RUBY LIVES ONCE AGAIN!!! With A Secret Engine Never Intended For Her... *extremely spicy*

Shirts, Posters, Freedom, Bald Eagles, Stickers, Hats and more are available on our website! baldeagle.com/
Guess who's back... RUBY'S BACK!!! Brand new 427 with some nasty PRC heads from Texas Speed and Performance! Ruby's gonna be chasing down the Elco with this sucker...
Our 2021 Sponsors:
www.holley.com
texas-speed.com
www.motionraceworks.com
www.nittotire.com
www.summitracing.com
heatwavevisual.com
Check out our schedule for 2021 here - www.cleetusmcfarland.com/year...
Cleetus2 Channel - goo.gl/Ph2wyo
Holley's channel - / @placesholleypoops9094
**Social Media:
Instagram - goo.gl/LZvy5e
Facebook - goo.gl/gdwhh1

[@CleetusM]

Day 49 of asking Cleetus to put rocket boosters on Leroy and go to the moon

[@PreachedCloudz]

😎

[@darkwingduck7247]

@SpongeBob wow ❤

[@samljones]

You better do it, side by side moon wheelies with Kyle's MR2?

[@tonisara2950]

@SpongeBob 👍

[@muhammadjalal2335]

(◕ᴗ◕✿)

[@SloppyMechanics]

the humility is second to none with you three, never change

[@richardfitzwell6579]

My man!

[@FishinWithAlex]

@@wiawii I think he was talking about sloppy mechanics…

[@zzzxxzzz3248]

Bet they forget to put transmission fluid in like they did with mullet ! Actually diff fluid with mullet but close enough !

[@Only10re]

@@zzzxxzzz3248 oof

[@user-qz8ye9ij2n]

“Griffin”

[@adamscheelar9614]

Cleetus has missed the oil line for the turbo for almost every first start since the channel started

[@mattwilcox8134]

Pretty much tradition at this point. The first one he gets it right, the motor will probably blow

[@ryancrazy1]

every time he does a fire up after putting a turbo on, i think, "I wonder if he hooked the oil lines up...." thought he might have actually remembered this time

[@rhiley36]

no he remembered the last time they threw the engine together

[@adamscheelar9614]

@@rhiley36 okay then he remembers 1 out of every 10 first starts. Lol

[@mikeymasi]

Roman knows a thing or two about messing up oil lines and filters for first start 🤣

[@knox199181]

when u guys find cracks u should drill each end to prevent crack from reforming, pretty much removes the tear and gives it a edge to prevent further cracking.

[@thomgt4]

If you weld a crack you're completely melting the metal, not really much use in drilling the ends. Backing gas will be a lot more useful in preventing cracks

[@tripkushmob9232]

The face old cleeter made when he flipped the camera around while talking about George and the wires to jack stand Jimmy had me in tears honestly thats some good content can't wait to see ruby back at the track favorite car in the fleet

[@imacatnotaraccoon5656]

Dude we have all been there. That’s what made me laugh so hard

[@ianobrien3248]

Hey, we got the Jet Boat content to make up for any lost Sand Rail content, so I'm just excited to see Ruby get some Love! She's what brought me to the channel when you went to the auction and found that old truck motor in her. Crazy to see her now...

[@agnez______9956]

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZbin: This is fine Someone: Says "heck" KZbin: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾

[@jimmyellison2766]

same here that's what got me here

[@creativeusername4912]

I dont remember what brought me here I know I was here the day he bought Leroy

[@austinmiller8695]

Seriously!!!!!! 😎😎😎😎

[@donaldduck9493]

Jet boats in the sand dunes? Sounds like something WD would do tho.

[@noahmartin7734]

This is literally like the 3 rd time they’ve “learned” their lesson about not leaving ignite in the injectiors lmao this is why we fell in love with the channel guys keep on keepin on

[@nate0765]

And all the times they accidentally forgot to hookup the oil drain on turbos, he could've cut all that out. The fact that they can laugh stuff like that off and leave it in the video is why I love this channel.

