Star Wars Rogue One Shore Trooper Helmet (3d printed)

[@KicstarV]

Finished my exams. had not seen any star wars yet!! Download all 7 episode to watch and get ready for rogue one. yeah!!!😉

[@monophonoise4548]

Kicstar V watch Rogue One first, and then watch the other episode. you will get it.

[@MW3TIM]

Kicstar V Enjoy it!

[@femkevdw8369]

Kicstar V you should watch it in the order: episode 1,2,3,rogue one, 4,5,6,7

[@femkevdw8369]

Event Horizon thats not the chronological order of the story though it should be 123 (origin or Darth Vader and everything), rogue one (they get the blue prints), 456 (rebellion after they get the blueprints), 7 (and 89 coming out later)

[@femkevdw8369]

Event Horizon I see where you get it from, but i always prefer the chronological order

[@nerd_world8919]

this is actually really good and one of my favorite things that i've seen 3d printed

[@verdatum]

Fellow propmaker here, this is one of the best projects I've seen you do yet. You're really tempting me to finally get around to upping my CAD skills. I'm seeing a lot of advantages of doing a print over molding and casting a sculpt; especially for one-off props.

[@AnimeWars2002]

And of course you could stop at an earlier point and mold and cast if you didn't want to go through printing and cleaning it up. Also give you chance to use a superior material.

[@lil_vault_boy]

verdatum If your a prop maker...... I'd like a Samus helmet master chief helmet soldier 76 gloves jacket and face mask Boba and mango fett helmet along with a pilot helmet from Titan fall.Whats the total cost?

[@verdatum]

I LOVE YOU Personally, I don't do sewing projects like the Soldier jacket; I'd outsource that. I have no idea who "Mango fett" is, so I'm leaving that out. Depending on the design, there's a very good chance you'll be blind while wearing the Titanfall helmet. Presuming you want Hollywood-film quality dead-on realism, I'd give a ballpark estimate of about $30k, not including licensing issues, of course.

[@lil_vault_boy]

verdatum Lmao I put "mangofett" .Nah but it was a joke.But if I wear to try and get these I wouldn't go for dead on realism.Going for dead on realism would be too pricey and unneeded.Instead a simple version of it with out the colors would be fine enough as any body can get tape and spray paint the object.I find it kind of funny that you took this as a order.Although I do like the fact that you were very professional in terms of responding to my comment.

[@taxavoider9889]

If I owned something like that I'd never take it off

[@lovebirdmic]

I end up getting the helmet all smelly due to bad breath -.- So, I think IF I make something it'll be a rebel helmet. Like on endor. So it wont cover my face and such.

[@proseiben3358]

lovebird mic Brush your teeth, are you a caveman?

[@samuelmayr9796]

Trust me, you will hahaha

[@Daidalos69]

This is the way

[@ziospoletta7482]

this is the way!

[@acledfloyd]

This is a reminder that you wanted to make the whole armor. I'd love to see you make it.

[@aarontena]

The question is: Can you aim with it?

[@boonkiousgangulous8221]

of course not are you mad

[@aarontena]

Oh I thought you could. That would have broken the laws of the universe.

[@blueawesomedinosaur]

I don't think it would be good sights for a weapon.

[@edwinng4610]

No

[@Kaiser7068]

Well… shore troopers in rogue one had a pretty good aim

[@Artismia]

Absolutely wonderful!!! The project, process, video, and your enthusiasm, all inspiring and a pleasure to watch!

[@jimmydiresta]

Wow !!

[@davestrain1762]

Wow Also! BTW Seen it... It's Awesome!

[@Aubble]

Hi diresta :D I love your vids

[@beautifulbeaner]

W OMEGALUL W

[@michaelkerr9682]

Nice! You should do the "Mandolarion Helmut as well.

[@RowdyBrian17]

That's some damn good spelling right there

[@yeboy6020]

i agree

[@General4nubis]

@@RowdyBrian17 username checks out

[@crappiegamer2341]

There is a build in KZbin that’s really good

[@yeboy6020]

@@crappiegamer2341 what is it of?

[@caitlinV3]

Holy smokes! That's amazing. Your work is inspring.

[@ilovenarwhalies]

This video and your helmet are the best things ever. I have a 3D printer that I have not been using to its full potential and you inspire me to be a better maker!

[@Iliketomakestuff]

That's awesome to hear, thank you!!

