BEST Car UnderCoating & Sound Deadening (Under $100!) For CHEAP My Evo 6

We continue the rebuild of the Mitsubishi Lancer Evo 6 VI to beat our Subaru STI by dealing with the rusted chassis and underbody by cleaning the rust and painting/converting it with the following coatings and parts:
AEM 340LPH Fuel Pump: www.aemelectronics.com/
Boom Mat Surface Prep & Spray On: designengineering.com/
Boom Mat 6-pack: amzn.to/2QrvUHc
3M Spray Handle: amzn.to/39GGEcd
Ohm-Racing Harness:www.ohm-racing.com/
Supported By Koyo Rad: www.koyoradracing.com/
Join Our KZbin Community: goo.gl/n4m3Ez
Our Patreon page: / speedacademy
BUY Merch Here: speed-academy.myshopify.com
Buy Conquer Helmets: amzn.to/2Moadq0
Favorite Tools:
Astro LED Work Light: amzn.to/2r70JUu
LED Bay Shop Light: amzn.to/2HHBw9D
Milwaukee Ratchet: goo.gl/2Cvuzm
Milwaukee Impact: goo.gl/kxnJTg
Miwaukee Sawzall: goo.gl/Sbw5FC
Fluid Transfer Pump: amzn.to/2ILVP9u
Uvex Face Shield: amzn.to/2jgZttO
Astro Rivnut Tool: amzn.to/2HAZN51
Rivnuts: amzn.to/2Fse0v8
Canon 70D Camera: amzn.to/2U72BrR
Canon Lens: amzn.to/2HD4Pd7
Rode Microphone: amzn.to/2FsGeGa
Zhiyun Gimball: amzn.to/2WTtFww

[@CUJOtheMASTER]

Chargespeed sells a Carbon fiber dash For the evo 4/5/6 that retains All oem functions!

[@strongerandwiser2023]

Its just a cover is it not ? Its not actually a dash.

[@dreed5965]

If you had it stripped down like that already it would have been best to wire wheel it down to bare metal removing all rust, treat with a proper rust converter, seam seal it and then properly undercoat it. I’d question the longevity of what’s been done as you haven’t removed the rust, just treated the surface of it, if that spray works as they say it does. Loving the series so far.

[@bobbobo4748]

Undercoat is shit anyways.. strip to bare metal and wax it thick. There are waxes that will stay forever and it cant rockchip.

[@hondamanvtec2894]

Well... if you did what you say.. wire wheel and stuff... it's still gonna be rusting

[@FrankkMedia]

@@bobbobo4748 what?? Undercoating with oil based spray is way better than wax. Wax dries overtime and cracks letting moisture in.

[@bobbobo4748]

@@FrankkMedia that is wrong. Look up Mike Sanders wax. It doesnt dryhard. Oil based stuff mixes with water and looses its protection.

[@FrankkMedia]

@@bobbobo4748 oil based is meant to be reapplied every year and water doesn't mix with oil actually mine cannot even be sprayed off with a pressure washer. And you're talking about 1 type of wax from Sanders which isn't readily available to Canadians and less proven.

[@dancarlos1216]

SEM is a company that makes paint and dyes, I converted an EK civic from gray to black with a few cans of special interior dye paint stuff. It looked awesome and didn’t wear off!

[@FranRuiz]

Flock it! it´s a rally car! haha Cheers from Argentina!

[@gonz147]

39 Argentinos?

[@FranRuiz]

@@gonz147 parece que si! jajaja Falta que haya alguien mas de Córdoba! jeje

[@nacokid]

@@gonz147 de uruguay tambien

[@tommyhagman5843]

no

[@vincep7014]

Use a mil spec connector for the harness. That'll make it even easier than adding extra plugs on the inside

[@ChrisHale0629]

"Welcome to another..." Thumbs immediately up.

[@JamieD1994]

The rust isn't gone, it's just hidden. It'll be back don't worry

[@JTheMoneyable]

Man can’t wait to see how this project comes along. Keep pumping these vids out, I wait for the notifications on this build. Lol

[@OriginalRangsta12]

What a transformation! Love your continued great work guys!

[@OliverRivettCarnac]

Yasss you guys are just awesome. Loving the work you are doing and digging this build! Great work guys. I wish your channel got more subs!

[@mikea5205]

Its almost like manufacturers want their cars to rust so you can buy a new one every 5 years. So easy and cheap to rustproof. Nice job guys.

[@FigureItAudi]

Great series and I especially enjoy watching some fellow Canadians going through these meaty projects and dealing with sourcing parts and skills at home and abroad!