[@michaelschwartz812]

Got that stupid money

[@ichoozjc]

And about a million loose bolts 🤣

[@mikeymerrett]

😂keep on keepin on hahahahaha

[@grantsdad177]

Ethanol is some nasty stuff that’s why you should typically use non ethanol in stuff that sits like small equipment, generators, boats, etc

[@iamdigbick4675]

I can't believe you let a squirrel loose underneath Ruby's Hood and it actually cleaned up the wiring instead of chewing it.

[@MarkVaughnLive]

Hahaha this.

[@chrishenry571]

This is one of those golden comments that is both precise and accurate. Well done, sir.

[@SloppyMechanics]

im a simple man, i see cleet video, i click like.

[@TheTheomax]

you and me both

[@theeturnone]

#MeToo

[@eriklarson9137]

HASHTAG

[@boxman116]

Jackstand "Its not a dam scramble button" haha Made my day. Cleetus just about pushed it through the Dash

[@patrickthomas3859]

I love Leroy and Mullet but Ruby sure has a special place in my heart. May be because Leroy is what brought me to the channel but I watched the Episode the day it came out they got Ruby. Kinda nostalgic.

[@scott9688]

If I could like your comment a 100 times I would...I'm not even a big car guy but for some reason Ruby took my heart!...

[@EdwardVarner]

Same, but don’t get me wrong I love Leroy too.

[@demigod4343]

kzbin.info/www/bejne/q52ViKyLd7pqjrM

[@rhadiem]

Same. Love Ruby but Leroy is still my fave. Needs some upgrades and tlc.

[@jacobkern9352]

Really missing the ruby and Leroy vids. 6 speed manual passes in Leroy are sick

[@kevinparker9932]

True that!

[@eriklarson9137]

*4 speed.

[@jantorep]

Please build Ruby and Leroy with Drysump pump this time. Im guessing some of the bearing damage is because of oil stavation due to high G Forces.

[@rustysausage69]

+1 to this

[@zachheath6821]

Cleetus might be partnered with Motion Raceworks, but he’s definitely keeping the lights on at Texas Speed 😂

[@timothywarehime5956]

I don't think they have a problem keeping the lights on down there. well, except when it snows.

[@zachheath6821]

@@timothywarehime5956 it was a joke, based on how much they send engines back and forth

[@pilwetty2061]

@@timothywarehime5956 damnnnn underrated comment award!

[@cobra02411]

"We had a meeting and decided to take weight off Ruby's nose... " Let me guess, that was Jackstand's suggestion...

[@ziiofswe]

His new name is Wheelstand.

[@ronalddebruin9009]

Finally an old fashioned build video. Need more like these. I was getting gills from all the boat videos

[@eriklarson9137]

Yeah. Cleet asked recently about what type of content we want. I would be more than happy with unedited, or minimally edited content with just George and Jackstand. I am a simple man. I mean, Cleet is the main dude, just saying Jimmy and Squirrel are plenty entertaining. Lol.

[@jaythecanuck4905]

Loved the nod to VGG "Intake Tightener Downer 9000" LOL!!

[@donovandunoff3335]

The time lapse song never gets old and I pray every night it never changes.

[@coryjones6983]

Me too brother

[@shopantics7325]

Same here!

[@agnez______9956]

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZbin: This is fine Someone: Says "heck" KZbin: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾

[@erickdunn8104]

Lol ...it's the worst for me haha. I fast forward straight through as soon as I hear it 🤣 😂 -takes all kinds to spin the world

[@BozoThaTroll]

Reminds me of southern rock from the 70's like skynyrd or almon brothers

[@TheBucklessYooper]

George fits in so well with you guys! So glad he's part of the crew.

[@garyhost354]

Yes I like the handsome Mexican guy

[@garyhost354]

@Erikk Hyndman the problem with Mexican is there is always some nuggets when you pull out. I think it’s the diet

[@jonathanmedina3522]

So thankful to see ruby getting much much much deserved love, she’s is the only one who doesn’t let us down! Put that love into Leroy! I’m an og here, I like mullet but our og cars need love!!!

[@austincooper566]

Forreal though!! When was the last time you seen neighbor?

