STI: EWG Set Up/Install + FP Blue Turbo Install

  Рет қаралды 45,274

Smeedia

Smeedia

4 жыл бұрын

In this video I show you how to set up your EWG gate. This will include how to set up the spring pressure, where to put the vacuum fittings on the EWG and how to Oriente the dump tube and waste gate. We are using the Tail 44mm EWG gate, Grimspeed 44mm Up pipe, Force Performance Blue (FP Blue). This can be a nightmare for some people to install and I tell you it defiantly was not one of my favorites.
Smeedia Merch: teespring.com/stores/smeedias...
Grimmspeed 38mm EWG Up Pipe: amzn.to/2SjmzBT
Grimmspeed 44mm EWG Up Pipe: amzn.to/3cXNN92
Grimmspeed IWG Bracket: amzn.to/3bMT6rG
Tial 44mm EWG: amzn.to/2xhO7QP
Tial 38mm EWG: amzn.to/2VP0qO5
Grimmspeed Turbo to Up pipe Gasket: amzn.to/2W67nJo
Grimmspeed Turbo to Downpipes Gasket: amzn.to/2ShP9U1
FP Blue HTZ: bit.ly/2zHRbGR
A Journey Through The Universe - Lesion X
/ lesionxbeats
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/a-j-t-t-u
Music promoted by Audio Library • A Journey Through The ...
A Magical Journey Through Space by Leonell Cassio
/ leonellcassio
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/a-magical-journey-thro...
Music promoted by Audio Library • A Magical Journey Thro...
Track: Space Lullaby (feat. Clara Sorace) - Iaio [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Space Lullaby (feat. C...
Free Download / Stream: alplus.io/space-lullaby