[@infamousjdp]

What a transformation! Awesome video guys.

[@AWOL_ODST]

The grey dash came in the big stock basic/mass produced Lancers like the GLi and VRX ones. Only the EVOs 4-6 had the black interior dash (plus the MR I think). Either repair the dash or get a proper EVO one. Would be sacrilege to put a grey dash in a CP9A 😜

[@peterush8709]

In Europe the colt/mirage from 00-03 in sport version had also the black dash. Earlier models from the normal Lancer/colt/mirage had all the grey dash.

[@masterpayne3791]

I didnt expect this episode to be as satisfying as it was. Great stuff!

[@vapewavesandsubarus]

Im amazed by how perfectionists you guys are when it comes to your builds, i am working on a project currently and the last thing im worrying about is a pretty dashboard 😂

[@moto55yz]

Loving this build! Keep up the good content!

[@markt9438]

Hey Guys I can really appreciate the Bottoms Up restore ! Had a 71 SS Chevelle that got prlled from Junk yard and no lift did the same thing using JC whitney's brush on rust eater and then just did the black undercoat ! Your upgraded product look a whole lot sweeter ! And sure to last 2 times as Long !! 20 years easy !!! Lots of Love you guys are Great !

[@tepidtuna7450]

Oh my kingdom for a hoist like that! Great vid and gratifying just watching too.

[@ceescorner]

I used dawn dish soap to clean my dash, then acetone, plastic adhesive primer, duplicolor black, i did about 10 coats total. It lasted me 5 years, sold it and its been going another 4 years no issues. I vote you flock it if you do not want to paint it. It being the better looking gray one.

[@ZHPBrent]

amazing work as always guys 👌🔥

[@thecarguymorales6342]

Nice work guys🔥

[@jacobjudt2534]

Late 90s Subaru’s are very similar to having the dash, engine and chassis harness all together. Such a pain to pull out. Awesome series.

[@ampedex]

Such great content, the fact you don't have more subscribers baffles me

[@AndreTan28]

I believe that the grey dash came from a regular Lancer.

[@Villajesse]

Love the build guys. Just as a point of reference the STI had wheels on by episode 5 . Either way glad to see it’s moving along

[@marcinsuterski4455]

This was a great episode. The coating seemed great. Would be great to get a follow up on how it holds after next winter.

[@justin7190]

lol, “ Thicc with two C’s” haha you guys are great, keep up the good work. looking forward to seeing the evo back in one piece

[@Ride2Xplore]

Wrap the dash in alcantara!

[@shanucfr]

6:22 "further out" Pete you are officially Canadian, congratulations

[@matthewlittle6940]

Love Love Love this car :) glad your getting that old maritime rust taken care of lol it's something we fight endlessly

[@anas.tft.]

fill up the holes and wrap it in alcantara for sure ! it will look 150% better ! i had exact the same issue and thats what it did and i love it

[@bantown00]

Vinyl dye works wonders on those dashes. I dyed my blue dash black in my s14 and it looks perfect oem finish.

[@Precisionmagert]

Love the details of this sti killer build. I believe the dash you bought is a early version of the evo

[@pFbSpecV]

That came out great!! Makes me want to do the same under my galant vr4!!

[@skitzvitz]

Pull everything that can come off from the replacement dash. Prep and paint it or flock it. Replace everything that was pulled off with the black bits from the original. Its the easiest way to get a great looking dash. Also the belly of the evo is looking mint!

[@WelshyAutomotive]

I remember seeing this car around my local car scene!

[@suttonsplash14]

Speed Academy rules!

[@sarahdell4042]

Tommyfyeah has a front clip sitting in his shop. Reach out, and see what colour his is.

[@therealpofo]

Yes he does, but he is going to want all the money for it. I dont blame him.

[@ryane2626]

Pretty sure he has a spare one in the uk as well.

[@1234extremelyreree]

Nice job boize!

[@ianmccormick247]

@speedacademy fantastic video. The chassis looks amazing now! Perhaps you could wrap the dash with new leather or alacantara!

[@arturo762]

The upload time is so early I forget to watch. Good thing it still gets recommended though.

[@cheesepizza87]

Test flock the old dash, the underside came out brilliant

[@juusojauhiainen1963]

Colored one LHD (EVO5, but basically the same dash as 6) gray dash to black on basic market spray can stuff, worked out well. Just many thin layers and it wouldn't wear off on the time I owned the car (2013-2016)

[@ashy_gee6]

Love the episode can't wait for the next...I gotta say that air quote 'STi Killer' got me butt hurt...lol

[@honjon5766]

Just flock the dash!!!! Yall will be glad you did

[@hi2lenduffy837]

Nice work

[@jonkat323]

Good job bois

[@brycerehder8372]

Much much better!