[@theadventuresofthetates214]

George is definitely one of the best additions to the channel! He makes something that was already great, even better! Keep it up guys!

[@brianm6117]

Definitely get them brakes looked over. My friend had a chute failure yesterday and went through the sand trap at nearly 180 and hit the barrier fence. Thankfully he's okay, but the car has seen better days.

[@demigod4343]

kzbin.info/www/bejne/q52ViKyLd7pqjrM

[@Matty.Hill_87]

Good to hear your boy came out of it in one peace

[@ronniewilliz153]

Damn man. Did the sand trap slow him down at all. Glad he's alive tho.

[@GTO7005]

Sand traps suck been there done that myself

[@bryanmauser9993]

Y'all got any video of it?

[@thatautogarage3644]

Back purge with argon when welding stainless. The inside of the pipe will be “sugared” which is porosity and will cause failure again.

[@oscarbeltran9]

Tell that to Jeff lutz lol

[@joelfrancisco3798]

Learned that lesson when I didn't think it was a huge deal on a preturbo crossover pipe... Pretty sure that sugar broke off and destroyed my turbo exhaust wheel 500 miles later 😂😂

[@indemiks8777]

@@joelfrancisco3798 ooh very interesting possibility

[@ttv8ra23]

No good with old dirty carboned up exhaust pipe.

[@thatautogarage3644]

@@ttv8ra23 you are correct, I should’ve specified more but I hate typing on my phone. When they made this originally I don’t remember them purging the pipe. Working on ethical refineries taught me it’s the the smallest amount of “sugar” you have to cut it out and redo it to prevent ruptures/failures in the future.

[@Glasseh]

"With a secret engine never intended for her" Have Ruby ever had an engine intended for her?

[@Eric0991]

The worst thing that can happen to a brand new engine is to not start on the first try. Meanwhile cleetus: “Attempt number 13” 😂

[@erikj2015]

Not when its A full Roller

[@TreeOfLifeCG]

Normal stuff for him lol

[@Snarf_Le_Wombat]

I assume they primed the oil pump but yeah terrible

[@chrishenry571]

I'm just glad he left it in the video!

[@jeffreyclifton9928]

The chemistry.. The freaking chemistry. George is perfect for this channel.

[@julioabate]

Yeah he was definitely the odd ball at FP. He fits right at home at the Cleeter Factory

[@demigod4343]

kzbin.info/www/bejne/q52ViKyLd7pqjrM

[@eaglefan063]

watched you guys for years, absolutely love getting to watch yall living the dream. days might be long and hardships along the way but you've made something fantastic

[@Tenttackler]

I love seeing George so often! That man is national treasure!

[@TheMikeyDude1]

Right on! Ruby needs the engine more than any sand rail, and the hood going back on is the right call!

[@baddriversoflittlerock8359]

Not gonna be much of a hood. Will be interesting to see what they do.

[@ldnwholesale8552]

BUT they need far less engine hanging out the bonnet to start with. As a road racer we are not allowed any engine parts out of the bonnet. Far safer.

[@Sierra-024]

Ruby is coming to get her top spot back! We definitely need a "here's the situation guys" shirt. Or a shirt or a sticker that says "spicy supreme" with mullet in the backround!

[@HooptiesNHalftons]

I love how everybody forgot something and you all laugh and work through it!! Great work

[@altonb93]

Its always funny when that happens. Always little things and/or something everyone forgot about😂

[@phantom21629]

4:43 the engine isn't even in all the way and she's already pullin wheelies, Hell Yeah Brother!!!!

[@codylapoint]

I love that she finally is fixed, but what about the dry sump? Thought it was determined that the old motor starved for oil under deceleration / breaking down track.

[@QuantumLeap83]

They actually haven't figured that out yet, or have ignored comments about it in the past. I've definitely tried to call attention to it. There have been a lot of us commenting on it in past videos, Steve Morris even called Tom Bailey out for it on Drag Week. I think it was the same vid on Tom's channel where they visited John Forces shop, he described it in detail, Morris said its one of the most common engine failures due to driver error. Ya gotta go to free neutral on shut down or your bottom end is under massive load during its point of lowest oil pressure. Will eventually wipe out crank bearings. Hope they catch up before they spend more money needlessly.

