New Milwaukee Carbide Hole Dozer Hole Saw Bits for Multi-Materials

Milwaukee Tools 12 PC HOLE DOZER with Carbide Teeth Hole Saw Kit
49-22-3090: Acme Tools: acmetools.pxf.io/xkrBQk
Milwaukee HOLE DOZER™ with Carbide Teeth Electrcian's Hole Saw Kit 10pc 49-22-3084:Acme Tools: acmetools.pxf.io/jrQPZn
Milwaukee M18 FUEL 1/4" Hex Impact Driver Kit
Item No.2953-22: Acme Tools: acmetools.pxf.io/xkrBQO
Milwaukee M18 FUEL 1/4" Hex Impact Driver
Item No.2953-20: Acme Tools: acmetools.pxf.io/AWnr2D
Milwaukee M18 FUEL 2 Tool Combo Kit
Item No.3697-22: Acme Tools: acmetools.pxf.io/9gnN2Y
Milwaukee M12 FUEL 1/2" Hammer Drill/Driver Kit
Item No.3404-22: Acme Tools: acmetools.pxf.io/oq5A0Y
Milwaukee M12 FUEL 1/2" Drill/Driver Bare tool
Item No.3403-20: Acme Tools: acmetools.pxf.io/k095Vx
Milwaukee M12 FUEL 1/4" Hex Impact Driver
Item No.3453-20: Acme Tools: imp.i284638.net/vnJqaj
Milwaukee M12 FUEL 1/4" Hex Impact Driver Kit
3453-22: Acme Tools: acmetools.pxf.io/VmAngJ
Milwaukee M12 FUEL 2 Tool Combo Kit
3497-22: Acme Tools: acmetools.pxf.io/g1q9Jv
Milwaukee M18 FUEL 2 Tool Combo Kit
3697-22: Acme Tools: acmetools.pxf.io/0ZybnY
Milwaukee Tools 1 In. x 6 In. Ship Auger Bit
Item No.48-13-1003: imp.i284638.net/vnJqdj
Milwaukee Tools 7 pc. Big Hawg™ with Carbide Teeth Kit
Item No.49-56-9280: Acme Tools: imp.i284638.net/7mvkgQ
Milwaukee Tools
10 pc. Big Hawg™ with Carbide Teeth Kit
Item No.49-56-9290: Acme Tools: imp.i284638.net/YgM6AP
Milwaukee Tools
2-9/16 in. SwitchBlade™ Replacement Blade 3PK
Item No.48-25-5550: Acme Tools: imp.i284638.net/LPMVLM
Milwaukee Tools SHOCKWAVE™ 75-Piece Impact Drill and Drive Set
Item No.48-32-4030: Acme Tools: imp.i284638.net/P0MNGQ
FREE MILWAUKEE M18 FUEL 10" POLE SAW WITH M18 FUEL 16" CHAINSAW KIT PURCHASE at Acme Tools until 10/21/2022: imp.i284638.net/c/2377215/145...
FREE MILWAUKEE BARE TOOL WITH 48-11-2412 M12 XC3.0 BATTERY 2PK PURCHASE until 10/30/2022 at Acme Tools: imp.i284638.net/c/2377215/144...
FREE MILWAUKEE M12 2.0AH BATTERY WITH 2PC CORDLESS COMBO KIT PURCHASE until 10/30/2022 at Acme Tools: imp.i284638.net/c/2377215/144...
This tool was given to me in exchange for creating an unbiased video about the tool.
Amazon Prime Student 6 month Free Trial: amzn.to/2J4txZw
As an Amazon Associate I earn from qualifying purchases.

[@oshtoolman]

wish I needed those!!!! I love tools. But, I'm retired from working so I dont need them. Want them? Yes!!!

[@SparkyChannel]

Yes, they are nice!

[@chipperkeithmgb]

Me too

[@a.j.demeat6167]

Have used this kit for sometime now. Noticeable increased Milwaukee hole saw kit speed, along as the lenght of life. Excellent for clean quick holes in Union made duct work for those all important smoke detection housings.

