Spa jets not working

The video discusses how to fix a swimming pool hot tub where some of the jets are not producing any water pressure. The steps outlined are:
1. Drain the hot tub.
2. Remove the flat jet covers, which can be difficult to get out. The video demonstrates using a tool to grip the sides and twist the jet cover out.
3. Once the jet cover is removed, pull out the nozzle inside, which is clogged with debris like rocks from the pool filter.
4. Clean out the clogged nozzle to clear the blockage.
5. Reassemble the jet by putting the clean nozzle back in and replacing the jet cover.
6. Repeat the process for any other jets that are not working properly.
The main issue was clogged nozzles preventing water flow through some of the jets. Removing and cleaning the nozzles resolved the problem.

[@DanOverstreet-e6n]

I had been struggling with this issue for quite a while. Back washed, used blowers and nothing worked. Finally I watched you video and it worked perfectly. Four of my six jets were clogged with debris. It took a little time and effort but worked like a charm I would never have known to get the socket inside the jet. Thanks for your video.

[@Pool-guy]

Heck ya! Glad to help. Hope you have a great holiday season.

[@D1337ification]

Is there a standard size for the socket?

[@Pool-guy]

This one was 1/2” I have also seen 9/16