[@rustler08]

@@QuantumLeap83 These men forget to hook up the oil drains almost every time, I foresee them not catching it.

[@jaytibby]

@@QuantumLeap83 they'll blow this new motor out also... Just a matter of time

[@EDesigns_FL]

Dry sump is definitely the best option, but even an Accusump would significantly improve the reliably of maintaining oil pressure. Repeating the same action and expecting a different outcome is a sure sign of insanity. I've lost count of the number of engines they've damaged from oil starvation.

[@stevepartridge75]

@@EDesigns_FL I think the same thing but not much ever said about Accusump anymore.

[@fnatomagan]

It's odd but after all these years of time lapse I never get tired of the music for it. 👍👍

[@c-dubmediallc4933]

That’s funny cuz I catch myself humming the tune without even hearing it lol

[@Elena-xl5dc]

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZbin: This is fine Someone: Says "heck" KZbin: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾

[@remcovanvliet3018]

You guys have no taste. That stupid fuckin song is the one and only thing on this channel I've come to hate with every fiber of my being.

[@collinwilson2776]

Farming Sim music🤣

[@c-dubmediallc4933]

@@remcovanvliet3018 I love all types of music. I didn’t say it was a great tune was just meaning it was catchy. And just shows how much I watch videos on the channel because it gets stuck in my head

[@Supportik]

You guys with james, an apocalypse could begin and you guys would be both still happy because you have your engines.

[@shadespots3076]

Yo cleeter thank you for being a wonderful example of how to take care of your team. It seems like everyone is always having a good time and enjoying the work they do. That doesn't happen with out a great leader. Thanks for doing what you do the adventures you take us on through youtube are amazing and have helped keep me sane through covid. Hope you get your sand rail project back on track. It will no doubt be another amazing adventure we get to live through you.

[@lou4LSU]

HELL YEA BROTHER from Louisiana haven’t had power or cell service in a week but we’re alive and no damage drove 20 mins to get enough bars to watch my favorite youtubers gonna enjoy this bit of normalcy

[@demigod4343]

kzbin.info/www/bejne/q52ViKyLd7pqjrM

[@GaryLX870D]

Hang in there buddy 🙏

[@markg1495]

God bless bro

[@junk3996]

"this shop is a geographical oddity. two weeks from everywhere!" - George

[@basoncivicsi]

He's Bonified!

[@Jonboy997]

I'm a dapper Dan man!

[@trevorsanchez2470]

Glad you guys finally got Ruby fired up!!!! She sounds great!!!! Can’t wait to see her back out at the track running them solid 7 second passes. Also I’m ready for some more Leroy content and the bald eagle machine content been awhile since we’ve seen any bald eagle machine content

[@mike.d.8]

I am so happy to see another engine install video!!! and 25 minutes too!!!!! the best combination!!!!

[@raythompson5920]

Glad that you added George to your team, his spontenaity is spot on!!

[@Just_In_credible6]

Yea he fits in much better with cleetus and james. He is a great addition to the channel and to the team.

[@STARSHIPTROOP]

NOTICE: we warned ya before, any engine that runs alcohol/methanol/ethanol (that sits alot) MUST be ran on gasoline before storage. You need to fab up a aluminum mini, hand carried tank (1/2 gal) complete with pump, fuel lines & mini 12v battery, ask any Indycar team to see theirs. Turn off the car's onboard pump while running this & have it connected to the engine's fuel rail. This will save you a ton of fueling issues.

[@Sharkey_t]

kinda hard to run a blown up engine on gas to flush the ethanol out.

[@STARSHIPTROOP]

@@Sharkey_t Mr Obvious might say no duh , but you still disassemble everything after you get back to the shop, especially concerning Toast running straight Meth

[@Sharkey_t]

@@STARSHIPTROOP methanol is a different story altogether. when i used to wrench on top alcohol stuff we used to drain the fuel at the end of everyday, pull all the fuel lines off, and fog the fuel pump and barrel valve with wd40. methanol has no sense of humor when it comes to corrosion. ethanol is a little more forgiving, depending on the gasoline content. with efi injectors its not enough to simply drain the fuel and let them drip out, if they are going to sit for a long time they should be put on an injector bench and flushed and flowed to ensure they are good when you need them.

