Start Up was a little rough

[@apmedeans7905]

You can tell Alex loves her truck. The smile on her face when it started was priceless , Jared, Another rebuild is great his is turning into a great mechanic. You must be so proud . Great video, Andy. You do a fantastic job .

[@jimboh44]

What a dad. The money you spend to keep Alex happy.

[@johnnye747]

Like seeing your Nuhn vac truck adventures. We ordered and received two 4500 gallon units after watching your episode about them. They load in the fairly dry corral manure phenomenally fast. We unload through the elephants trunk onto tankers and then direct land apply the manure. The trunk is smaller than our current pull behind vacuums and didn’t unload very well. Nuhn’s solution was to deliver these vacuums to dairymen in Idaho that use them the normal way. They were happy because they were on the waiting list. Now they are modifying the overhead piping to bigger diameter and less bends and building them into two new units. Their willingness to redesign to fit our operation is pretty awesome. We are looking forward to getting the next new ones and putting them to work. PS. I can’t afford to watch your channel anymore….🤣. Thanks for letting us follow you and your family along.

[@FarmingFixingFabricating]

I’m glad to hear that Nuhn is working with you, however I’m not surprised by their willingness to suit your needs. That’s just the way they roll,

[@kal3rd]

Andy great video the smile on Alex face when her truck started she must be very comfortable driving that truck she started with it great job dad. The job that Jared did with that rebuild and is amazing. 👍🚜

[@jamiecota1628]

Love Alex in the videos. Love her facial expressions, so funny.

[@Oliver-kv2mm]

Alex deserves it, she does a great job.

[@ronaldfeuerstein435]

Tks for sharing. Jared rebuild sounded Awesome. Like its hitting on all cylinders right out of the gate. What a way to prime the oil pump.! He just wanted to see if you was paying attention...lol. You could tell Miss Alex was just as happy she could her ride back out on the road by that smile she had..

[@martinboilard2265]

Hi Andy ! that freightshaker is in good hand , new exast system ,no gouverner she will be very happy to drive it every day. Good job Jerret ! i have to keep my fuel tank in my boat full if i do not use it for long time for the condensation in the tank , no air just full of fuel . Thanks for your time and have a good everyone at the farm ! 🙋‍♂️

[@arthurferreira2937]

Great kids you have You must be proud

[@michaelmatthews4726]

Andy, tell that boy to smile once in awhile LOL

[@thewayidoit8895]

Careful, he'll scowl at you too! Haha

[@beckyumphrey2626]

Great video. Alex wants her truck back. :)

[@donniehodge2548]

Another good job Andy 👏

[@EricStruckhoff-jd2lr]

The look on Jered's face at 22:21!! Priceless

[@josephmccarry6700]

Your kids cease to amaze me Andy, most kids now day don't want nothing to do with the farm life. Jared could go out and make really good money for John Deere or CAT but he won't cause farming is his life just like mine. Love the video's Andy! Keep them coming. Jared should build a pulling tractor that would be cool to watch!!

[@PhilGoldblum]

"That's how you bleed the oil pump" - Snickered for a few minutes from that one. Thanks for the video Andy, much appreciated.

[@allanrobson7242]

Another great video, what a lovely sound when they start up,and the smles on everyone's face.

[@chuckyc6912]

Your videos are always top notch. Great bunch of workers

[@johnc8112]

What a Smile on Alex face . Keep up the awesome work you do with your family and crews Andy.

[@leefrederickson5526]

I always knew you were on the the upper scale. You are now the KING!!

[@KeithRoyer-d1p]

Great video Andy. I drove a few Ryder trucks back in the 80’s and they were all governed to around 65 mph

[@stevenclaeys6252]

Thank you for another Great video. Cheers

[@XenduroX21]

😍Alex is gorgeous!!😍

[@jeffhoard4777]

Another great video Andy, thanks for all the great videos you do and post and take the time to do 😊

[@johnhenderson299]

8320 sounds good great job Jared

[@philglover2973]

Awesome video thanks Andy for your time and consideration top job top farm 🚜🛠️🔧🚛💯

[@cjcoughlin5041]

No wrong with a little uncle ether to get a fresh engine started. Not like it wasnt lubricated with all the cranking previously. Awesome video

[@davidyoung9195]

You are supposed to pump the manual fuel pump 200 strokes before trying to start. I always did mine that way, spun the engine over a few times, pumped it up again and then it started. That’s how the book says to do it and also what Detroit mechanics told me. There is also a tool for filling the filters but it’s rather pricey and me being a tight ass I just used the manual pump. Looks like everything sealed up good.

