Spec-D - 2006-2007 Honda Accord Fog Lights Installation Video

[@huntlarry1]

yes, you either forgot to include the relay entirely and sourcing a high current, fused source for it OR you are crossing your fingers that the random accessory power you found will support 110 watts (near 10 amps). Either way, you need edit and fix.

[@tc96z1]

Larry Hunt I’m still searching for a video guide that addresses your comments. I’ll wire it straight from the battery with an in-line fuse before taking a ‘hit or miss’ approach.

[@scottpaisley5355]

Thanks for the great video. I wasn't installing fog lights but needed to remove the plastic panel under the dash and really found your portion of the video that addresses this as helpful. I couldn't find a video on it anywhere else. Not sure if you can edit your video and just put a clip on KZbin of that portion as I would think others would find it very helpful! Thanks again!

[@rmscotland]

Maybe I wasn't paying attention, but where did you put the relay?

[@1-800Pot-Head]

thats the button lol

[@HarryHilton123]

I got the ledin fog lights... if you look on Amazon you can see the wires it came with. Which wires go where please help as I dont want my car catching fire. Or to wire it the wrong way

[@ACarriere117]

2005 accord ex coupe 2.4 Question about the wires so the power wire will be the thickest white wire among the ignition cables, while the ACC power wire is the white wire with red stripe?

[@HarryHilton123]

Same car but mine is the 3.0. Is there a video on how to wire that properly

[@jhnonelikehim]

What is the difference in the white and red wire? Are they both suppose to be connected to the ACC power wire itself?

[@raulinazario9462]

No one ever answer you but I came here because I have the same question

[@foxxgait1252]

great video! i recently purchased a kit for my accord, but it did not come with an extension between the cabin and the engine bay. is there anywhere that i can purchase just that part? what is the name of that particular wire?

[@foxxgait1252]

+CARiD.com i have the fog light harness as well as the switch harness, but they are too far apart to be connected. the wires in the video seem to be the same as mine, however i am missing the red one that went from the cabin to the engine bay. i will contact my local honda dealer though, thank you

[@ianr94521]

you're fitting the foglights to an automatic. The grommet you run the wire thru in the firewall is used by the clutch in the manual V6 - there is no grommet there, it's a metal housing for the clutch rod. I can't find anywhere to run the wire from the switch to the engine compartment. Help!

[@keithbarton3360]

I did mine through where the hood latch cable comes in. It’s a lot of work. I took my left front fender off to have better access. My hands are too big to squeeze in.

[@elmasduro780]

did you connect the acc wire to the switch ?

[@kings_q5094]

When when you guys do one on an accord coupe 2008?

[@gregescobedo5713]

carid.com are u guys local in california. need help connecting my fog lights. I did the major work but need help with the electrical part.. thanks..

[@merrelljohnson]

Anybody got info on how to run the wires for a stick shift?

[@keithbarton3360]

I ran mine through the grommet for the hood latch release cable. It’s kinda a pain cuz I ended up taking my fender off to access.

[@MyRcGoSlow]

No relay ?

[@elmasduro780]

i need help my fog light is install from factory but i would like to turn on manual on or off when i want with the switch open but my question is how i make it turn on manual because right now with high beam it go off the fog

[@allisonjohnson1805]

Omg... what a pain! Thanks for showing though!

[@valeriyv1073]

That is a wrong installation! Accord has already acessory harness passed through the firewall, the place for fog lamp fuses in the under hood box, acessory connectors. It may depend on a model. Look for the genuine fog lamp kits and their installation instructions. Then the tuning fog lamps, much nicer and cheaper than original can be connected in the same way, using part of genuine harness, switch and relays, or making own similar harness.

[@vicktorzadrima8379]

Is that under the fuse box?also does it just connect pins to box?thanks

[@rmscotland]

Thank you so much. Very helpful

[@eliasduran4741]

3322×

[@valeriyv1073]

It should be something like that instead: www.handa-accessories.com/accord/03-2drfoglight.pdf The similar fog light harness can be easily made. Most importantly the accessory harness passing through the firewall and the place for fuses already exist.

[@HarryHilton123]

This link dont go to nothing

[@love4ver5568]

Can u tell me how to find exactly where is acc wire and power wire to connect

[@love4ver5568]

CARiD.com thank you very much