[@STARSHIPTROOP]

@@Sharkey_t agreed, these guys haven't been around this stuff long enough to see what damage it can actually cause. its old wrenches like us to have to give them a heads up. they are not a pro team that has tons of procudures before they even hit the track. Asking them to buy a flow bench is a bit much but hopefully we can guide them to have the least amount of headaches.

[@octane613]

Who cares man. We're watching because of how these guys are, not because they're pros.

[@RickyVall3y]

Georgie’s energy is such a great addition to the channel!!

[@astroboy5456]

He reminds me of a young T-bag from Prison Break

[@thenovaguy7797]

This content is gold and so true to how things go sometimes. Great stuff guys.

[@spotifyseascapessmoothjazz]

You guys are truly inspiring. I've completed DIY projects that I wouldn't have taken on prior to watching this channel. Thank you!

[@squirtdaddy3428]

When I was in my early 20's if I could have EVER gotten an engine to start on only the 13th try, I would have been very happy. My early builds if one started in under 40 attempts, I started getting cocky. This was way back before computer engines, when it was all trial and lots of error.

[@n1umj]

I remember being that way. lol

[@rustysausage69]

computers make it easy. but theres nothing like the satisfaction of making a carburetor work properly

[@huntersowers2799]

One of the things that makes this channel so great is the fact that you very very rarely bring up haters. Pretty cool how you just do what you do without giving a damn what some say 🤙🏻

[@notold37]

Had the headphones in and it was music to my ears to hear Ruby fire up, great work guys, nice to see Ruby getting her heart back in 👍🏼👍🏼👍🏼👍🏼🇦🇺🇦🇺🇦🇺🇦🇺🦘🦘🦘🦘

[@Re1ikGaming]

Air, fuel, and spark....one out of three ain't bad!

[@ryleyh1185]

11:55 "You are stronger than you look on KZbin." George with the zingers lol.

[@boltonky]

Glad to see her coming back together, and i am a back-purge kinda guy if tig welding manifolds etc but its cost and time. Keep up the hard work which we know you will

[@BUNKERJR53]

Welcome back Ruby. Great job George. You are definitely a great addition to the crew.

[@BPoutdoors135]

Just got done watching one of the other vids with my grandpa. Love the vids man keep up the good work.

[@BPoutdoors135]

@SpongeBob get your bull crap stuff out of here

[@agnez______9956]

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZbin: This is fine Someone: Says "heck" KZbin: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾

[@mikkei3532]

PUT inside now a dry sump man - it prewents bearing problem all at once

[@UxioGrindYourMind]

Love to see mechanical action back on the channel, you really listen to us! 🤘🤘🤘

[@bbhunter2220]

Holy shit. . A shop video!!! It’s been years. It’s about time you make a video that the og subscribers wanted to see.

[@jakesmall3454]

Ruby getting the love that she deserves. The new headlights really make a difference

[@Keirdo69r]

Been wanting them to get new headlights for soooo long! Makes such a difference 👌🏻

[@cpmxxx86]

I’ll take Ruby over a funco buggy. Although that video of the wheelie turn was sick.

[@demigod4343]

kzbin.info/www/bejne/q52ViKyLd7pqjrM

[@anthonyestevez118]

Superb! Great to see Ruby back! Thanks for sharing!

[@jaypop7385]

I just wish I could spend a day in that shop with you guys and watch you work and just have such a good time with one another! You can see how genuinely you guys all get along and care for one another and just hanging out building incredible cars together!!!

[@mrmotofy]

Create your own group to do the same...BE that friend people enjoy having around...don't wish to be in someone else's world it will never happen

[@Apokalypsos81]

Finally can see the boys working again! Missed that kinda content!

[@msmith_364]

Cleetus making adult life choices to grow the business is an amazing thing to see coming from doing turbo whistles in the exhaust to now

[@zdub4124]

I have been craving ruby, Leroy, and elco content. Keep em coming please. Is why I watch!

