After watching several videos before this, this one is the most helpful. You explaines everything without having to say too much. Thank you! I am now confident im up for the quick swap task.

Hey man are you still in sd?

Yes, it was helpful. I bought mine at Lowes. It did not show in the inventory and the package appeared a bit damaged. But, I bought it so your video helped. I installed a gas water heater and afterwords, smelled a little gas. None of the connections I made appeared to be leaking with soapy water or the Klein Tool. I checked a connection up the line and it passed the soapy water test. Then I used the Klien tool and found where it was leaking and tightened it. So, the tool worked great. I am glad I made the $119 purchase.

Kevin Gates the best rapper in the game 😌

the testing you've done proves nothing, theres nothing here

Slowly tighten each bolt. Do not fully tighten one bolt and then do the same for the next bolt. That will make the gasket seat properly.

This bag was expensive and only held like 2 power tools and a few other hand tools. Save your money and just buy something else at HD or HF for $200. I still have it after all these years but it is NOT for plumbers. It is made with high quality material though so there's that.

And Empire is a USA company from Wisconsin!

He’s deep fake Scotty ai is now in your feed lol I heard him and had the same thought

Nice video the only thing I didn’t like was the speed wiring. I prefer to still twist it around the screw. But a fantastic video and code !

$100 on Home Depot website. Many available now! Comes in a kit with bag and battery! 🔋 If you are lucky, you can get next day shipping!

I like your videos very easy to understanding and you sound a very humble person and like those evil

If the laser can be used to test voltage as well, that would be great

What about heat on the system

I just bought the dewelt, but both work fine for electrical cables... I'm going to use the Dewalt 4/2 inch. Pecks, and it looks like it will require a hammer swing to firm it up.. From this video either one will work.

Will it cut a 12-2 BX?

4 torx bits? Why?

Thank you.

These are my main stripper. Love them

Great explanation! Okay, how would you do the main headlight on the passenger side? Mine is not centered right and sits higher than the driver side. Thanks!

I have a question, I hate this light. It’s in my kitchen and it’s connected to the same switch as the small light over my sink. How do I get it to turn off or put on a different switch?

What if everything is wired fine but still have an open hot? Bad gfci?

Thank you for making this video! You just helped me out a bunch!

That's all good ,this only works if the gfci is tightly secured to the box ,suppose the mounting screws loosen ,if this happens you lose your ground, this is why I prefer ground pigtails

Also, just realized that if you're using something plugged into that receptacle, and it trips, you'll be standing in the dark?

Does the plastic backing plate need screwed to the mud ring? If so, what's the point of using a "screwless" wall plate if the backer plate needs screwed to the box? That adds an extra step, whereas a regular plastic wall plate would have been just fine, correct?

Masterful explanation

Thank u so much such for excellent knowledge. God bless you. Wish you all the best for future. Marry Christmas and Happy new year.

Thank you !

Hi, I the first bend you subtract 5inch, and the second bend you use the star of the bender why? It's not the same 5 inches subtracting? Thank you for showing us.

Thank you for sharing this brother 🙏

Sds max is good for heavy duty work 💪💪💪💪💪💪💪

How about a video on two 45 degree corner bends with a two inch round obstruction, Thanks

I thought sense you are using a 45 degree bend for the center wouldn’t the shrinkage be 1/4 ? 3/16 is for 22.5 which is the outside marks

My grandma and grandpa had one with that loud click in their bathroom

I wish I would have found your channel first. You do an amazing job of explaining and demonstrating!

I swear i just looked at those yeterday. Some of the direct mount boxes that are in line with the trust are incompatible with fan mounts that have anti-rotation Notch 90° offset from that axis. Someone in the electrical industry needs to talk to someone in The Fan industry...

Is great that there such much NEC talk about basic code, but we need more material on material that is more complex such as special equipment , motors, and special conditions.

Great video, thank you.

I agree with the answer to this installation. If you install an NM cable at a single-gang non-metallic box without a cable clamp, then the 18-inch cable length is not allowed. 314.17(B)(2) Exception requires cable support within 8 inches of the box measured along the cable length.

Do you have to ground all the outlets down the line from the gfci outlet

You turned off the breaker after you checked the first plug, then checked the plugs well are they n ot all off? should you turn on the breaker back then recheck?

Thank you for your videos Sparky, I tell everyone I can about your KZbin Channel.

Miss ya bud !

There are 2 Klein borescope apps. One is called ET 16 and one is ET 20. Mine works on ET 16 but it doesn't work on ET 20. I have a fairly recent model Android phone. So if you are having trouble, try the other Klein ap.

Spaky, at 4:10 "enhanced comment" . "Regardless of the width of the electrical..........ect..". Exactly where can I find this 'enhanced content' ? Sounded like you said "2023 AC handbook"? Looking everywhere but to no avail. Thanks for all your help. P.S. I have the new 2023 NEC 70 code book, and the 2023 NEC Applied Codeology books, but don't see it anywhere in there.

I ma new sparki helper wish me luck fellas

Awesome video, thanks

Same the Corolla 2006