[@imperialrecker7111]

boi wat u doing in ur life 3d printer is a thing that i always wanted in my life.

[@JayBates]

Favorite project that you ever made: confirmed.

[@Iliketomakestuff]

:)

[@mdbohica]

Bob...That's badass. Amazing work!! Great job!!

[@Iliketomakestuff]

Thanks Josh!

[@hievenhade7545]

I´m very interested to do this in my free time when I am older... I just dream of a Death Trooper costume in a quality like this xD

[@notreal8699]

i will remind you...

[@wiyao8164]

There your older now

[@Nakamax.]

You also might like a Captain Rex's Storm trooper armor set. Captain Rex was an original and is very good with blasters, mini guns, etc. He was also one of Jedi Anakin's Trainers before he switched sides and became darthvader and then get absolutely obliterated.

[@TheLegodinosaur]

Did you do it yet?

[@waldvogelreview7755]

Rogue One was an amazing star wars addition Great Job !

[@vasili1207]

Pro tip if you want correct colours ... 99% use ww2 German RlM colours of the Luftwaffe and panzer divisions , all the empires colours are based on this , since rouge one is empire cannot go wrong

[@lmcriminals]

The official color is Sahara Beige

[@arcticfoam5480]

Rogue one was by far one of the best movies I had ever seen, and I love the helmet, maybe you should try other Star Wars helmets? Like Captain Rexs' helmet, or a shadow trooper hemet

[@Sullendust]

The assembly of the 3d printed parts is so satisfying to watch. Awesome job!

[@floopusdoopus]

I’ve been assembling a Scout Trooper helmet for the past few months and I’ve learned so much on what NOT to do. This really helped to learn

[@NitrousDiecast]

I'm not a big Star Wars fan, but this looks really good!

[@abnormaalz]

Hotwheels Dd same lol

[@Shrew-22O1]

Hotwheels Dd same..

[@jamesbarrett1614]

This is great!! I'd love to see you do more of these. Maybe the Death Trooper or Boba Fett!

[@Iliketomakestuff]

I probably will at some point, as long as I can make sure that the videos offer some new info for people to learn. Thanks!

[@TheBenjaman]

if I just had a 3d printer.....

[@Lellba47]

you can still do helmets out of foam! There's a very good explanation on these on Tested :D

[@TheBenjaman]

Lellba47 yeah I know, i've seen some amazinf foam helmets and stuff

[@jabbahammahummus2887]

If youre looking for a cheap printer, try the anet a8 from GearBest. it's 150 bucks and ships worldwide.

[@Videogametourist]

Look into the Anet A8, cheap printer that brings surprising results.

[@jasenwills590]

That's surely not big enough to make a helmet of this size though right

[@ThePowerchimp]

The dark edging gives it a Borderlands vibe! Great work.

[@nolaehan922]

It looks REALLY clean!

[@DaedalusProps]

Rogue One spoiler: PEWPEWPEWPEW BOOM! POW *robot noises*

[@Iliketomakestuff]

Awww man.. you gave away the ending!!!! ;)

[@DaedalusProps]

I Like To Make Stuff i'm a bastard like that LOL By the way, love the channel. I saw the life casting videos that you did with Bill, he's pretty great LOL

[@HelloKitty-sd9vs]

@I Like To Make Stuff lol 😂 I never saw it cuz I don’t like StarWars hehe

[@zwartepjotr2865]

pleas make the armor it would be so cool

[@femkevdw8369]

zwartepeter69 that would take ages

[@EctoGamer]

zwartepeter69 it would take 2 years with 1 printer

[@JHA854]

Leave it in the desert for a few weeks to weather it even more haha

[@rakdos91]

practical effects taken to the next level

[@torbenfickerich9745]

dude that haha in you sentence is super poor

[@chelsieelder7473]

f**k. u

[@panther2906]

Chelsie Elder fuck you too

[@RyanTerry]

I think I had a smile on my face the entire time I watched this. Fantastic job, Bob!

[@Iliketomakestuff]

Thanks man :)

[@AgustinSevilla]

What an amazing job! Impressive work man!

[@MakeSomething]

Dude! That's crazy awesome!

[@Iliketomakestuff]

Thanks man!

[@benjamincole4716]

Spoiler alert: that one guy does that one thing

[@sspoon]

NOOO THE ENTIRE FILM'S RUINED NOW!!! HOW COULD YOU?