[@rpmevo8]

All prior drama aside.....Georgie is ONE HELLUVA rounded mechanic and an absolute asset to the team!!! Together with Jackstand and all bases are covered. Seems he's really shining and settled into his new position. One liners still ON POINT!!

[@369motoman]

When welding cracks always take a small drill bit and drill a hole at the end of the crack to relieve the stress or it will crack again and further 👍

[@mayshack]

This crack was formed at a weld because there wasn't good penetration. It's different from a casting, for example, like you mentioned where you have to drill the ends of the crack to keep it from spreading. Even with drilled holes at the weld crack, it is guaranteed to crack again in a different spot because the weld was poor. To fix this properly you'd have to reweld the whole joint, not just patching cracks and pinholes.

[@remcovanvliet3018]

Yup. And rig up something to vibrate the work piece while you weld. Greatly reduces stresses in the metal and helps prevent warping and cracking.

[@369motoman]

@@mayshack I agree it needs redone, the patch will last a little longer if drilled. I'm a certified welder and a farmer, sometimes you gotta fix it down and dirty then repair it properly later

[@MJTAUTOMOTIVE]

It needs a brace that is bolted to the engine to support the turbo. That is a lot of weight hanging off that pipe especially during a run when the pipe is red hot. And the crack should of been v notched before being welded. And back purged. The crack probably started on the inside where the weld was contaminated.

[@ggss1176]

That turbo manifold repair very sketch...will crack again v soon

[@alexharshman7025]

Im so ready for some Leroy content, fingers are crossed all goes well

[@robblankert7889]

The jetboats and other stuf is cool to watch but this content is why i am following this channal for years now. Nice to see Ruby put back together!!

[@user-hj1om6yu4z]

YO, I MADE YOUR PISTONS!! I'm an employee at wiseco, in mentor ohio! Anytime you're near Cleveland, come east about 20 mins and take a tour!! You can watch the aluminum slugs get punched into pistons and the whole process.

[@lvett8647]

Love having George around, good choice to bring him on when the chance came up. Glad to see ruby coming back also!

[@agnez______9956]

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZbin: This is fine Someone: Says "heck" KZbin: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾

[@Diffarn]

Really missed this kind of content since the channel got big, hope to see more :)

[@finhappygrower8400]

Hell yeah brother!!! I love ruby im so glad she's back! Can wait to see some rips

[@wideslammer]

It's good to see a decision made to invest in something that is likely to grow in value (Motion Raceworks) than another of your many toys (sand rail). I realize that this channel has as one of its primary purposes to entertain us, but you should also think about the long term. No disrespect intended by this comment.

[@eriklarson9137]

Good thing you left that comment. I don't think ole Cleet could do it without you.

[@JimJamScadoot]

@@eriklarson9137 Don't be that guy.

[@Jake-ev1ju]

@@JimJamScadoot Erik is that guy though..

[@eriklarson9137]

@@Jake-ev1ju I yam what I yam. Meh.

[@thejmoneyshow]

Everyday I see George, is a day I smile.

[@aaronwattam7420]

What happened to George working with Jeremy?

[@koltondilly9513]

@@aaronwattam7420 I’m wondering the same thing

[@thejmoneyshow]

@@aaronwattam7420 Just switched just to work with the big boys

[@jonkeau5155]

George was a GREAT addition to the channel! Kinda like Kyle hiring Wyatt and suddenly all his half assed projects start getting done top notch…

[@taranhunter3147]

I wanna work on race cars like these for a living one day, so these are definitely my favorite videos. I love to see the work behind these units!

[@braydonbroome7473]

I swear I could listen to the time lapse song they use and do nothing but smile. Everytime i hear it I know it’s this channel that comes to mind and it provides an escape.

[@Weird600]

You guys really need to send those turbo exhaust housings out to get JetHot done to them... A nice silver coating will make them look great!!!

