It's Alive! Jenvey ITB Startup - Project BADASS2000 - EP10

The time has finally come, Pete and Dave start up the BADASS2000 with Jenvey ITB's for the very first time.
For Speed Academy merchandise including stickers and t-shirts check out speed-academy.m...
To donate to us check out our Patreon page: / speedacademy
Follow us for up to the minute project updates:
Facebook: / gofastwithclass
Twitter: / spdacademy
Instagram: / speedacademy
Web: speed.academy

[@clydefrogct9a]

This channel is better than any television show about modifying and repair that I've seen in the last 10 - 15 years . Keep up the great work !!

[@PeterPorsche1]

Arnold Voice: GET TO DA DYNO

[@RacecarDriver-sn9wt]

this channel is so under rated it makes me sad :/ looking forward too seeing you guys one day at tmp

[@speedacademy]

+Daniel Bipatnath Thanks so much, hopefully all our hard work pays off soon!

[@andre.oliveira.alphaspark]

+1

[@deweberis6656]

Love the way you came honest on this project. Missing parts, tools, calling tech assistance, following advice fm other builders... The awkwardness on Pete's look after every miss and delay was priceless. xD A true picture of a project car hit and miss.

[@AtalldarkMinh]

Out of all the car channels on KZbin, Speed Academy is by far my favorite. You guys are so thorough and enjoyable to watch

[@speedacademy]

Thanks so much, we appreciate the kind words.

[@doctorlobsteroctopus]

It's also great to see PT back in the shop, the dynamic between all of you guys is great.

[@andrewonsnow]

Hurry up and get to the dyno!!!

[@BertoBerg]

Pete dressed to match his car! Thats a true car lover right there.

[@stevegoodwin9067]

I've got to say it baffles my mind why you guys dont already have 1M subscribers!?! you guys make amazing videos and I share everything you do. keep up the amazing work and hopefully word spreads faster for such awesome content you guys do.

[@speedacademy]

+steve goodwin Thanks so much! We're trying hard to build a bigger audience so thank you for sharing our stuff, it definitely helps!

[@wima4898]

If you know anything about being a mechanic than its real easy to figure out.

[@joshansin30]

Finally! I know I'm not the only one who was waiting for this. Worlds longest ITB install lol.

[@BlakesGarage]

Those ITB's are going to suck the brake booster into the motor! SOUNDS AMAZING!!!!

[@TassieLorenzo]

Pete doesn't miss a trick! What a machine man. ;)

[@JohnmillerPowerlifting]

ITB's on an s2000 is just awesome

[@tiagobernardo6807]

Can´t wait for that dyno run!

[@andersw1152]

Great job guys, don't forget to sync those throttlebodys :) I used a cheap STE Synchrometer on mine, it's really quick and easy to use.

[@SweazyRaskal]

About time you guys have woke up badass2000

[@vinhqle10]

I see that the datsun is getting so love!

[@Aiello_]

i'm in love with this car

[@ravenstylea2]

Im am super excited for the build on this car!! It's a wet dream!!

[@leefhead1]

the massive injectors are compensating for the very low fuel pressure. you guys need to get that fixed before you get it tuned. also the check valve in the fuel pump or at the pressure regulator doesnt seem to be working. i would start with the pressure regulator. The low fuel pressure is likely due to the pressure regulator, just adjust it up. grab your laptop and adjust for 1000cc injectors and try it again. good job guys. I move from Sudbury to Markham at the end of the month, hope to see you guys at some track days!

[@RobertKohut]

+Lee Forget Hey I'm from Sudbury too!!

[@speedacademy]

+Lee Forget We'll be dialing in the fuel pressure at the dyno as the lower pressure right now is helping to reduce fuel so the engine is at least running.

[@darrylb6461]

Waited so long for this day. Excited to hear her run

[@ricoraxelhd]

Those ITBs sound sick!!!! BTW when is the RX7 update coming .... i can see Ken finished the aero package

[@marcosaruca5283]

WE ARE GOING TO THE DYNO GOD DAMN IT!!!! another one that should go on a shirt

[@gt86dude16]

Swwweeeettt! The sound of ITBs is awesome!

[@andrewmcwhirter6567]

I just binge watched all the (BAD)ASS2000 episodes. I'm hooked. GET IT TO THE DYNO!

[@speedacademy]

+Andrew McWhirter Awesome! Dyno tuning is coming very soon!

[@Bunchofhelmets]

Gawd the sound! Can't wait to hear her scream on the dyno.

[@danisaelwm]

Videos are always better with Pete on!

[@JCE10NYC]

Finally going to the dyno,can not wait to see what kind of numbers it puts down.

[@SimTrixSon]

i liked this episode before starting the video. Can't wait for the dyno and tune episode!

[@CrossWindsPat]

IT HAS AWOKEN!!!!

[@imSchwaggy]

the beginning i was staring right at what i believe is an e30 . idk why i love that front end so much

[@Smngorin]

Can't wait to see it at the track!

