Starter motor replacement (2001-2008 Ford Escape)

Replacing the starter motor on a 2001 Ford Escape. No need to drain the coolant system and remove the air intake box/tube. Covers years 2001, 2002, 2003, 2004, 2005, 2006, 2007 and 2008 Escapes, Mazda Tributes and Mercury Mariners.

[@brucepittluck6664]

I was a mechanic for 15 years, never have I seen a better demonstration of how to do a job. Including wrench sizes and shortcuts!! Great job.

[@peaches5712]

I’m a 71 yo woman and this was so well demonstrated I feel confident in replacing my stater myself! Thank you!

[@noelramirez8187]

Dang, I have never seen such a well produced instructional video. There was no filler or hype, just great and easy to understand instructions. Thank you!!!

[@craigholliday3307]

Well, you win. Best video, hands-down, of any repair of anything on KZbin. Arrows, instructions, and actual hands-on repair in clear video. I am speechless. And now, I get to go do this to my future daughter-in-law's Ford. Thanks for the video...I REALLY didn't want to deal with the coolant!

[@Vussian]

u made this look way easier than it was (at least for lil ol me) but i freaking did it and it was my first time fixing anything ever. THANK U ANGEL

[@kayeraps8482]

Omg you gave me faith that i can do this 😪💪🏽👷🏽💅🏾

[@Zwicken1776]

The 2010 version with the 3.0L is VERY similar to this except didn't have to remove/move ANY hoses at all. Took me 15min to remove. Easiest starter I've ever had to change. Ours quit today and it was the original one. LOL. GREAT VIDEO!!

[@chrisschlis9440]

Technical knowledge sharing gold right here! Video is SO WELL put together. I dont think I've ever had more confidence in a repair that I'm about to undertake as I do this time. Thanks so much for your excellent video!

[@0TeePee0]

I stumbled upon this while trying to diagnose my escape that has power but will not start. I don't know yet if this is my fix, but I had to compliment you on the detail and effort put forth in this video. Amazing work. Now I just need to confirm my starter issue

[@132danyoll]

Did it end up being your starter?

[@kjrc1999]

You saved me today! God Bless you and your family!!!! 2 1/2 hours in a Walmart parking lot with the help of a man I will call James! He gave me a ride to and from an auto parts store to pick up a new starter! May God Bless you James, wherever you are!!!

[@GreaseMonkeyFever]

Glad it helped. Nothing like being somewhere and the starter goes out. Usually, they will warn in advance by dragging, causing slow cranking. After a while, it gets where you have to tap them to get them to turn. Then the final phase is where nothing works...then it's time to change them. Actually, the time to change them is when they start to drag! Thanks for watching!

[@ManicMechanic007]

Again, a polished production far better than any instruction guide or repair manual. It must take some time to complete the filming and editing. Thanks so much for your hard work.

[@GreaseMonkeyFever]

Thanks, Manic! It does take a little time, but it's worth it if it will help someone out. A lot of people are like me...they've never done a certain repair before and don't know where to start. I can't tell you how many times I've done a repair one way...figured out it would work better another way...put everything back together...then do it all again the alternative way. My family, friends and neighbors think I'm nuts, but it's kinda fun...I enjoy doing it. Thanks for watching!!

[@johncortez1599]

To mirror what ManicMechanic007 said, one of the best how to videos I have ever seen! Very detailed, and clear precise instructions. Having said that, I am unable to get either of the 2 13mm bolts loose. Any suggestions? Thanks in advance. (I'm using an extension and a ratchet on the back bolt, but I can't get it to budge)

[@timelve4003]

Thank you! Your detailed explanation made it possible for me to replace my own starter for the first time saving me an appointment with the mechanic, hundreds of dollars, and towing charges. Nearly every part of the video needed to be followed precisely but it worked exactly as shown. I could not have done it without your video.

[@GreaseMonkeyFever]

Glad it helped, Tim! The manuals say to drain the cooling system and remove the hoses for access. I try my best to avoid draining and refilling the cooling system. Luckily, it can be done without doing all that. Thanks for watching!

[@nolenlujan3624]

This is the best video I’ve seen about working on cars No gay music the whole time no over explaining just straight to the point step by step BETTER THAN HAYNES

[@GreaseMonkeyFever]

Thanks, nolen! That is the format I decided on when creating the channel. I'm an old-school manual guy. I wanted videos that worked like a manual, but with detailed, moving pictures...step-by-step. Thanks for watching!

