Here's a full look at how to swap scales on a Spyderco Manix 2! The scales featured can be purchased below: appliedweaponstech.com/t/spyd... Subscribe to join on the journey! Plenty more to come!
Пікірлер: 57
@R.H.bladeNshade4 ай бұрын
One of the smoothest disassembly and reassembly that i have seen. Thank you sir.
@olbubs4 ай бұрын
You are most welcome, thank you for watching!
@d.b.995111 ай бұрын
Always a pleasure watching the business with ol bubs.
@olbubs11 ай бұрын
Thanks for watching! Glad you enjoyed!
@stephenjohnson30848 ай бұрын
Man that looks nice! I have the xl manix and ordered so new g10 scales for it, Been loving the 4v Mini sheepdog so thx again! Great video
@olbubs8 ай бұрын
Thanks for watching! Glad you enjoyed! Also glad you are enjoying the mini sheepdog!
@markanderson867710 ай бұрын
I just picked up a set of Metonboss titanium scales and am looking forward to changing them out. This was helpful - thanks!
@olbubs10 ай бұрын
Awesome! Glad it helped, thanks for watching and have a great time on your build!
@dukx79147 ай бұрын
The way u explain every step in such a way where there is no dough that people could mess up is great 👍. Thanks, i wanna customize my manix 2 now.
@olbubs7 ай бұрын
Thanks for watching, I’m glad you enjoyed, the Manix is awesome to swap scales on. Hope you go for it, and enjoy!
@MikeyTrailz10 ай бұрын
Ive always wondered what that AWT sticker was that i have haha The purple is soooo fire 🔥
@olbubs10 ай бұрын
They did a great job on these scales! Thanks for watching!
@flipflat48147 ай бұрын
I just got a standard all black manix 2 the other day and was worried about the blade being off centered, thank God it was absolutely perfect 👍. I've heard so many complaints of slightly off centered Spyderco's on KZbin that I figured I would get one also 🤷. I was also anticipating a very long break in period for it to drop shut without encouragement, to my surprise it fell shut with a triple bounce back first time 👍. I guess i got lucky or something 🤷👍.
@olbubs7 ай бұрын
Thanks for watching! Glad you got a superb Manix out of the gate!
@matthewofriel56835 ай бұрын
I got a og Manix two with g10 scales just did it on my own and added bronze scales to it. Omg it’s nice
@BluetoothBlades7 ай бұрын
Very nice mod, I've done mine several times...even did a blade swap. Ummmm...by the way, you caught a 🐀 too...might wanna take care of that😊
@olbubs7 ай бұрын
Time to empty out the traps again!! Thanks for watching!
@mauriciohzamora41053 ай бұрын
Thank you so much for your video, mate. Crystal clear content. Please provide a link to that mat/pad you are using. Cheers
@olbubs3 ай бұрын
Glad you enjoyed!! Here's a link! www.bladehq.com/item--Blade-HQ-Silicone-Knife-Takedown--117092
@AMBOSHER3 ай бұрын
You should get that backspacer cerakoted green.
@olbubs3 ай бұрын
That would be super cool indeed!
@BrandonGavin_EDC6 ай бұрын
I wanna do a Cru-Wear Manix build with some AWT scales. These scales are so awesome! Exact ones I want. I love the purple. I wanna do a Joker build with green Titanium accents.
@olbubs6 ай бұрын
That sounds awesome! Thanks for watching!
@tonydillinger25537 ай бұрын
Can we put sizzle sauce on the new manix 2 lightweight that comes with screws?
@olbubs7 ай бұрын
Sizzle sauce options are less abundant for the LW models. You can absolutely dye the scales as desired, but they do have some incompatible parts. You might be able to buy a replacement ball cage like I have and a spring and have it work but I’m not certain because the LW has an additional piece outside of the washers that nest into the FRN. I haven’t scoured the internet though for a scale set made for the LW but it exists for the Para 3 so I wouldn’t be surprised if folks are making them or working on them.