[@mokagie]

do a itb filter vs itb w/o filter comparison on the dyno! myth busters yo

[@aiGeis]

There's simply no need to, this has already been test with many turbo build, and the difference is usually a couple hp (in favor of no filter). A setup similar to the airbox>itbs on the older e46s would be the best, sucking in dust and shit does have a noticeable difference on the internals when it's time to rebuild.

[@StarCinemaHD]

This channel is incredible. Htf do they not even have 100k subs? You'll get there super soon. With content like this no doubt

[@TheSuaveBOSS]

NICE!!!! So juiced for the dyno video to come!

[@maxgeek]

Love the ITB sound!

[@olivershearer3034]

I am loving this build, along with all the other amazing stuff you guys do, really love it all. the Badass2000 is really starting to become a beast!

[@TheMXinsidE]

It's ok Pete, the weather is getting nicer here in Canada :)

[@OliverRivettCarnac]

Epic! Those ITB's sound awesome. Looking forward to the dyno vid and than as Dave would say "let's rip"

[@speedacademy]

+Oliver Rivett-Carnac We are too! The excitement is high.

[@joeykhoury7491]

It's my birthday today, and they release the episode I've been waiting for, I LOVE YOU GUYS

[@speedacademy]

+SNJ Steaddyy Happy Birthday!

[@joeykhoury7491]

Thanks guys

[@krazykorean42069]

IT'S ALIVE!!!... kinda... WOOT WOOT!!!

[@mondomoleno.3404]

It sounds brilliant! Can't wait to see what this setup can do, and to really hear that VTEC scream!

[@idoruZe]

You guys are the best - thanks for all the amazing videos. Hours of enjoyment as you journey along with these cars!

[@speedacademy]

Thanks man, we appreciate it!

[@AngusOutram]

This car is way too cool for some reason! it's like every mod I want to do to my miata

[@speedacademy]

+Guss_Bruss ITB Miata is awesome!!

[@wefam8682]

Te Badass2000 is te best car project for me. Since i was a fan of it. Great work SA. Keep on uploading on your badass2000 :3

[@ramonvelasquez1796]

that hat looks dope can't wait for the next video

[@Antiorthodoxy]

We're going to the dyno!!

[@pchae1]

You guys are so awesome! Thank you for bringing us these video, they are true gems. I look forward to that jar of fart Pete.

[@pswmetalmonkey]

Fuck yea! good to see you guys again... and most importantly one step closer to the BADASS2000 been finished!

[@Dnaiss]

Great stuff! This project is really neat & cool.Please, keep this engine NA, that's what it's been made for and that's the essence of this car!!(side note: it seems the thread pattern on the front tyres is inverted, left wheel should go right side and vice-versa)

[@DimZin]

Good job as always.Time for a good tune,and dyno numbers!

[@Georges502]

that sounds so good, im excited to hear that thing reving high at the track

[@luishq9945]

Man I excited! I can't wait to see what it makes after the tune

[@michaelharvey313]

Nice fitbit! hahaha. that damn thing always gets in the way when I'm working on my S2.

[@speedacademy]

+Michael Harvey Ive scratched it up one too many times now working on cars. :(

[@agfx000]

A better way to do the wiring is to put the pin on the stock wire directly. That way you don't have an extra connection to fail. I would also open a hatch in the hood above the ITB's to supply fresh air.

[@Ryousure]

yes this the best method

[@PeterTarach]

The placement of the injectors on the ITBs necessitates extending the wires. Otherwise I wouldve wired them on directly.

[@cinos78579]

OMFG FINALLY!!!!!! I've been waiting for a new BadAss2000 vid for-fuckin-ever! Lol

[@richardwarner5465]

Are you guys coming to Grid life? Bring the BAS2k!!

[@qwerty-fc9ix]

Hurry up and get to the dyno!

[@Loztown]

Why didn't you cut the wires close to the old injector clips. then put the new pins onto the original wires? Would look so factory, and would probably last longer.

[@speedacademy]

+Lawrence Selly Issue is the wires were too short so I had to extend them to reach the injectors.

[@Em0KhRiSxP]

This was like waiting for Christmas as a child

[@AnthonyBroskey]

It's back!

[@f22cap2s2k]

Clip adapters would have been so very convenient! Regardless...it's alive!!

[@pFbSpecV]

Sounds so badass!!

[@d0mochi]

cant wait for the dyno vids. lets hear that vtec transition

[@speedacademy]

+Slow AP1 We're hoping its going to sound amazing!

[@SpiderMax95]

that sounded badass :D

[@Fitzsanchez]

can't wait to see some track vids! Already sounds so nice!

[@tboe0]

I'm dying here *_* Revving on a cold motor thats have been sitting a while...

[@speedacademy]

+Tobias Thomsen Its a Honda it allllll good! :)

[@OkayishOffroad]

Damn that's a nice battery tie down! ;)

[@phamscb]

Yesssa'!!! I love this series. Thank you thank u

[@ilyafr86]

No turbo!! keep it N/A!! maybe try a dry sump system? That'd be very cool to see the comparisons for a track car :D

[@ericcastillo207]

sounds so good...

