Sovol SV06 ACE Guide: Best Printer Under $300 ? Unboxing, Setup, Slicer, Prints, and More!

[@EmbraceMaking]

If you guys enjoyed this video, please consider supporting my work by checking out the links below! Get the SV06 ACE at the best possible price: ► shareasale.com/r.cfm?b=2559435&u=3650799&m=131011&urllink=&afftrack= ► www.sovol3d.com/?ref=EMBRACEMAKINGSV06ACE Looking for the Sovol core XY cube frame monster? Best price on the SV08 here: ► shareasale.com/r.cfm?b=2559397&u=3650799&m=131011&urllink=&afftrack= Need the universal spool stand for your SV06 ACE or another application? You can find it here: ► embracemaking.com/products/universal-top-mount-spool-stand A few other cool tools and things for 3D printer enthusiasts. (As an Amazon associate I may earn a small commission at NO extra cost to you) Sunlu Matte Blue PLA (as seen in the video): ► amzn.to/3ZhlVYB Polymaker PolyTerra PLA (One of my favorite filaments): ► amzn.to/3sdhK1x eSUN PLA+ (Another one of my favorite filaments): ► amzn.to/3QA4tuq Electric Screwdriver: ► amzn.to/3JRbbZe Rechargeable Batteries: ► amzn.to/3W6dAoK LED Bars for your work space: ► amzn.to/3Cuk3CD

[@leskopeter68]

Very good presentation. Please could you share the spool holder stl?

[@andewpippin5058]

here is a question. I've been searching for a way to change the zero on the Y axis on mine, but I cannot locate anything on the screen. is this Gcode fix?

[@EmbraceMaking]

Just to be clear you want to change where on the print bed the y=0 position is? Not the physical end stop position, correct? If it is just the software y=0 then you should be able to go into the printer.cfg file in Klipper and apply a y offset I think. I can look into that.

[@andewpippin5058]

@ when i do the print to start. The orca slicer says the print is centered. When it starts to lay layers. Its off centered on the physical build plate.

[@EmbraceMaking]

Is it off a little bit or a lot? When I first got the machine I didn't remove the piece of foam wedged under the print bed at the back so it was hitting the end stop early and messing up my y axis. Otherwise if the print is centered in Orca it should be centered on the bed.

[@andewpippin5058]

@ 🤣🤣🤣 that was it. Little foamy guy stuck in.

[@EmbraceMaking]

Yeah I mention it in the video above, I missed it too and it screwed me up for a whole day 😭 lol