[@SparkyChannel]

Great to hear! Thanks!

[@garydudgeon]

Great demonstration Sparky. Milwaukee is really putting out the new products. Hand tools, electrical and plumbing specialty items., automotive. Wow.

[@SparkyChannel]

I agree. Thanks Gary!

[@gamingx6599]

I love this set comes with everything and very useful

[@SparkyChannel]

Yes, a good range of bits. And durable.

[@romarro4616]

great video thank you sparky

[@SparkyChannel]

Very welcome!

[@charlesviner1565]

Thanks for the video 👍

[@SparkyChannel]

No problem, thanks Charles! 👍

[@Guardducks]

A second WSU thi get that plug out is to take two 3" screws and screw thru the wood plug and the screws will pull that plug right out add you tighten the screws down.

[@SparkyChannel]

Excellent tip, thanks!

[@Guardducks]

@@SparkyChannel why thank you sir, enjoy the weekend. 👍🏼

[@SparkyChannel]

@@Guardducks Same to you, thanks!

[@Timothy-NH]

The largest of the 4 smaller hole saws, if you look at the bottom, you'll notice that there are matches that allow you to use the larger mandrel with the pins.

[@SparkyChannel]

Thanks, I'll check that out.

[@kenbrown2808]

@@SparkyChannel I caught it, too. it's 5 on the large mandrel and 3 on the small.

[@SparkyChannel]

@@kenbrown2808 Yep, just checked it out.

[@mdrew44628]

Thanks for the hole saw demonstration. I noticed the nut loosened up when you were cutting one of the holes. Is that nut just supposed to be hand tight?

[@SparkyChannel]

Welcome. Yes, it's supposed be hand tight. It may have started coming loose going thru the sheet metal on speed 2. I should have been on speed one. Good idea to check that nut after something like that.

[@donhgr]

What’s the difference between this and the one I bought from them a few years back, even the case is the same

[@MrTooTechnical]

Fuking awesome

[@SparkyChannel]

Thanks Dave!

[@kenbrown2808]

I prefer the milwaukee bimetal blades for cutting stainless. and the true test is cutting (James Hardie) fiber cement board. I can get about 50 cuts out of a Lennox carbide blade before it stops cutting the wood sheathing.

[@SparkyChannel]

Thanks!

[@kenbrown2808]

@@SparkyChannel another tip for those thinking of switching brands: the manufacturers of most holesaws make the blades and mandrels interchangeable, so you can use one company's blade on another company's mandrel.

[@butthz8850]

I recently used the red version of these (with the quick connections). It says any material, but I wore out all the teeth drilling metal boxes.

[@SparkyChannel]

Did any teeth break off or did the teeth just wear down?

[@butthz8850]

@@SparkyChannel looked like both happened.

[@SparkyChannel]

@@butthz8850 Yep. I do everything first take though. Anything can happen. It's more realistic that way!😅

[@mailchrisbailey]

i always drill my 1/4" hole before attaching the holesaw. saved a number of holesaw teeth that way because you will inevitably slam the saw down on the workpiece after the pilot bit punches through

[@volcomguy51]

Would be awesome if you compare this with Diablo hole saw blades

[@SparkyChannel]

Great idea!

[@mailchrisbailey]

i've used both. the teeth are comparable but the diablo mandrel has come apart on my into pieces. the milwaukee is way more reliable

[@michaelthompson7570]

Bits look like a winner,,the drill not so much. Have heard miwaukee has really gone down the toilet…

[@onsiteelectricianscott4025]

Know what size hole saw you need before using this kit. This kit sucks, it's for wood and soft metal, I bought this kit and the 3/4" conduit holesaw is 1 3/8" diameter , should be 1 1/8" , also after one hole in a standard panel the saw was garbage, I have the smaller holesaw kit and had it for a year, drilled allot of perfect holes and still has life in the saws, my basic opinion is that kit is junk, get the small kit and pay attention to the saw sizes

[@onsiteelectricianscott4025]

Well if you didnt have to start with a holesaw then I would, maybe I will invent a box of 3/4" holes