@ToRo909r8 ай бұрын
Just curious. What was the point of taking the other scales apart from the lanyard barrel. I didn’t see you use any of those parts again. Couldn’t you have just left them together?
@olbubs8 ай бұрын
Hey thanks for watching! The point is to show people how to do a scale swap on a Manix. Most aftermarket scales require reusing the liners. My aim is to make the video helpful to folks even if they don’t have liner delete scales and new hardware. If you get these scales, you can definitely just leave the scales and liners together.
@ToRo909r8 ай бұрын
@@olbubs ok thanks, I’m aiming to buy the AWT which are liner delete. I’ve never changed scales on a Manix. Hopefully the ball or spring don’t go flying 😂
@olbubs8 ай бұрын
@@ToRo909r it’s not too bad, keeping the ball in the cage is the most finicky part. I believe in you! 🤣
@not-a-raccoon11 ай бұрын
I actually like the Manix better than the pm2. The tip is a bit stronger and it isnt as much of a pocket hog. I'll have to try this. Though getting scales shipped to Norway after i move there next week could be a problem 🤔
@olbubs11 ай бұрын
Wow that’s a big move!! Exciting stuff man!
@CNYKnifeNut11 ай бұрын
I'm in Sweden half the year, most years, and have never had any trouble getting any aftermarket parts shipped to me there.
@not-a-raccoon11 ай бұрын
@@CNYKnifeNut great to know, thanks! I did run into a problem with Original Goat for scales for my Hogue Deka. They don't ship international apparently. But hopefully they will soon.
@BPF80MCar-vi1pg7 ай бұрын
Maix is superior to pm2
@Ryan.S9243 ай бұрын
the oil in the aftermarket world is probably MUCH better than what theyre using in the factory
@olbubs3 ай бұрын
Absolutely! Thanks for watching!
@mattrc776 ай бұрын
Has the shininess worn off on it at all?
@olbubs6 ай бұрын
It hasn’t yet, but I have a pretty large rotation of knives I carry. Thanks for watching!
@jayhawk7036 ай бұрын
Do these scales work on the lightweight?
@olbubs6 ай бұрын
Thanks for watching, unfortunately they do not. I think a person with some fab skills or extra parts could make it work, but they are not a direct replacement for the LW.
@Ryan.S9243 ай бұрын
anyone know where you can buy an extra set of bronze washers for the manix 2?
@olbubs3 ай бұрын
appliedweaponstech.com/replacement-pivot-washers/
@Ryan.S9243 ай бұрын
Duuuude. Ty
@Ryan.S9243 ай бұрын
I’m converting my LW to G10 and Liners. I do not care for the LW at all
@olbubs3 ай бұрын
@@Ryan.S924 totally get that!
@Ryan.S9243 ай бұрын
Would you happen to know what size bearings one would order if they wanted to try to put bearings on the Manix instead of washers? Someone told me about a company called Skiffs or something like that but in order to buy some you have to know the exact size ID and OD and how many bearings. Anyone tried this?
@andresm90923 ай бұрын
Do you still have the green scales you took off? Would u sell them?
@olbubs3 ай бұрын
Thanks for watching, I sent you a follow up on the short with the sane comment. Take care!
@andresm90923 ай бұрын
Awesome just shot you a email thanks for the response appreciate it
@andresm90923 ай бұрын
@@olbubsshot you a reply on these scales 🙏🏻
@olbubs3 ай бұрын
@@andresm9092 hey man, my reply may be going to your spam folder or something. I've replied to both of your last emails. My counter offer is lower than what you proposed! I want to get them sent off to you. Let me know here if you can't find the emails I sent you and we'll figure something else out.
@andresm90923 ай бұрын
@@olbubs sounds good thank you!
@user-vy7tk2il3t11 ай бұрын
Супер😁👍
@olbubs11 ай бұрын
Thanks for watching!
@everythingsharpАй бұрын
You want to sell those green g10 scales??
@olbubsАй бұрын
I already sold them to another viewer! Thanks for asking!