Wet Applying a LARGE 651 decal! Our store sign

[@nadaone82]

You may find it hard to take yourself back to the day you knew nothing. But put yourself in the place of someone knowing nothing. We are seeing you with the job completed. How much better it would have been to actually see you actually do this from start to finish.

[@Eiigy]

This is a life changer video! Thank you...

[@Eiigy]

Where did my comment go?

[@zapashoes3826]

I was trying to understand when the video going to start Thanks

[@karmadesigns]

What kind of writing instrument do you use to make your marks on the sign? Also I don't see the link to the medium tack transfer tape that you used. I went to your site but there are too many options to figure out.

[@SpeedyVinyl]

Sorry forgot to add the link www.speedyvinylshop.com/products/clear-medium-tack-transfer-tape-12x30-roll-free-shipping Also I use a dry erase marker or even a pen depending o the material i am applying it to. Alcohol will take more inks off of polycarbonate and other plastics. Just always check before you use it.

[@mrapma]

Tried this method on a door - design was two colors and I did the first color dry, then the wet technique for the second color and it's not sticking? The transfer tape is gunking up and still pulling the vinyl up. Doesn't seem to be drying... what should I do?

[@ciensuk]

Can we create "glass" with Oracal 651? I'd like to wrap my car roof with dry method. TIA

[@printswearshopbyjinky9533]

can you tell me what difference applying the vinyl wet?and dry?

[@BrandtFamily08]

That is not paper transfer tape is it? So can I use medium tack transfer tape with wet?

[@danbailey96]

Paper transfer tape is much better for wet applications .... It can be removed faster

[@lovely31bluprint]

You have thought me the wet method.

[@toaluasaleupolu7060]

Hi do you apply a laminate liquid paint over the sign after the vinyl dry?

[@kristajameson7527]

So is this what I would do to apply a 30 in by 48 inch decal to a construction trailer? How do I manage going over the little round bolt things?

[@SpeedyVinyl]

Yes. If you need to go over rivets you may want to consider using Oracal 751 or an equivalent. These will take heat and will conform better.

[@britniwakefield5202]

What type of backing did you us?

[@AndrewMurphy8383]

PLUS YOU STILL WANT TO DO THE WET METHOD WHEN YOU A LARGE DECAL ON A CAR AT TIMES

[@lswatson111304]

Hi, where would someone find the polycarbonate board?

[@pauldg2011]

Home Depot or a sign supply company.