SPEKTRUM DXS TRANSMITTER THINGS YOU NEED TO KNOW & SCRATCH AND DENT UMX TURBO TIMBER EVOLUTION

[@alfonsofernandez13]

Thank so much for your content it,s been so useful since I was given 2 used RC planes

[@judechopper]

Your a good reviewer and rc plane guy! This Aussie says cheers too ya mate!😊

[@billblumenthal4144]

We must be pretty close. Snowed in so I’m on the simulator in Nashville.

[@stevebarr9604]

Wow you did get some snow! We just got cold windy rain!

[@ramalho]

Hey Sean, I primarily fly Mode-1 but I also fly Mode-2 when test flying others' models or when instructing. So yes, I go both ways! LOL The primary difference with Mode-1 is that you are separating out the 2 main control surfaces to 2 different control sticks. With throttle on the right coupled with ailerons, a roll can be extremely precise since you avoid nudging any elevator movement during the maneuver. It's strictly an aileron roll. In Mode-2, there's a chance you'd feed in a little up or down elevator during the roll which will affect how smooth it was. You are using both hands to perform the maneuver instead of tying to input a diagonal motion with the right stick (if that made sense). Bottom line, your flying becomes very smooth with all the big aerobatic skills once you master Mode-1. It's made me a much better flyer.

[@stevebarr9604]

I need to get myself some of those little umx RC planes!

[@ItAintMeBabe99]

Love your videos, thanks. What is the difference between the AR637T and AR637TA receivers. I can’t find an explanation anywhere and there is no manuals specific to the 637TA.

[@joeg986]

Thanks Sean. Great help with the Timber.

[@nursingnurd1358]

I have a dxs transmitter from an aeroscout and tried to bind it to UMX tractor. It bound but cant fly, flaps are down like the one in your video and I cant even taxi it around. Im new to the hobby and cant find any help

[@gregmaggert8561]

Not sure if you figured it out yet but I'm at the 14-minute mark. The bind button operates the flaps. And they stay in the downward position. I'm waiting on my programming cable to hopefully fix this and switch the operation to another switch

[@loosein1]

Shawn, first your vids on forward programming is fantastic!! But a quick question on putting a ar631 in my glow 46 plane …… most of what I can find seem to lean towards it fine to do. Is there any special way I should mount the rx with regard to vibration etc ?? Thanks again look forward to your response

[@69gimmic]

I bought the same radio and converted to mode 2…looking forward to the stick conversion video…the only issue I found is that the sticks do not go back to center when switching….hope you can address that.

[@malatoke]

This is an easy adjustment. You take the back off and adjust a few screws. Spektrum has a video on it. kzbin.info/www/bejne/jHfTd3Vth96ggZo

[@rlbutterfield]

🍀🤞🏻I hope you can get your other channel over 1,000 subs.

[@gregmaggert8561]

Did you ever figure out the flaps on that transmitter?

[@flyingfurby]

One more closer to a thousand!!!

[@deano572]

Sean, could you please show how to bind the DXS transmitter so that SAFE is functional please? I was able to bind my Aeroscout DXS transmitter to my brand new Slow Ultra Stick easily and all the control surfaces work perfectly but I don’t have SAFE, and I definitely need safe. I bought the Aeroscout new in December and the SUS is brand new this week. I wasn’t able to check firmware version because I don’t have an update cable. Ordered and it’s on its way now though. Both planes have the same receiver AR630. Any help would be appreciated.

[@Tallguysrc]

I'm curious why you have a mode 1 radio? When mode 2 is the standard in the USA, also the 4 modes are mode 1 basic 4 channel plane like the AeroScout mode 2 is for a plane with Flaps, mode 3 and 4 are for wings and then you also have a helicopter mode, the real issue with the mode 1 radio is the throttle stick has the spring on the wrong side, you will need to change that also.

[@braddahl2098]

How is the range on the DXS?

[@Resq_U]

Many fun flights on this plane. Most if not all of the first shipments arrived with the rudder requiring adjustment. You'll enjoy this one in the local parking lot!

[@Jeroenvdb88]

Yeah, I just got one out of the box right now. The rudder did not work at first after setting up de D/R and Expo s according to the manual. Then I reset everything and started over. Now the rudder works but is skewed to the right... only if I put the trim to a 100 left it is in the middle... what should I do now?!

[@1964markw10]

I got one of those UMX's and my elevator was real warped..... and had the bubbles under the wing.

[@capnhardway]

I did get this wish my Aeroscout, Still have it for second, third transmitter.

[@TACOMAN2355]

Hi there 👋 that plane looks absolutely amazing 🤩 I ❤ it so much I just subbed to your other channel and I saw sadly it’s not at 1000k subs yet 😢 but $89 for that amazing plane is a steal!! I can’t believe you got it at that price 😊 I wish I caught that deal when it was available I want this plane so much as I’m just starting and I crashed my first plane which is now un able to fly😢 but once this plane goes on sale again I will try to buy it because right now I don’t have a plane to fly😢 anyways have a nice day 👍 I hope you’re other channel reaches 1000 subs so I can enter the giveaway for this plane🤩😎🤞❤

[@RobertKnapp-w7g]

From what I can tell you need to on plane profile 2 for the flip function to work. Hold the left trim up and the right trim down while turning on the transmitter. Use the left trim to change the Main led from orange (Heli) to Blue (plane). Then use the right trim to turn on the second smart led to the second led which is profile 2. kzbin.info/www/bejne/nWjMgJ6ZbZKdmpI Hope this helps as I seen this while doing some research before getting my first RC plane

[@malatoke]

You can also change the stick modes: kzbin.info/www/bejne/jHfTd3Vth96ggZo

[@capnhardway]

What's going on? You went silent, hope all is well..

[@kx4gamingandmodels123]

I gotta say man I hate when KZbinrs start a series but never finish them…. I just got into RC and bought a dxs, you have never finished your series. I need to know how to set up the rates on the 3 way switch. Really a bummer

[@robertklement5811]

The new UMX has a 3s battery, flys great

[@ricksharmonrichardson7651]

goodluck!

[@RatnaAkhtrr-c8q]

Hernandez Jeffrey Hall Shirley Williams Jennifer

[@tolyaulyanov]

Jackson Paul Williams Ruth White Larry

[@BarbaraGarcia-q2j]

Perez Lisa Lewis Helen Johnson Betty

[@RuthAsher-t4j]

Moore Laura Robinson George Robinson Carol