[@joshjones2053]

Just flock the grey dash and be done it's already out get it flocked it will look amazing!

[@jamest5149]

Hope Ohm Racing can make two separate harnesses, one engine and one chassis plus use MIL spec bulkhead connectors so you can easily split the harnesses from the bulkhead saving any dash deconstruction in the future- looking forward to seeing what they do!

[@upgradeNEVER]

This! Also, this is a GSR. The RS from memory doesn't have AYC, as they're essentially a rally car, and AYC is outlawed for rallying. If you can afford it, fit the RS gearbox and diffs, cos of the shorter ratios, and stronger diffs.

[@DaveSabol]

Great stuff. I'm actually curious to see how this build turns out because of the challenges. But the 3M Scotchbrite pads and some alchemy by Boom Mat seems almost too easy. And DP, at least where I'm from in the lower 48, we've always pronounced Celica phonetically - Sell-IK-a (so no eek) in our vernacular. Great restoration project. Can't wait to see it hit the streets.

[@dirtywat]

Lol I'm a tech and I felt your pain when you were trying to take that harness out 😣 Best of luck when putting it back in! On Patreon, can we have behind the scenes footage of you guys cussing these cars out... That would be too real! 😄

[@squiggsgarage8601]

Spray the dash with SEM interior dye in Landau black. Works great! Prep first with wax and grease remover, scrub and scuff with red scuff pad and dish soap water, wipe with wax and grease remover, dry, then spray with 3 even coats of the dye. It will look factory.

[@pantheotavares2226]

Flock the dash to black. I've done it and it looks really good!

[@AndrewJSimpson]

Well this is turning into a big project real fast.

[@tda0016]

that gray dash is came from a mirage. all evo dash comes out in black.

[@peterush8709]

That's right

[@user-jt6nw6wm5q]

isn't any evo an sti killer from factory?

[@alanedwards3180]

Err no

[@darianistead2239]

@@alanedwards3180 Yes, most definately.

[@tda0016]

Alan Edwards

[@crxvtec92]

Flock the dash, perfect rally spec!

[@Qgal5kap123]

This is a great opportunity for you guys to get a media blaster.

[@Scottdahockeyman15]

Damn man, I have an evo 5 that's been off the road for a couple of years now, and I just don't have the time or money to go through it and give it everything it needs. I hope one day I can do as good of a job as you guys.

[@alisterhemmings8121]

You could get the holes holes more uniform, and then cut a plastic to the dimension and fit it in,plastic weld it in,and....though it may be a tad bit ricey,can hydro dip it...not necessarily carbon fibre finish,but may be even black. Or you can paint the grey one black

[@madmike5144]

I would do flocking to that dash...That underside looks awesome

[@braydonscully4646]

Paint the grey dash, easy peasy, since it’s out of car

[@WelshyAutomotive]

or wrap it in suede or something.

[@braydonscully4646]

Welshy I like that, a nice alcantara wrap would look sweet!

[@WelshyAutomotive]

Braydon Scully yea! And maybe a half dash, and put in nice pedals, and a foot board for the passenger.

[@bmcshane80]

Or flock it black, even easier

[@markt9438]

I think it would be die able ! No Peal !

[@captriskybiscuits8785]

If you do want to paint the dash I'd recommend SEM trim paint. It's really nice though I'd go with the carbon chargespeed.

[@jackraphael9482]

you two guys and Mighty car mods collaboration would be amazing.

[@shiftdowntv4511]

I chopped my fuel lines to put in a AEM320 pump. Just need to make about a 1/2" or 1cm gap in the lines.

[@jonathanlantz6851]

Vinyl and fabric dye from the parts store it works great it's in a spray can but it works

[@alexmuri1828]

What if you scavenged a small piece of the black dash from somewhere non visible, drilled the two holes out cleanly and plug them so you have the same texture and just have to clean up a small edge

[@shoaibyasin5518]

I’ve got a black dash but I had a grey one which I flocked it in black they will fit.

[@gimmethecarkeys]

Just thinking since you guys had that fuel tank out might be a good time to check the sending unit and make sure it's working. Would suck to get the whole car put back together and realize the fuel gauge isnt working and have to remove the tank again.