[@FarmingFixingFabricating]

Oh ok

[@walterdodds3925]

That start you bastard works every time.

[@bottomshot4546]

aka Cosby sauce

[@frankmeyer8137]

That has to make you feel great!!!!

[@InMyBusyLittleShop]

Nice video Andy. It will not be long before you are back in the fields.

[@kevingordon7426]

Stubborn starts today. Glad you succeeded.

[@Navajo-man]

Hi 👋 families and excellent video Andy and as always you all be safe 🇺🇸🇺🇸🇺🇸

[@KenHowe-g5b]

EXCELLENT!

[@Planeiron]

The Mighty Deere....Great Vid Helo Jared👍👍👍👍🐄🐄🚜

[@alistairholroyd4071]

He’s done a grand job with that engine sounds well

[@CharlesSmith-ty2ce]

Thanks Andy nicely done 😊😊😊

[@colinkennedy8730]

Well done team

[@brianchaney6753]

Awesome video Andy

[@gwbuilder5779]

Sounds like a possible weak injector on that 8320. Doesn't seem to be loading and off loading very well, you can hear the engine surging. I'm not sure how these newer injectors work, but a weak spring would allow it to leak off and cause a hard start situation. The fuel in the exhaust is probably related. Another engine back in running order, just some minor adjustments. Great job!🤙

[@paulcrocker2837]

Great video as always

[@johnhenderson299]

That vac truck is quite impressive

[@stephensteen9058]

Thank you alex you are the best

[@miniquad22]

Good old summer in a can

[@Tommy-vh7xj]

Ger knows his stuff too

[@PAYNEKILLER..]

Ol Peg would be proud

[@fwb8627]

I changed fuel and oil filters at the same time on those Detroit's. Never done that again. No more hard starts.

[@williamgreenway9893]

She likes the Peter car but likes this one better! ❤

[@jong7641]

His handy dandy pocket wrench makes another appearance.

[@kevinrutt5949]

They both sound good now after you got them started

[@mikebonge7206]

thanks

[@geesss8675]

So the old Clapped out peterbilt has what engine/hp/torque rating? What transmission is in the old Clapped Out Peterbilt? Have you compared the two new Freightliner Coronados? How are they the same? How do the differ? The sure are great trucks

[@davie2606]

Just watch those cap screws Andy they don’t come slack with the heat.

[@jimmclean160]

Good old John Deere equipment got to carry a whole can of starting fluid just to get them things running anymore not the short can I'm talking to the 24 oz can

[@FarmingFixingFabricating]

Oh

[@glenngerun8240]

mexico makes stuff so cheap brake drums wear out faster than brake shoes, same for bearings & most stuff they make. Gotta buy quality American everything

[@davidwhite4474]

I'm not sure what year it was , but the EPA and the 3 motor companies got together and went around to the trucking companies and told them to stop messing with the engines . They could limit the speed only or they would not warranty the motors and fine them for taking the motor out of EPA regulations . So you need to put it back to factory EPA specifications and just limit the speed if you want .

[@jimc4731]

Maybe a weaker shear pin on the auger? JIM 🥰

[@jimmclean160]

Pocket change to a giant slender 💵💰💵💰🤑🤑💸💸

[@donbullock8790]

I just read the previous comment. I was taught that you crack the fuel line at the pump and start priming. When you fuel without bubbles then try to start it. Question on a totally different subject. Do you ever take a vacation? I'm not talking an E bike ride to the forest preserve I mean 2 weeks in Florida.

[@FarmingFixingFabricating]

I haven’t in quite a few years

[@MrTonyharrell]

Oh man, I’m watching steam or smoke or something wafting up after you laid the torch to that flighting. I know you washed it best you could but I could still see some DooDoo, bet it stanks after hitting it with a torch! Yuck!