[@VS666]

wtf does this guy do for a living? track s2k and a budget to rebuild a porsche motor? fuckin rollin!

[@MrJynx199]

Hurry up and get to the Dyno!

[@justintime6160]

YESS!! Now.. we need some S14 videos pls! love you pete.. xoxo P.S. need a speed academy simple pocket tee pls!

[@speedacademy]

+Theonlyj2kk Working on the S14 so a video will be good to go soon! And will try to add a pocket tee shirt.

[@justintime6160]

yess! thanks x2 boys :) Simple shirts is all I rock haha would be sick to have one, thanks dudes.

[@kussamanga]

Sounds amazing

[@rustler1999929]

Finally Sound Crazy :)

[@dudesweetpro]

You guys can use black oxide stainless fasteners if you want rust free black hardware. Can be a bit tricky to find. It costs like 170 for a batch run of them if you can't find um but want them bad.

[@speedacademy]

+Brett Himeda Dang, that's pricey. We are thinking we'll just paint them body color and see how that looks.

[@innes887]

Sounds great! raise the base pressure on that regulator

[@speedacademy]

+innes887 The plan is to adjust everything at the dyno.

[@detailrouge6230]

I’m just here for the S2000 content 😊👍

[@TNWWDGTFilms]

for some dope ass crimps for cheap buy non insulated ones in bulk along with heatshrink. I've found them to be the cleanest crimp method. nobody likes brokeboi wiring especially on the track.

[@jesseestrada260]

Cant wait!!!

[@dlee6985]

I have a suggestion for all your tool woes. Princess Auto! lol. #powerfistforlife

[@OhHolliwould]

YES!!!!!!!!!!!!

[@r1yamahamini]

I use 1970cc x 4 injectors in my little rotary :)

[@ElementalMapping]

FINALLY

[@DJFreshSensation]

Bout damn time haha..... NOW GET TO DA DYNO

[@mexicalpango]

Itbs!!!

[@MrRubbish05]

Finally!!

[@doctorlobsteroctopus]

Commenting while the video is just starting..this is gonna be epic! Loving all the work coming from you guys, about to go buy something from the shop. Maybe y'all could sign it?

[@speedacademy]

Sure man, if you want us to ruin your swag we're happy to do that lol. Just leave a note on your order.

[@doctorlobsteroctopus]

+Speed Academy Haha but if it has PT's signature, won't that gain me some tinder points? Lol. But in all seriousness I look up to y'alls work and very much enjoy your content, it'd be pretty cool to have a signed hat!

[@speedacademy]

And sure, happy to sign a hat for you!

[@doctorlobsteroctopus]

+Speed Academy Well they'll have to hunt you guys down for that money, cause I'll have spent the alimony on Speed Academy swag and car parts! Super stoked though, placed the order and now the waiting game. Thanks guys, and keep up the hard work!

[@jamesfurnival8381]

when is the evo coming out of storage ;) im guessing many other viewers cant wait to see her either

[@KoiTimeUSA]

Great work guys... I love every episode that you guys put out. :)... May I suggest organizing your youtube homepage by project car? make playlist for each project?....

[@speedacademy]

+Tony Nguyen We have our videos organized by project car, maybe it's not being displayed like that?

[@KoiTimeUSA]

+Speed Academy ya. weird. it just shows recent videos updated. oh well awesome videos

[@poepeloerke2]

I wonder how good the Jenvey ITB's would work with a rotrex supercharger kit. I think it would have great throttle response for a FI engine (and I just love the idea of centrifugal superchargers).

[@Chilicharger665]

+Jelle Watch vids from owners of Rotrex cars. EVERYONE mentions how sharp the throttle response is. There is no lag whatsoever. While it would be cool, it is pointless if you are just after throttle response.

[@ilketama5982]

can you guys make a video about advantages and disadvantages about itb and also effect on fuel cosumption

[@speedacademy]

+ilke tama We'll talk about those on the dyno.

[@johngilmore7228]

Check the engine code. It's on a sticker on the front or stamped into the side of the block under the intake. If it's before serial #F20C 1102 5386, then you may want to consider upgrading the banjo bolts for the oil squirters in the engine. If not, tracked or forced induction S2k's could suffer from oil starvation. I don't know that it is proven, but it's worrisome enough that Honda apparently had a recall in Europe and changed the design. Would be a very cheap safety precaution. More info is here: www.s2ki.com/s2000/topic/102067-oil-bolt-install-w-pics/page__unlockUserAgent__1

[@Sodaexe]

excellent work even for german standard nerd fest dudes , keep it up guys!!

[@speedacademy]

+CA18DET249er Glad you like what we're doing.

[@rallyrat4098]

harry up! get to the dino!

[@arumrunner]

Hey guys, will you be at CSCS at Mos on the 15th?

[@speedacademy]

+arumrunner Doubtful but our schedule may change!

[@onyxmotorsports4755]

hell yeah!

[@edwinnathanael6855]

horray for you guys, vtec just kickin

[@Balo657]

Yeeeeesss, I want to hear that vtec goodness!!

[@speedacademy]

+Balo657 We can't wait either!