[@AbeTheRock]

Benjamin Cole When Vader decapitated the main characters?

[@planbskater19roblox27]

Abe The Rock and when all the main characters died getting the plans?

[@christianoh98]

planbskater19 ROBLOX Delete your channel.

[@planbskater19roblox27]

christianoh98 lol no kid

[@fatbrian9458]

Yes! Armour would be fantastic!

[@WhundersAlternate]

I remember when I stumbled upon this channel when it had somewhere around 300k subs a few months back, now he has over a million! Good job!

[@domonator5000]

I loved the this trooper's helmet model way more than any others before

[@corywildasin5705]

This is awesome man. I just found your channel and I love it! Keep it up man!

[@craftedworkshop]

Dude, that turned out AMAZING. Gonna wear it to the theater?

[@Iliketomakestuff]

Thanks man! I just might ;)

[@craftedworkshop]

I Like To Make Stuff you better! Seriously man, that is some incredible work. I really need to dig into learning Fusion.

[@Bretts_Builds]

Bob help, I made the helmet and now I can't find the tools I'm looking for.

[@uuddlrlrbas]

Now this is a guy with a lot of patience. I like this guy. Very precise with everything why is no one else like this in today's generation?

[@causalmcnuggetsletsplay5164]

Jindevilt V hi

[@kevingreenfield8285]

That scarif trooper helmet looks really cool and I wished I can things like that, so cool.

[@florentsaliu9414]

man thanks I love star wars

[@Iliketomakestuff]

me too!

[@florentsaliu9414]

Nice I can't wait till the new one comes out!! Are you excited ?

[@Iliketomakestuff]

Florent Saliu of course!

[@florentsaliu9414]

Nice man !! 👍

[@judasruiz3908]

I Like To Make Stuff hi

[@brandino4466]

Can you make one without a 3D printer? I don't have one :(

[@Iliketomakestuff]

Some people have done it with EVA foam floormats.

[@brandino4466]

I Like To Make Stuff Are there any videos of that? I really want to make one

[@Iliketomakestuff]

Death Star productions don't know if this helmet in eva specifically, but check out my Batman helmet video to see the process. Also, check out everything from Punished Props.

[@brandino4466]

I Like To Make Stuff is there a template? Or do the have a tutorial how to make it

[@VAULT-TEC_INC.]

Death Star productions My local library has a 3D printer that anyone can use. Check for similar resources in your town, such as high schools or park districts.

[@justliam2768]

Man, this is amazing. Technology is leaving me trailing. I'd love to get into all this but my brain just won't learn computers.

[@HaraldDeathwolf]

This is awesome Bob!!! I love star wars and think that your love for making stuff and star wars is fantastic! This is one of the best helmets I’ve seen! And great job on the painting

[@NERO-ez1mn]

i really like how true ARTIST do their JOBS; perfectionist

[@lachieclements6859]

"RKGIENFJEJFMEKDKE" (We need a Death Trooper helmet!)

[@loop5720]

yeeeeeeeeeeeeeto

[@iamaioshi]

Get ready to go viral!

[@z6n387]

I've always been on the jedi's side, After watching this I think I want to be a storm trooper now! xD

[@johanderuiter9842]

Good stuff.. Awesome how you go through each step in making this work of art. Rogue One is the best SW movie yet!

[@Joran2004]

Make a shoretrooper gun!!

[@Iliketomakestuff]

It's actually on the printer right now (not my model, one that someone sent me) I'll probably be building it on my Twitch live stream over the coming weeks. www.twitch.tv/iliketomakestuff

[@Joran2004]

I Like To Make Stuff okay nice👌

[@theinfernostud6226]

Joran It has a name u know I think it's called E-something

[@pfcthomasw.9394]

Lil Jo-Jo Great idea 😇👍🏼

[@Insane98]

You realy should make the rest of the armor. After that put it on a dummy and put it in a corner :O :D

[@Jeroen_93]

Great idea

[@hugopohlak5831]

Dennis And it would take ages to make

[@doubledarefan]

Work that into the Star Wars Nativity Scene.

[@squigglylines420]

yesh eyshhsheyadsadaseeeeeeeya

[@ShareTN]

*Spoiler alert* Han Solo dies. Errr, no. I mean. Chewbacca loses hair and a ball of it gets stuck in his throat and eventually dies.

