‘MASTER LINK’ DERRINGER. NON SHOOTING CONCEPT: Firing pin and trigger/ hammer geometry

Got back my interest to this project.
First :
Made a sprang firing pin that does not interfere with closing of the bridge like the free floating one did.
Second:
Got an idea of a trigger and hammer relationship - perfect circles geometry. I don't think I have seen this anywhere. SHOWING JUST AN ILLUSTRATION, THE REAL HAMMER /TRIGGER WILL HAVE THE ENDS SHAPED IDENTICAL TO THE WASHERS
I believe the release will be nice.
Also I finally decided about a single spring between the hammer and the trigger/ sear for simplicity and cleanness.
It has to be a torsion spring I may need to make.( I ruled out flat or compression springs. )
But it will be in the next episode(s)
Thanks for watching.

[@user-jt1se2no9c]

Да , если у мастера руки из плеч и голова золотая !

[@STEINBVG]

THANKS

[@sjengineering4789]

Been searching through the channel I love the content. You have some very impressive work! I will be waiting for more :)

[@STEINBVG]

Awesome, thank you!

[@40drnick]

This is phenomenal.

[@STEINBVG]

Thank you, but let’s see how it will come out at the end?

[@40drnick]

I’ll see tomorrow when I see you

[@2bitmarketanarchist337]

Cool design

[@STEINBVG]

Glad you like it

[@СегрейН]

вы всё-таки гений в этой области!

[@STEINBVG]

Thank you very much!

[@Messerwerkstatt]

Thanks for your interesting video .Tthe locking system was used by remington around 1850 "rolling Block" ......very nice

[@STEINBVG]

Thank you. In my case I have a tilting barrel that is hinged in the front. Typical derringer has the hinge next to the bridge. But any sort of hinged connection of barrel to the bridge perhaps falls into the category of rolling, sliding, tilting or dropping block.[ or barrel]

[@tianng3180]

Great video!!

[@STEINBVG]

Thanks a lot

[@verwolf3D]

Nice work!

[@STEINBVG]

Спасибо

[@kod5679]

Птички хорошо поют, вот только какой смысл в этом механизьме?

[@STEINBVG]

Когда закончу будет понятно.

[@ВРАГБАНДЕР.Самоделки]

@@STEINBVG ждем

[@STEINBVG]

Посмотрите последюю серию

[@ВРАГБАНДЕР.Самоделки]

@@STEINBVG хорошо.

[@dimamashnin2787]

Where is the trigger ?

[@777-p2t]

In front of your face lol.

[@dimamashnin2787]

how does it work then

[@STEINBVG]

I am still working on it….In the next episodes it will be clear.

[@dimamashnin2787]

@@STEINBVG Thank you

[@muu-lang]

ผมคนไทย ทําให้ดูหน่อยครับเป็นแนวทาง ละอุปกรที่ทําหาจากไหนเอาอะไรทําบอกให้ระเอียดด้วยครับ ถือว่าขอร้อง

[@STEINBVG]

I will show more details later

[@muu-lang]

@@STEINBVG Merci beaucoup. Je le suis depuis très longtemps, j'aime chaque travail et j'aimerais faire beaucoup de clips pratiques à titre indicatif.ขอบคุณสําหรับทุกอย่าง

[@nantatech3563]

goodday...do you have plan at 3d model

[@STEINBVG]

I think in 3d. Never make plans. I will show in more details later.

[@ArjNegahban]

میکانیزم ماشه خیلی عالی هست آفرین

[@STEINBVG]

Not yet, but I hope it will be. Thanks

[@kitso_2b68]

Living in the bush mate?

[@STEINBVG]

USA

[@geraldosouza1471]

Helo, sales for me the pistol project, please! Best Regards my friend.

[@STEINBVG]

I will show in enough details and discuss materials later.

[@juanmanuelherves7036]

Thanks.

[@_Its_Ya_Boy]

Caine wait for finished product

[@STEINBVG]

I am hoping to practically complete it soon.