[@deano_s2k]

You can plastic dye the dash black. Fill garage bin with water and the dye, then submerge the dash

[@Otani_Garage]

Use some of that SEM interior dye. Ive heard its not like paint and it really penetrates the upholstery and holds up pretty decent over time

[@RacingGameCentral]

CT sells a duplicolor interior paint that will give you a really nice oe finish but only if you really prep the dash by removing all the mold release contaminates and oils by using a good wax and grease remover

[@garagecedric]

In vinyl seat repair there are methods for replicating the surface grain in the repair. Maybe something similar can be done to the dash repairs.

[@Riley180sx]

You can get black dash’s out of the mr 1.8 lancers

[@slipshot139]

You could always try painting the grey dash with SEM trim paint and see if it matches up

[@mondomoleno.3404]

Flocking is a pain, but it does make it look good if you take your time.

[@seanevans8767]

Just paint the new dash black super easy and very cheap solution, use plastic bumper primer first so the paint sticks.

[@therealboofighter]

The underside does look nice. Did you have a chance to tap or bang on the top side before and after to test the sound dampening qualities?

[@heyhayhay247]

Plastic weld the dash and flock just the top surface of the dash. mask off a hard line that follows the contours of the dash. It could look very OEM plus!

[@clayduval1255]

Any chance you guys know how much weight the boom mat spray added? It looks pretty nice and I'll probably consider doing this on parts of my Miata

[@Namesi]

I started watching this channel for the Celica...where's Connie!?!?!

[@woopimagpie]

And Moose! Where's Moose?

[@Namesi]

@@woopimagpie Yeah! Where's Moose?!

[@DefSR7]

SEM color coat will dye that dash no problem, really durable on stuff like that

[@becomeraptureready]

This video was yet more conformation to me that the Evo X is a much better platform. The only advantage of older Evos is the weight, but my Evo X is at 3200lbs and is still my daily. The Evo X is so easy to work on and is perfect for fixing at a stage

[@dancarlos1216]

Blaine Petkau Yeah we all like older stuff, but sometimes the new stuff gets a lot right. Although I’ve always loved everything Honda has done since the late 80’s

[@smallwoodmatt]

fix and flock the old dash

[@WorkinDuck]

I would love some alcantara in the interiour for some luxury vibes

[@corwininadsm]

I would love to hear this with some choppy cams and a deep tone 3.5 exhaust.

[@ShadedOut]

For the dash, use Vinyl dye, it's not quite paint and its meant to colour those types of trim pieces.

[@Tx240sx]

SEM products: SEM soap, SEM vinyl prep and then the aerosols. Do a mix of landau black and satin black to get more of an oem sheen

[@Mattmazz77]

I would definitely attempt to plastic weld that dash and finish it up like body work and after you paint if it doesn't look good maybe incorporate some kind of carbon fiber wrap into a design of some sort so you don't have to wrap whole dash. If it comes down to it you have another dash. As far as the other dash if you prep it properly I believe you can spray it a different color and not have it flake. We pronounce Celica the same way as you...lol. Really like the channel, enjoy your content would be phenomenal if you were working on an Audi though....lol.

[@ronbieman4049]

Try painting the grey dash with duplicolor vynil and fabric spray paint. $16 Canadian tire, worked for me looks pretty legit

[@luukvanrijn1462]

do a flocked dash that would be really cool !!!!!

[@cameronbeyer7687]

For the dash, I’d throw some bumper plugs on there if you don’t want to deal with the extra effort

[@jp2246]

Looks great! Regarding the dash, not a fan of the flocking look personally ...

[@Maxx8666]

Have a look at AMMONYCs video on painting interiors. They use some acrylic paint, and the finish looks awesome. Very OEM like. Maybe you could do the same to the grey dash

[@jamest5149]

It would have been a good idea to remove the sill/rocker covers and rear bumper cover before doing this, just so everything is protected. Also it would have looked OEM good if you had run 2 or three cans of the colour matched silver just to finish it. The product does look really good.

[@boomboombeach404]

best is to remove all the rust with wire wheel or flap wheel , than use hydrochloric acid for the places you can't get easily to. Make sure to neutralise and remove the acid after your done with it. Then use zinc rich primer and than factory style undercoating and cavity wax for the inner sills and rockers. You can also use extra wax on top of the factory style undercoating for extra moisture and salt barrier. Other than that you're channel has great content greetings from the Netherlands

[@Busydadgarage717]

Spray dye the grey dash black. Using the dye actually gets into the plastic.

[@dbstherollers8106]

Yes flock the dash that would be really nice

[@darianistead2239]

All EVO and GSR's(4g93 turbo) dashes are black, they are identical to lower spec lancers of the non turbo variety which are grey. You can dye it black so long as it's prepped properly.