[@JuicyLadyK22]

This is one of the BEST detailed videos ever!! Thank you so much!!

[@JS3music]

Im starting hvac school in the fall and this project I have decided to tackle as introduction to said courses. Thank you for this contribution. Hope you have more. Im gonna tackle some projects thanks to you!!

[@bobmateljan6986]

Congratulations! YOU KNOW HOW TO MAKE AN INSTRUCTIONAL VIDEO! BRAVO!

[@NOISlights]

Hey man thanks again for another amazing video. Just changed out my starter today in about 40 min taking my time since I have huge hands.

[@user-rd7on5wz6o]

This video is the only one that made the job look so simple and it worked amazing!

[@jerrybush4096]

213,000 miles changed it today in under an hour thank you so much for the awesome video you Rock!!!!

[@thosyoungvideos]

One of the best DIY automotive videos I've ever used. Thank you.

[@user-rx1zo1ji2o]

Fantastic demo...no minced words...thanks!!!

[@mc996cars1]

I did my starter today and I want to thank you for this video and your other escape videos. The front starter bolt was hell though, My hands actually cramped up. lol...Please continue your great videos!

[@sprite3908]

how’s you get it out ?

[@D.C.MCMLXXXIV]

Ustedes hacen ver todo mas facil son un exelente canal.....y no hablan....solo van directo al objetivo ...👌👍

[@ivybutler07]

Your video was absolutely helpful. Removed old and replaced the new in less than one hour. 👍 Thank you

[@keithkollenborn2271]

Great description of the steps and AWESOME video/photos. Well done. Was a great help.

[@BillCowanUSMC]

Superb. Best video, hands-down, of any repair of anything on KZbin.

[@GreaseMonkeyFever]

Thanks, Bill...hope the vid helped you get the starter changed out. This was on a 2001. I have a 2006 that is easier to get to the starter mounting bolt...guess they made a few design changes later. Thanks for watching!

[@oby-1607]

Excellent repair video. I will have to replace the starter on my 2008 Escape and this will help tremendously. Thank you sir.

[@kongchingpow]

I love the amount of detail! Thank you so much!

[@gestaltgaragellc.9893]

Good video! Starters are simple but I appreciate the heads up about that coolant hose. Thanks!

[@freddyaguirre1981]

Awesome tutorial. Thanks for taking time to describe each step and tools needed.

[@Backcountryhiker]

One of the best "how to" videos I've seen! Thank you!

[@hipolitoanasco4146]

I congratulate you on this demonstration and I have never seen a video like this thanks

[@delfinfloresca]

I did it!! Thanks for this video! I almost gave up trying to get the starter to sit properly but I took a break and tried again. Video was so very helpful!!

[@jameskelly9583]

Absolutely awesome instructions. down to the the pry bar. It took 90 minutes start to finish this video made it so simple and I felt like a pro it was done so quickly.. sadly it was not the starter! iT is not the battery or alternator. going to miss a half day at work tomorrow to find another possible cause.

[@chaunceyjude]

Best damn video on KZbin for installing a starter. Thank You

[@joetislow6161]

Great job on the video and step by step walk through. One the best videos on here.

[@highcard07]

A really, really great how to video, well done 👍👍👍

[@GreaseMonkeyFever]

Thanks, highcard...hope the vid helped you get your starter motor changed. Thanks for watching!

[@williamedwards3700]

Thanks, this made for an easy removal. Note forward bolt was accessible with a swivel socket

[@luiscowley9148]

I wish all online tutorial videos were this good!

[@ATREIDESDUNCAN88]

Had a mobile mechanic fix my car. He cleaned the battery post and the lines connected to the starter. And it started right up. My car was giving one click when turning on.

[@aimvee45]

Thanks a ton! Great video.. I unfortunately have to go out and tackle this in a snowstorm

[@GreaseMonkeyFever]

Yikes, AimDogg...no repair job is fun in the snow...even a small job! Thanks for watching!

[@aimvee45]

@@GreaseMonkeyFever honestly I couldn't have done it without your help. You helped me and I'm sure many others tremendously. And again, I thank you so much

[@aimvee45]

If only we could post pictures to show you how this was done lol.. I don't have a garage, but I had a tarp and bungee cords .. I used the factory roof rails and the fence ahead of me to put up a tarp to keep the snow out lol

[@brianparent1832]

I found that using a Wobble extension and you can get to the bolts pretty easily! And when you put it back on put neversieze on the bolts and alighnment nubbs.You'll see if this is the first time taking it off,it's usually Stuck.

