In this video Tom explains to our fellow RC enthusiasts how to setup a 3-Position switch for use with Dual Rates and Expo. The settings are just for demonstration, it is always recommended to consult your models manual for suggested travel and rate settings. For this demo we use the DX6e but the menu structure is virtually identical for each current gen Spektrum transmitter. Need help updating your transmitter? Update via SD Card - www.youtube.com/watch?v=Dp3mn... Update via USB Programmer Cable - kzbin.info/www/bejne/rHeWpYiriMhgmck Also we encourage you, the RC community, to give us suggestions on more quick hit tech tip videos! What do you need help with or what have you found fixed what you think could be a common mistake? Let us know! Thanks for watching!
@Frankx554 жыл бұрын
K in
@chippinfoo3 жыл бұрын
Why am I just now finding this? It's gold!
@SIDICOMP4 жыл бұрын
Thanks for the explanation, I bought a new DX8 remote and the explanation was very good. Keep giving explanations about the options it is very helpful. Thank you very much
@src29204 жыл бұрын
Hi Tom, how can I assign a 3-position switch for 3- Flight modes- No gains, AS3X only, SAFE On for eflite Viper. The manual only explains about SAFE select but not how to assign 3- Flight modes. That will be a great help. Thank you:)
@nufan45212 жыл бұрын
Thank you very much for this.
@garyvale83473 жыл бұрын
as a beginner I very much do appricate the Spectrum guys creating these types of helpful " how to " videos.....but having already set up my rudder, elev and alerion duel rates and expos on a 3 position switch of my DX6, before I watched this video......I never thought about manually changing that " curve " setting......and actually after watching this video I found his explanation of that " curve " setting to be a little confusing...... so now I am wondering if I did something wrong....can anyone help explain this ...thanks
@RCGDL Жыл бұрын
Thanks guys. I'm setting up an NX10 DR / Expo on switch C and I've managed to disable 2 of the switch positions (hash background for switch position) and I can't see how to re-enable them? Any help appreciated.
@f1matt3 жыл бұрын
Thanks!
@jeffs7915 Жыл бұрын
What exactly do you mean, having trouble with dual rates? They don't malfunction or default out when properly programmed, right?
@cjones44332 жыл бұрын
What do slashes mean across the middle box on ailerons?
@thomasjones33843 жыл бұрын
How do you setup a single 3- position switch for low rates for rudder, elevator and ailerons ?
@SpektrumRCvideos3 жыл бұрын
Where you select the switch, use that same switch for each control
@talkischeap74182 жыл бұрын
Quick question I will be assembling a few warbirds and I’m setting up my D/R and Expos on my Eflite P-47 Razorback, T-28 Trojan and P-51D Mustang all models are 1.2m. the set up for D/R are provided in the instructions but the Expos aren’t. Considering I’m a beginner pilot which expos would you suggest I set my expos at for High, Mid and lower Expos ?
@SpektrumRCvideos2 жыл бұрын
Hi Dev! For warbirds I normally go with 30% expo for high, 20% for mid and 10% for low. One of the things about expo is it is purely a user preference so you may find that those values are too high or low, and you can adjust them to your taste and flying style. Hope that helps!
@talkischeap74182 жыл бұрын
@@SpektrumRCvideos Thanks a million guys and yes I will make adjustments with the Rates and Expos accordingly just being safer then sorry 🏁💯
@georgespapillon3643 жыл бұрын
Hi, and thank you for these very instructive videos. I am setting up an E-Flight BNF Cirrus. How do you interpret the ailerons, rudder, and elevator specifications in the manual ? The dual rate for ailerons is 9 mm, and 25 mm. How do you transfer these values to my transmitter ?
@SpektrumRCvideos3 жыл бұрын
There should be a transmitter setup chart on the next page of the manual.
@georgespapillon3643 жыл бұрын
@@SpektrumRCvideos But they don't give the throw value for ailerons, rudder, and elevators in percentages.
@SpektrumRCvideos3 жыл бұрын
@@georgespapillon364 Which Cirrus? From what I can tell both online manuals give a suggested throw % and both say 100% for High and 70% for Low
@georgespapillon3643 жыл бұрын
@@SpektrumRCvideos You are right, my manual is missing two pages. So after your answer, I went online and saw the missing information, Thank you.
@richardcarre86254 жыл бұрын
Peut on avoir une traduction en français merci pour tout ses informations
@skinshrimp45942 жыл бұрын
My 3 wat switches won't work 3 way anymore please help
@SpektrumRCvideos2 жыл бұрын
There are some tips to help fix/prevent this in the video... Is there a particular part you are having trouble?
@skinshrimp45942 жыл бұрын
@@SpektrumRCvideos all of my 3 way switches suddenly stooped working in position 0. Now they act only as 2 ways. It happened to all my 3 ways. I have the dx6e
@brianlogan46103 жыл бұрын
I just ate up my new batteries trying to set these up !!! WTH am I doing wrong????
@Eagle444 жыл бұрын
Finished programming my dx6e for all 12 airplanes while sitting upon my throne 🙃