Steeda Ford Fusion Front Mount Intercooler | Review

www.steeda.com...
Fusion enthusiasts rejoice! Steeda has released their new modular design intercooler for 1.6L and 2.0L Ecoboost motivated Fusions. At the heart of this intercooler is a monster 28" x 7" x 3.5" core and CFD designed free flowing end tanks. Weighing in at a a svelte 15 pounds, this efficient lightweight aluminum design has more than 200% volume as the OE piece, as well as greater usable heat dissipating surface area. Depending on your engine, the OE temp sensor may be at either end of the intercooler. To consolidate the different applications into one unit, Steeda's charge air cooler has cast mounting bosses at each end and a CNC machined billet block off plug. While the OE intercooler is adequate for normal driving unmodified cars, adding upgrades, boost and spirited driving will tax the OE plastic cooler. This upgraded FMIC is a great foundation to build your upgrades upon and can actually extend engine life due to cooler internal engine temps and reduction of possible detonation under high boost pressures.
Features and Benefits
- Lower inlet temps for more horsepower
- Low pressure design yields higher boost from OE turbo
- Maintains factory active grille shutters
Subscribe: bit.ly/Steeda_YT
Shop Ford performance parts at www.Steeda.com!
Purchase these parts directly from Steeda:
Part Number: 555 3702
MPN: 555-3702
---
Steeda Website:
www.steeda.com
Steeda Performance Vehicles
www.steedavehi...
Steeda Europe:
www.steeda.co.uk
Steeda Facebook:
/ steedaautosports
Steeda Instagram:
/ steedaautosports
Steeda Twitter:
/ steedaautosport
Steeda Blog:
www.steedablog...
#FordFusion #Intercooler #EcoBoostFusion #Steeda #SpeedMatters

[@neoknight14215]

I'm interested in seeing what these parts will make my 2.0 feel like after driving it stock for over for and a half years.

[@szalonyy_6854]

Hey any updates? Thank you.

[@noone394]

I would like to see an upgrade option for the 1.5 EcoBoost option. many of us on the forums and Facebook pages would love to see one. I want to see how far you can push this platform.

[@erikmenger5019]

Same

[@michaeldickinson6411]

You should make one for the 2.7 Sport Fusion.

[@fusionsportdaily1650]

You guys should do more for the 1.5 EcoBoost. This should work with the 1.5 though. The 1.5/1.6 are the same Dragon block designed from the 1.0L EcoBoost.

[@blitherr]

gonna do an install video?

[@bobtart12]

This. Nobody has made proper install videos. I'm running around 23psi boost, heatsoak is a bitch 😂

[@smilingreaper1850]

@@bobtart12 is that on a stock turbo or did you upgrade?

[@bobtart12]

@@smilingreaper1850 stock turbo, just a 93 tune

[@jpirel79]

Is compatible with 2019 Escape Titanium 2.0L ??

[@NoName-kv6lr]

Make One for the 1.5 ecoboost please

[@steedaautosports]

This intercooler will not fit the 1.5L EcoBoost Fusion, as the intercooler is built into the radiator on those engines. Sorry - hope this helps! -Chris

[@sergiomurillo9930]

These fusions look like the 2015+ Mustangs

[@kennethcooper6383]

What's the purpose of it

[@durwoodrobison7800]

Does this work with the adaptive cruise control radar that is very close to the stock intercooler?

[@samramos2830]

Do you know where I can find a carbon fiber grill for 2018 Ford Fusion 2.0L

[@fastfordman1965]

Will this work on a 2014 Escape 1.6?

[@dennisrobinson8008]

What's the power gain on a 1.6L Ecoboost?

[@paulsvideos133]

Steeda will it fit the 1.5 ford fusion?

[@steedaautosports]

This intercooler will not fit the 1.5L EcoBoost Fusion, as the intercooler is built into the radiator on those engines. Sorry - hope this helps! -Chris

[@erikmenger5019]

What about the 1.5

[@Aixasaucedo63]

Does this work with the 1.6l ?

[@JuanMoreno-nj4rr]

When this intercooler is installed will it require a tune?

[@steedaautosports]

No tune is required, however if you are tuned - this will drastically help with heat soak. Hope this helps! -Chris

[@luucid5734]

How much power do you think it will add on a 2.0

[@luucid5734]

I have this intercooler, steeda cold air intake, magnaflow catback exhaust, and a 93 tune. I wanna get the garrett turbo upgrade but my tranny probably gonna blow shit has 150k miles.

[@UnknownMe321]

I don’t think these guys are getting back to us I’m trying to install one on my Ford Fusion 2014 2.5L SE

[@steedaautosports]

Hey Jorge - The 2.5L is a naturally aspirated engine and shouldn't need an intercooler, as this part is for the 1.6L and 2.0L EcoBoost. Hope this helps! -Chris

[@UnknownMe321]

Steeda thank you from seeing so many comments no reply I didn’t think I would get a reply lol well I’m trying to upgrade things on my vehicle so heard this would help thank you

[@markbeiser]

@@UnknownMe321 Plumbing an intercooler into the intake of a naturally aspirated engine would be pointless and hurt performance.

[@samramos2830]

Is this good for 2018 Ford Fusion 2.0L

[@steedaautosports]

Yes, it will fit the 2.0L EcoBoost!

[@bitteroldman3238]

Will that work on the 2014 1.5 eco?

[@steedaautosports]

Sorry Bitter The 1.5 EcoBoost has a different intercooler setup so this will not fit.

[@riley8280]

@@steedaautosports do you know the best option that would fit?

[@HubbyWard]

Will this work on the 1.5 fusion?

[@steedaautosports]

Hi David Unfortunately it does not fit the 1.5L engines.

[@bitteroldman3238]

Damnit 😭

[@steedaautosports]

@@bitteroldman3238 Sorry Sir

[@zdravkokatalenic5932]

Will it fit an european 2.0tdci engine?

[@steedaautosports]

Hi Zdravko We recommend speaking with Robbie at steeda.eu.com as they will be able to confirm European fitments. www.steeda.co.uk/