[@Axial32]

Or even the black jethot coating

[@GolfingwithGrant]

They should have ty weld up real nice ones for them. Then do that😂

[@vandersgarage4682]

@@GolfingwithGrant Fab up a turbo exhaust housing?....lol

[@johnappleseed936]

@@GolfingwithGrant found the casual

[@tezzrterry7485]

Gotta protect John Force's fingers too.

[@presnell25]

Omg I love y’all, just true dudes . Showing true moments. Why I fell in love with Kyle (boosted bois) and this channel. Been watching since the parking lot Camaro video

[@dewaynerink7393]

The kinda content I miss, and am glad to see!

[@nx2kdet]

I have the same FIC injectors, let it sit over winter and they were so clogged from the ethanol and humid environment i live in. Lesson learned. Glad ruby is back.

[@StepHire16]

Loving the Valvoline hood in the engine room. Being an old school Mark Martin fan. Definitely cracked a grin seeing it.

[@Sharkey_t]

Might be worthwhile to get an injector tester/cleaner for the shop. while its ideal to drain the fuel and run it on pump gas, its not always an option.

[@markheischman672]

I missed this type of content. I love these videos!!! Try to do more of them? See you guys at LS fest!!!

[@gd1996]

Along with drag racing, definitely my favorite kind of content from this channel.

[@billnalder1017]

Well i can FINALLY sleep tonight!!!...Replacing those headlight covers were the bomb!!!...i was about ready to fly 3000 miles just to do a buff and polish on Rubys old covers!!!..."CANCEL MY FLIGHT HONEY"!!

[@ichicken5052]

i love george being on the team now. Hes such a good fit.

[@dirtydoge756]

I like Georgie too, but I feel like his cracks are showing. Jeremy did a good job of hiding them because Jeremy doesn't want anyone to be shamed, but Cleeter and Jackstand will put him or anyone else on blast the second they do something dumb lmao

[@arranwoollett6453]

I’m so glad your doing some drag stuff again with the og’s that’s why I started watching this especially with LeRoy

[@davidblanck4131]

That hole on the offshoot crack was actually a good thing. You prevented the chances of it growing exponentially.

[@mcmillan1963]

Great job on diagnostics. BTW, the starter had more run time than the TS 427.

[@WhiteManXRP]

its all good, simple mistakes, and minor issues are all part of it.. aint nothing but a thang... good job guys, good to have Georgie on the channel Cleet, glad you put him to work, what a great, humble, true American team...great to see camaraderie between the boys 👍🤘

[@chrs-kr8kc]

man those valve covers are amazing,Love cletus God bless yall and ya family my man

[@ivedonedidit]

Watching a Ruby video after all this time warms the heart

[@_NTHN_]

that sand rail looks so sick. would love to see that ripping in the dunes with kyles little j series sand rail and all the side by sides haha either way keep up the good work cleet

[@User-sz2bg]

It has to happen

[@brx3649]

Rubes deserved those spiffy headlights

[@based_will]

Loving the shop content Cleet. Stoked to see ruby fire back up

[@canadianwolf6582]

About time you changed Ruby s lights she deserves all the love your given her with them upgrades two thumbs up love channel your on my bucket list I wanna visit the F F

[@williamr8516]

Man ruby would look so killer with some aftermarket headlights

[@agnez______9956]

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZbin: This is fine Someone: Says "heck" KZbin: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾

[@lou4LSU]

HELL YEA BROTHER. I’m in Louisiana and haven’t had lights or cell service for a week but we’re alive and no damage drove 20 mins to get enough bars to catch up on my favorite youtubers gonna enjoy this bit of normalcy.

[@scottsmith5623]

Prayers for all of y’all holed up down south….

[@leemast4010]

Stay safe!!!

[@agnez______9956]

AISURU.TOKYO/AGNEZ 💞 (◍•ᴗ•◍)✧*。18 years and over KZbin: This is fine Someone: Says "heck" KZbin: Be gone #однако #я #люблю #таких #рыбаков #Интересно #забавно #девушка #смешная #垃圾

[@willwagner6337]

You guys are absolutely hilarious to watch. You’ve come so far! Totally gives me Top Gear Vibes

[@Quickbeam_]

i know you guys cant always do this style of video, however it was a great watch, thanks for the entertainment