video mode ), "PEAK" appeared with the red color that I had previously determined, and again when I changed the focus from the lens to the AF mode, "PEAK" was turned off . But after the update, when I turn on "PEAK" and put the lens in automatic mode, "PEAK" remains and Don't be off . where is the problem from ?

[@PhillipSkraba]

That is odd. My peak is set to off unless I turn it on via a custom button. I have noticed some things have changed for me too. Getting to RAW photos had my head scratching lol.

[@KooroshAcademy]

So I can't solve this problem ?@@PhillipSkraba

[@PhillipSkraba]

@KooroshAcademy well, I don’t seem to have it, and it seems a lot of us have different problems, which is odd. Maybe re-install?

[@KooroshAcademy]

Re-install or waiting for new update ?@@PhillipSkraba

[@docgooner7]

I know exactly what you’re talking about. I haven’t updated but I have a7s3 and A7iv. The A7iv has peaking in for both but a7s3 doesn’t it so frustrating. The peaking being on or off depending on AF or MF being trigger is such a good indicator to which one your currently using

[@maciej1975]

just a question, which probabbly has been asked many times......U have polish surename, U live in Poland , so I suppose u are Polish.....ur english is perfect, I am just curious-- is one of ur parents anglo-speaker, or u were born in uk or in states and spent most of ur life in there? cheers

[@PhillipSkraba]

I do get it a lot, yes. I was born in London, lived there for 23 years. My parents are Polish, I’ve lived in Lodz, Poland 20 years now, so that’s basically my story when it comes to my English 🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@videolaricin8634]

you get my sub! thx for this video men!

[@PhillipSkraba]

Thanks for the sub!

[@WexlerProductions7]

hey guys! im getting now a bluetooth and wifi function has malfunctioned message after updating!!! So cant connect to the app at all...

[@PhillipSkraba]

Yes, a lot of people are mentioning this, let's hope Sony drops a fix soon.

[@LoryBenz]

did you manage to correct the bluetooth problem?

[@WexlerProductions7]

@@LoryBenz spoke to Sony...they said they'll have to release a further update to fix the issue.

[@iambrandonscales]

Thank you for this!

[@PhillipSkraba]

You’re welcome!

[@rafhaelhaddad]

Does anyone know anything about some new update coming for the a7iv?

[@PhillipSkraba]

Not me

[@rafhaelhaddad]

@@PhillipSkraba actualy yesterday..lolol sony has released the 3.0 update.. that changes anything, again.. big changes for a7 siii, none to a7iv.

[@thereelmccoy1440]

God bless you!

[@PhillipSkraba]

Thank You, all the best to you too!

[@unsinverwenza]

Finally!

[@PhillipSkraba]

It's so good to finally have this!!

[@AVdigitalPRODUCTIONZ]

Nice one…thanks.

[@PhillipSkraba]

Anytime, thanks!

[@BeTheRamMedia]

Thank you my brother

[@PhillipSkraba]

Glad to help!

[@BeTheRamMedia]

@@PhillipSkraba stayed on this for about 4hrs and gave up. Still won’t work for me

[@PhillipSkraba]

@@BeTheRamMedia Really? The update itself?

[@BeTheRamMedia]

@@PhillipSkraba I can get it to load up to even install. I tried parallels but camera is never recognized by MacBook

[@PhillipSkraba]

That is odd, I'd leave it for now, it's full of bugs.

[@LoryBenz]

For me problem wifi/bluetooth whit the new firmware

[@PhillipSkraba]

Yes, I've heard that from a few people now. Mine is okay, it just freezes a lot!

[@LoryBenz]

Mine no freeze , just the problem wifi/bluetooth

[@techr9186]

it's buggy, unstable and you can't roll it back

[@Oli-vver]

This trick doesn't work with mac M2....

[@PhillipSkraba]

Sure it does, this was on the M2.

[@Oli-vver]

@@PhillipSkraba I did everything you said, but it doesnt work with M2 sonoma...(update of a7r 1) I'm trying but it doesnt want to do anything :(

[@charlestownsendfilms]

Crap still don't work. I switched to Sony from Panasonic and this makes me want to switch back.

[@PhillipSkraba]

Frustrating huh

[@steveandnaz]

Pity it didn't include animal-bird eye detect!

[@PhillipSkraba]

I'm guessing it's something Sony is working on.

[@TommyMacTube]

He said filming 25 fps like normal people🤣 normal people don’t make cinematic great movies like USA 🤘🏼😎 Read and weep🤣🤣

[@PhillipSkraba]

Lol, living in your own little bubble huh? Never seen a foreign movie?

[@TommyMacTube]

@@PhillipSkraba I use subtitles for the asian ones lol. I prefer the 24fps because of that beautiful cinematic blur is so nice

[@PhillipSkraba]

Yeah, it's the same in 25fps, which we have to use due to our hz. 24 and 25 are for the film industry, 30 is for television and social media, 60 and 120 are for slow mo. That's basically how it looks.