[@danchuan8864]

Very comprehensive guide, thanks for nice job, this helps me tremendously indeed.

[@GreaseMonkeyFever]

Thanks...glad it helped. Thanks for watching!

[@TheeLoneRanger]

5 stars for everything. Wish all vids were like this!

[@garybouwman2157]

Best video ever . Thanks so much.

[@diyguy2383]

I have an 06 4x4 ford escape 3.0 and the starter is in a completely different place haha and its super easy to change out on mine

[@flyinggusto]

that was very helpful, thanks. unfortunately i've discovered starter was not my issue.

[@gavinjones88]

This dude is amazing!!!

[@arturoayala1206]

Thanks didn't know those were pins now I can work on it no sound but great work 10+

[@BatteryGeekReviews]

Thanks, I used this vid to change the starter in my 2006 Mazda tribute v6. The coolant hoses and evap stuff are slightly different, but easy to figure out. I was able to use a normal extension to get out the front bolt, the rear was actually the hard one for me. My starter seized on the flywheel, so I had to turn over the crank with a cheater bar to free it. Took about 3 hours and $125 for a remanufactured starter.

[@craigfloyd5305]

Thanks for watching and glad it helped a little. Wow, starter seized to the flywheel? How did that happen? Just curious.

[@BatteryGeekReviews]

Craig Floyd it popped out, but didn't go back in when the key was turned off.....I had to turn the core in at autozone and even they were surprised when they saw it. The starter worked normally the day before, so I assume a rare failure.

[@brianhartman3186]

Can't thank you enough! Great video!

[@briansangeorzan4986]

Very well done video - thanks!

[@AdmiralDG]

Really amazing video, very clear and helpful angles as well as explanations. Would have loved a little music, but otherwise one of *the* best automotive video I have seen. I am getting ready to do this on a 2001 that has been sitting in the same muddy driveway for the better part of 3 years. Anything special I should be concerned with, or tips you may have on getting a long sitting vehicle roadworthy? Thanks again for the video!

[@GreaseMonkeyFever]

Thanks for watching! Probably the first thing I would do is remove the spark plugs and turn the crankshaft manually, just to make sure the engine isn't seized up.

[@boomerguy9935]

Excellent video! My key ignition assembly is wearing out and instead of replacing it, I want to add a separate momentary push button for the starter. Can I tap into the power lead without removing the starter for access to the connector bolts? Also, what would be the best source for SWITCHED power. Thanks!

[@yourpointis2043]

If you take off the throttle body it helps A LOT as well

[@williamgardner6028]

Great video, thank you !

[@jesussandoval1435]

Test was a REALLY GOOD video. Thanks. looks a bit hard but u make it look so easy. I'll give it s try but thanks again for now... 🙉

[@GreaseMonkeyFever]

Thanks for watching, Jesus! Really, the only hairy part is disconnecting and reconnecting the parts around the throttle body. The rest is pretty simple...you can do it. Just turn up the iTunes and take your time! Again, thanks for watching!

[@jorgealvarado7287]

EXCELENTE TRABAJO,MUY BUEN VIDEO GRACIAS

[@marcoantoniosulubreyes2129]

Great explanation!

[@dulyaporn2872]

ขอบคุณครับ สำหรับวิดีโอที่สั้นและเข้าใจง่าย

[@neo307a]

Very, very good job 👏

[@jcismyname420]

ur videos are awesome u take the time to explain shit .. keep it up

[@GreaseMonkeyFever]

Thanks, JC...hope at least one has helped with a project you were working on. Thanks for watching!

[@kerry5061]

A big thumbs up on this video!

[@victoralcala6614]

Buen dia disculpa una pregunta la scape 2001 le queda un alternnador de una 2011 o no le queda"

[@insimplebeing]

Thank you. Very exact.

[@yourpointis2043]

Nice very helpful

[@torisofreshaiken3161]

Took the bolts out and still can’t get the starter to come loose, any tips other than bashing on it which I have tried for two hours already

[@Suckmyjagon]

What about a crow foot wrench mine went right on that bolt under the hose ..