[@jameschapman6908]

You'll need a laptop to access the ecm to change the settings. The dealer will do it

[@jamesmorrison1884]

Hello Andy minor start up issues sometimes to be expected. I've never done that big of engine but have had fun. See what the tractor brings thanks for the video enjoyed this thankyou.

[@garthland]

odd question-do you check lights on trailers much? I've made a couple light checkers that take either Milwaukee or Dewalt batteries.We use them all the time here. 7 way round pin. If you want one I'll build you one. The one tool Milwaukee doesn't offer!

[@FarmingFixingFabricating]

Jered has something similar

[@garthland]

@@FarmingFixingFabricating ok! Chris down in the tank shop wants one too. Mine are aluminum tig welded and stainless.I have a a pretty good 'side gig' going with the locals around here.

[@mattphillips4260]

i hate changing fuel filter on my Kubota tractor it tends to be a butt pain to change

[@gilreynolds9282]

It would be nice if they put a real bearing on the end of those augers.

[@Allan-e9g]

Why that is a very simple way of doing it and very easy to change and not expensive.

[@maxfender6886]

Good evening Andy

[@kevinrutt5949]

She say yes I want my truck back please lolo hey Alex how are you doing??

[@bobearl7859]

Why didn't you just buy the exhaust bellows that go between the pieces they're only about $175 a piece

[@johndellinger4877]

Needs a little vitamin E lol

[@jimmclean160]

Sarah,Alex, Charlotte tombboys

[@nice-n-generous1649]

What ever happened to Sarah?

[@eddief3326]

frightliners you should be able to turn the cruze on and hit the accaltrat button tobspeed up and theideal will come up . 15 years driveing.

[@johnpratt9429]

What did cavemen ever do without a “hot wrench” ?

[@jenslorenzen-fh3oe]

Det ligner grangivelige sådan 8v 72 Detroit der ligger i den lastbil der. Hello Andy im from Detroit is this a 6v 92 with a blower and turbo intet politi d’et upopulær?

[@deronlogterman2951]

Is that the same tractor that was overhauled last year? Or is this a different one.

[@Oliver880-eg8sz]

Did you go to Burger King for that crown?

[@jenslorenzen-fh3oe]

Andy er det ikke en Detroit 2 takter dén der?

[@cliffordarnoldussen]

I heard that under warranty, you guys haven’t had that machine in a year yet have you all the problems already happened?

[@x_Dude1]

As far i saw it was a hose inner liner (can happen) and now a rock caught in the augur.

[@steveharrington301]

👍

[@jeremynguyen2346]

Hey 👋

[@jimmclean160]

Where is your three tomboys and your son bub at

[@NorthEastOhio]

Hope our 8300 doesn't start that hard

[@FarmingFixingFabricating]

Different fuel system

[@NorthEastOhio]

@FarmingFixingFabricating thanks

[@noelhohberger1188]

People talk and judge. If they can tell you how to do it better? I don't gamble but I guarantee talk is cheap

[@steveanderson2095]

You guys should not be running the tractor like that without the big doors behind it wide open. You will have carbon monoxide build up in your bloodstream already

[@FarmingFixingFabricating]

Ok

[@steveanderson2095]

Carbon monoxide sneeks up on you and gets into the bloodstream. Suggest you may like to Google more about it. But, certain you aware. Love your videos

[@duggydo]

Looks like you're figuring out what parts you need to keep as spares on hand for the Nuhn. How many hours on it now?

[@FarmingFixingFabricating]

2000

[@jaymassy9395]

Sure shuts off nice, ha ha just kidding

[@jameschapman6908]

Hit it with some either!

[@jerrymurphy6673]

Thanks you again

[@jimmclean160]

Spender

[@frankweir7783]

Waiting on Jarod to buy a John Deere dealership store or milk prices to start with 30 a hundred weight so you buy new equipment

[@jenniferwhite6089]

that teaches you a lesson to take Daisy's calve away from her stone was the revenge on you

[@edwhite6250]

👍