[@Packhuffer]

Wrong, leia is revealed as Chewie's grandmother and is killed by the shock. You clearly haven't seen the movie, so don't act like you're smart.

[@ShareTN]

Sir Skeletor I've seen all nine movies and the story goes like this. The whole series is just a dream of Chewbacca during a long journey in the Millennium Hawk. :P

[@Packhuffer]

ShareTN False, there are 11 movies and they are all dreams of Chewbacca but the 10th one it is revealed that Jar Jar Binks is snoke and Ham Solo is killed by his son, jar jar banks.

[@ShareTN]

Sir Skeletor hahaha. I'm waiting for the 12th to come out. They say C3PO and R2D2 finally make it to the third base.

[@Packhuffer]

ShareTN Wait, wtf.

[@YoureASquidYoureAKid]

Bob this might sound weird but you should drop it or scratch it a little bit. To give it that extra touch!

[@brooks1052]

lol that does sound weird but thats a good idea

[@JordanCataldo65]

unsure of how the 3d printed material holds up, but i did the exact thing to weather my fiberglassed Boba Fett helmet. smacked it against some concrete block, rubbed charcoal all over it. Turned out real nice. The best way to get that "real weathered" look is to paint a silver and black as the base layer so when you chip off your actual top color, it has that very minute depth to it that makes it more realistic up close. I tried putting the silver and black on over top my top color and it looked exactly like i did that hahah

[@josesoto-ec2my]

Wow Bob that looks freaking awesome!!

[@Iliketomakestuff]

Thanks!

[@HelloKitty-sd9vs]

So cool! Not really a fan of StarWars but I really like it. Like the “rust, dirt, scratches” lol

[@AlexDestaK]

3:39 huge

[@loop5720]

So big.....

[@loop5720]

*That's what both of the opposite males said*

[@Gemini_Luv23]

Spoiler:Your awesome dude

[@Iliketomakestuff]

I SAID NO SPOILERS!!!! oh.. thank you :)

[@yaboijjonah._.1815]

When will you make a he man sword

[@Iliketomakestuff]

I made it on my live streams on Twitch a while back. www.twitch.tv/iliketomakestuff

[@yaboijjonah._.1815]

I Like To Make Stuff is there a way to rewatch that stream

[@Iliketomakestuff]

Robby Collins They stay on Twitch for a little while but fall away after a certain amount of time. Unfortunately that one is gone by now :/

[@yaboijjonah._.1815]

I Like To Make Stuff aww man I was really looking forward to making a he man sword

[@danielmaloney128]

I like it can you make me some clone trooper armor? I would love it.

[@BucketOfSoph]

The imperfections are what make it perfect!

[@SteveSenar]

This. Is. Awesome!!! You even sound like a real stormtrooper when you put it on!

[@ParkRanger2000]

It's Scarif Trooper.

[@Iliketomakestuff]

No. Scarif is a planet. They're called shore troopers. www.starwars.com/databank/shoretroopers

[@Iliketomakestuff]

The Rebellion I've only seen them called that by people who don't know that they're called ShoreTroopers.

[@ParkRanger2000]

+I Like To Make Stuff Hey, I'm just saying they're called by a different name. You can call them what you want to call them.

[@vcrazy_diamond]

Star Wars Battlefront calls them Shoretroopers buddy.

[@ParkRanger2000]

Ok, but they're called "Scarif Troopers", too.

[@kackmann4016]

can I have that?

[@ChadBravez]

I'm a Star Wars nerd to or fan

[@that1guy839]

That is a beautiful helmet, and when you put it on the voice changes and that makes it even cooler! I would love to have one of those! Keep up the good work 👍

[@ian9outof10]

What a great video. I love stuff like this, and this video was the absolute perfect balance of how it was done and showing how it was done. Epic stuff.

[@PabloColazurdo]

my son is a big fan of star wars and he loved this project...thanks for sharing

[@moviereviews541]

May not be a 100% screen accurate, but that helmet is WICKED AWESOME! Love it man!

[@InsufficientFare]

whats great is that it doesnt have to be screen accurate at this point. its your variant now and you can add your own embellishments to the armor. Great Job, totally inspired me to make one. I dont have a 3d printer but i have a heat gun, a few 3L soda bottles, spray paint and a few hours to kill im sure i can knock something out.

