Great info and explanation! Thank you for sharing! So excited to explore the world of nitrous, and wouldn't dare try without Induction Solutions/Steve Johnson and his crew! Unparalleled in support and service.
@thomasturner77214 ай бұрын
I have an induction solution kit on my car. I went from 6.75 1/8 mile on motor to 6.11 1/8 mile on a 150 shot. I have the Holey Moley kit.
@rivercitymusclecars4 ай бұрын
Good plate system. Yeah. My car picked up a 1/2 second on a 150. I was very satisfied with IS
@ronnietippett1075 Жыл бұрын
Great video and real world tech thanks
@machocrx2 жыл бұрын
Great video 📹
@ronnietippett1075 Жыл бұрын
Great video
@Family_Ties_Racing2 жыл бұрын
Keep the vids coming!
@jrsgarage3244 Жыл бұрын
Atomizing the fuel, nitrous cuts fuel up, cools it to densor charge, my take 👍
@dougcrosby6994 Жыл бұрын
What? No softened chambers in the heads? No better exhaust valves? Overall, great info bud!! I've been building, tuning, spraying and refilling nitrous for damn near 30 years. SJ is a great source as is Nitrous Supply (Mike Thermos). Most of the common companies offer "flowing and custom tuning" as well but an independent opinion is always good. Keep the vids comin!!
@rivercitymusclecars Жыл бұрын
Yea sir I tried to mention as much as possible in a 15 min video. So I really was trying to hit the high notes. But yes softening chambers and iconel valves really help the motor live.
@tracykouns490311 ай бұрын
I had fast lane flow the direct port I got a 30 page book with all kinds of different fuel ratios
@rivercitymusclecars11 ай бұрын
Good money spent
@drewcrabtree9607 Жыл бұрын
What's the setup for your car love the nitrous video!
@rivercitymusclecars Жыл бұрын
It was a 434 sb. Bullet nitrous cam. Afr 220 renegade heads. Ross forged pistons. Eagle crank. Crower rods. Wilson intake. AED 950 carb. Msd grid. NX max 4 controller. Nitrous outlet stinger 3 plate BP ans flowed by induction solutions. Rossler terminator 2 glide. Neal chance converter.
@dr.keegan5303 Жыл бұрын
He was so busy installing nitrous he didn’t even have time to finish the drywall in the shop. Lol
@michaelclanton11524 ай бұрын
How much timing would you pull out of a 200hp kit? Roughly lol
@rivercitymusclecars4 ай бұрын
On my old set up I pulled 7 degrees with 200 hp. Just depends on fuel. Set up. Plug heat range. Ect…….
@BrandonWillis-kf5zm11 ай бұрын
Charlie Murphy 😂
@rivercitymusclecars11 ай бұрын
RIP! 😂. He was a legend
@Stevesbe Жыл бұрын
If it starts popping and missing just change to a bigger nitrous jet
@dustinmintz9788 Жыл бұрын
I would be interested to know where to send my info to get tune ups for nitrous.
@rivercitymusclecars Жыл бұрын
Steve Johnson @ induction solutions
@dustinmintz9788 Жыл бұрын
@@rivercitymusclecars thanks!
@loriclark230 Жыл бұрын
do youthink the nitrous can tell which fuel it is burning..great steve johnson commercial..
@rivercitymusclecars Жыл бұрын
Steve Johnson and induction solutions are a great company with tons/decades of knowledge. He helped me greatly in my program. Nitrous Dont care about what fuel is burning but the engine will if it goes lean for some reason lack of octane or to much timing will burn it up. I posted a video about my experience with that so make sure your careful
@melissamcallister2867 Жыл бұрын
The biggest thing you never mentioned is timing
@rivercitymusclecars Жыл бұрын
I have always followed Steve Johnson timing recommendations
@infamousnova Жыл бұрын
@@rivercitymusclecars what were his recommendations for you
@rivercitymusclecars Жыл бұрын
@@infamousnova each tune up, set up, everything will be different. All depends on combo. Fuel. Ect……. His tune up will be custom to your set up
@infamousnova Жыл бұрын
@@rivercitymusclecars yea I know, just wanted a idea. So what's your timing
@rivercitymusclecars Жыл бұрын
@@infamousnova I was at 24 degrees 7psi fuel pressure in the stand alone with c23