[@ChrisBrown-ne3kf]

I cant get the wrench to sit correctly on the hard to get bolt. Once I get it on at all, im not able to move it without it running into something

[@botijasbonyvillareal]

soy de México muchas gracias por el video buena explicación hizo falta la voz 👌🏻👌🏻 🤝🤝🤝🤝💪🏻🔧🗜️

[@GreaseMonkeyFever]

¡Gracias, botijasbonyvillareal! No hay voz, porque los videos están diseñados para funcionar más como un manual... solo con imágenes en movimiento. Las personas pueden seguir y no tienen que preocuparse por tener que escuchar lo que se está haciendo, especialmente si hay mucho ruido alrededor... o pueden escuchar su propia televisión o radio mientras trabajan en la reparación. Recientemente creé un canal (Mono Graciento Fiebre) donde estoy convirtiendo los videos al español. ¡Gracias por ver!

[@botijasbonyvillareal]

@@GreaseMonkeyFever muchas gracias por responder ya me suscribi al canal es el primer video que veo que da una explicación total de principio a fin, sin esconder ningún tip. y sin cortar ninguna toma. un vídeo verdaderamente honrado. y da sugerencias de que llaves usar y el grado de dificultad que tiene el aflojar tornillo o tuerca. mil respetos ya he visto 6 videos y están perfectos. muchas gracias. que tengan mucho éxito 🔧👌🏻👌🏻🏆🎈

[@Andrew-rb4gs]

Would a ratcheting wrench have fit on the first mounting bolt under the coolant hose?

[@GreaseMonkeyFever]

This was done on my 2001 Escape. The space was that tight on the vehicle. I have a 2004 and 2006, which the bolts are easier to get to. Ford must've made changes after the first year. Thanks for watching!

[@boomerguy9935]

Good to know. My 2008 Escape 3.0 has the Gen1 engine and it looks different from yours.@@GreaseMonkeyFever

[@don-michealbell6303]

Solid

[@perceive8159]

This difficulty with this bolt did not exist on my 2008 Escape it was accessible with a socket and extension, there must have been a revision for that year and up.

[@GreaseMonkeyFever]

Probably so. A friend bought a 2009 Escape and that bolt was in a better place. Thanks for watching!

[@cluistube]

But now the real question is: How exactly do I purchase you the requisite case of beer to offset all the dammits you saved me from? Seriously...I need to do this. Great stuff as the Haynes manual was pretty useless and every fix starts with "First remove these 8 other, non-related components to access this security bolt" :D

[@GreaseMonkeyFever]

Knowing it helped is payment enough! You're right about the Haynes book...wanted you to remove some of the cooling tubes to access that bolt. Funny thing is, I did that video on a 2001 Escape. I have a 2004 Escape (with a blown engine) that I use as a "guinea pig" for videos, and I drive a 2006. That bolt is easy to access on those 2. After 2001 or 2002, they must've changed the design. Thanks for watching, and glad it helped!

[@cluistube]

@@GreaseMonkeyFever currently waiting for a replacement on my 2003 😁 bought it for $650 at auction three years ago and it just refuses to die. First "major" work I have done to it. Well offer 200k if the odometer is to be believed.

[@jerrytaliercio9087]

When is the movie coming out? 🤙

[@buckdonnally6497]

I removed the two bolts but my starter will not come loose. Its😢 like someone glued it. I'm afraid to prying it loose, might break it in someway Help me.

[@GreaseMonkeyFever]

My 2006 Escape did that. I took a small hammer and tapped (tapped...not beat) around it for about 3-4 minutes. It finally broke free. Thanks for watching!

[@sonidodannyboydjmendez4873]

gracias muy bien boy cambiar el mio y a i lescuento como me fue

[@Clamjammer]

I can’t get the damn start to come loose ! All bolts are out and it’s very stuck in place. Pry bar on it is moving the whole engine!

[@kam4245]

🙏🏾

[@markclarke8938]

what size motor 2.5 or 3.0

[@GreaseMonkeyFever]

3.0L

[@HIGHGRADECHANNEL]

Looks like you put the same one back in

[@snowblind5151]

mute

[@GreaseMonkeyFever]

And partially deaf

[@WiiZKiiD23]

I know why your index finger is missing

[@boomerguy9935]

Ummm....his finger is intact. It's just the glove end that is missing.