[@brendonwheeler2853]

Wow that looks amazing and very time consuming. Good job and I wanted to recommend placing window tint or any kind of film with adhesive on the direct middle of the piece you are trying to cover. It will help remove all of the air bubbles due to the middle pushing air outward.

[@JWoodard93]

7 years old and I still watch this regularly because I want this helmet over any of the star wars helmets out there

[@c__handler]

Hardwork pays off, looks great!

[@jackburke5313]

I AM AS EXCITED AS YOU ARE ABOUT ROUGE ONE AND STAR WARS

[@AtomkeySinclair]

Excellent build - watched to the end. Thanks for sharing. Looked great after weathering...

[@thomaswright968]

Super impressed mate! Well done 👍🏻

[@royg1908]

That's about as awesome as awesome gets. Excellent job.

[@patrickfitzwater5511]

If you use the heat gun on the window tint first to "shrink wrap" it to the shape then apply it It might work better. But while I am typing this I am thinking that unique shape might not matter what order you do it. But that is how it's done for odd shaped glass in automotive. But I have to say you did a great job and the helmet looks awesome

[@youmintubes]

this turned out wonderfully! a few things you may want to consider in the future: when bonding with CA glue or 5 min. epoxy, you should really consider sanding away the paint and primer in the areas to be joined. you may find in a few years, that the visor may just fall off as it stands now. same thing applies for plexiglass. the areas to be bonded, should have been roughed up just a bit (though this is less of an issue, as it wasn't painted or primed). i'm sure another may have already mentioned this- but plexi is available in multiple shades of black, with varying degrees of opacity. next time you could save a bit of hassle with that window tint. the only other thing i can think of that's worth it's weight in gold for projects like this, is the red bondo spot putty, during the sanding/seaming/refining stages. just apply it right outta the tube (no hardener required). it dries rapidly and sands like a dream. perfect for smaller areas when mixing and using standard bondo would be so much more hassle. once again- great job and keep up the fantastic work!

[@markhensens5989]

I still think that this is one of your best projects.

[@MaximilienRobespierre1]

How much was this to 3d print? I downloaded a file and it costs about 300 dollars to print, that can't be right???

[@CarlosMorales-wk5bg]

Great job man. Such patience

[@4Rbabi]

Shoretroopers are my favorite so thanks for making this video

[@DIYGene]

Very very cool project. Nice work!

[@richmbailey]

Very cool how to. Helmet turned out great.

[@Iliketomakestuff]

Thanks!

[@StonerEyes420]

That's an AWESOME job dude!

[@unhandydaddy5117]

Damn the empire needs to hire you! that looked super cool!

[@stephenmcbride6359]

Lots of work, but awesome. You're an artist, great job.

[@the_headless_horseman9682]

You're one of the rare people I saw that actually knows how to paint. I don't know how many vidoes I've seen of good props ruined by a terrible paint job, usually people don't even put a base coat on.

[@BSBT]

great job!

[@masterchieff007]

Wooow lot of work despite the printer .... Great job!!!

[@rickytoddbotelho9555]

You did a fantastic job. Man oh man.

[@kevin-wj5pq]

How is this imperfect..... its perfect!

[@5mepo5]

Great job on the trooper helmet I was at the Aussie Supernova on the weekend and was talking to a lady in amazement who 3 D printer her entire Cpt Phasma cosplay costume very impressive and well worth the effort hey Good video

[@robredfeather8731]

Nice job!!! I just got a 3d printer and am going over different SW helmets to figure out which one I want to make first. Nice process and it looks awesome.

[@AndrewArsenal]

Wow that's amazing. Well done!

[@thesecretworkshoppropscust7215]

Hey bob. Love watching your videos and have me the inspiration to finally set up my own workshop! Currently have this shoretrooper printed just for the sanding and filling!

[@damianflaig5594]

a good trick with bondo is drop some of the puddy stuff down, then put a small bead of the activader through the middle. This will result in a almost perfect mixture every time. Hope this was helpful.

[@36itaycohen]

your best project yet

[@thomaszanis4049]

I recently was informed of an technique that has been working for me. You thin out the bondo with some acetone or rubbing alcohol. this allows you to put on thinner layers to fill inthe layer lines. i use 400 grit sand paper to smooth it all out.

[@spongebob358]

super job. Be proud man!

[@jghanson25]

Beautiful application for a 3D printer.