Пікірлер: 277
@tylerprefontaine1344
@tylerprefontaine1344 4 жыл бұрын
Never get tired of watching your videos. Once again content is 🔥 loving the progress on the car
@Smeedia
@Smeedia 4 жыл бұрын
Thank you! And its definitely been a pain but will be worth it soon enough 🔥😁
@TheBakedPotato8
@TheBakedPotato8 4 жыл бұрын
I own a WRX but still enjoy watching your install videos! XD Keep on keeping on man!!
@Smeedia
@Smeedia 4 жыл бұрын
Still a solid car! Appreciate the support friend!
@FullSlice
@FullSlice 3 жыл бұрын
im new to car modification and to the sti, ive watched pretty much all of your videos and I appreciate your time and effort to explain everything! Sometimes my brain gets frustrated with my lack of knowledge on the vocab and etc. but learning slowly with your guidance!
@Smeedia
@Smeedia 3 жыл бұрын
Glaf that the videos are helping and feel free to shoot any questions over you might have 😁
@jamesdean6696
@jamesdean6696 2 жыл бұрын
Big fan of your work Smeedia! You’ve helped my progress a ton with my build and I’m about to do GS up pipe, FP blue turbo with internal wastegate, Indidia downpipe with the Borla exhaust. Def going to be putting more watch time into your channel and thank you for sharing dude
@Smeedia
@Smeedia 2 жыл бұрын
Anytime and always here to try and help where I can! FP Blue will be a fun set up!
@jamesdean6696
@jamesdean6696 2 жыл бұрын
@@Smeedia any specific tips you’d like to share with my aforementioned project? Anything is welcome and much appreciated :)
@tommanning7337
@tommanning7337 4 жыл бұрын
Best build video series ever!!!!!! Man, can’t wait this is gonna be awesome!!!! 😎👍🏻👍🏻
@Smeedia
@Smeedia 4 жыл бұрын
I'm excited to get the car running to see what it will do! Appreciate the support my man!
@98dc2gsr575
@98dc2gsr575 4 жыл бұрын
Dude hell yeah! Just in time to sneak this video in on my lunch break hahaha. super stoked for you man!
@Smeedia
@Smeedia 4 жыл бұрын
Perfect timing! Appreciate the support my man! 🔥
@WRXMAN-ms2mm
@WRXMAN-ms2mm 4 жыл бұрын
You literally threaded the eye of a needle with that EWG/down pipe install over the axle! Congratulations, great persistence and patience on the install. Isn't great to a have a bud who can pitch in on a moments notice!
@Smeedia
@Smeedia 4 жыл бұрын
It was a lot going on in there but it all got together nicley! The dump tube took a bit to get angled properly 😅
@evlx14
@evlx14 4 жыл бұрын
Well done sir 👊. Really enjoying the build.
@Smeedia
@Smeedia 4 жыл бұрын
Thank you. Its been a pain but going to be worth it soon enough!
@DJ_Driven
@DJ_Driven 4 жыл бұрын
Glad you were able to get it done look forward to the next video! I purchased the same holy header to swap out my Nvidia probably need to pick up that grim speed EWG setup next to get in on all the fun 😂
@Smeedia
@Smeedia 4 жыл бұрын
The EWG is going to be a lot of fun! Can't wait to get it started and tuned to hear the craziness of it!
@DigitalArkServices
@DigitalArkServices 4 жыл бұрын
Tanner putting in work. Nice job on the FP Blue Goblin install. Stock location turbo installation can sometimes be a problem, but there's even problems with rotated installation as well.
@Smeedia
@Smeedia 4 жыл бұрын
I've only run into one problem so far and the blue seems to stick out a little father location wise so having to modify a few things but wetr super close!
@dougcastle1785
@dougcastle1785 2 жыл бұрын
Can you plz explain what you had to modify?? I am about to buy this and don’t want a huge headache
@BlazeOn88
@BlazeOn88 4 жыл бұрын
Great video. Can't wait for it to be done. I really wanna hear that loud exhaust. And as for the final nut on the turbo, it could have been worse. You could have cross threaded it.
@Smeedia
@Smeedia 4 жыл бұрын
I was trying so hard to not cross thread it 😅 but glad that its done and I can wait to bolt it back up!!!!
@unpredictable1809
@unpredictable1809 Жыл бұрын
How is it that i just watched all your latest videos and this popped out of no where 😆 old ass video but so inspirational 😊
@fritziepup
@fritziepup 4 жыл бұрын
I just am in shock yet AGAIN. I just got that exact same TIAL EWG (though Purple!) and Grimmspeed Blackened UpPipe in YESTERDAY. However, am not sure exactly how to do the install along with the Cyl4 Getadome Cooling mod, COBB AoS and 1 Step Colder NGK Plugs. Since I am pulling the TMIC off, may as well do all of this together, and put the 3" Downpipe back on. My tuner wants me at 1 bar (14.5psi) with the Green/Black/Blue. And as you said, you WILL need assistance putting the springpack in and tightening down. I'm glad you clarified about the H20 ports, as I wasn't 100% sure if it was needed in Street applications. Thank you SO MUCH for showing the proper orientation though, as that was where I was confused on!
@Smeedia
@Smeedia 4 жыл бұрын
Glad that it helped! The springs were awful to push back in, I was somehow able to so it alone 😅 and I've got install videos on everything you listed so hopefully they can be of some assistance!
@jbuckley21
@jbuckley21 4 жыл бұрын
@@Smeedia hand clamp it, less stress
@Smeedia
@Smeedia 4 жыл бұрын
Did not have one big enough, thought mt vise would work but it was like an inch too small 😅
@BluPrynt78
@BluPrynt78 4 жыл бұрын
I have felt that pain/frustration brutha........most recently! 😂 Great job so far!
@Smeedia
@Smeedia 4 жыл бұрын
Lol its a struggle at times 😅
@miggydizon
@miggydizon 4 жыл бұрын
Oh man , the response is gonna be a lot better with the wastegate bro. Awesome episode.
@Smeedia
@Smeedia 4 жыл бұрын
The tuner said he would have really good control over the boost with the waste gate and boost. I'm pumped to see what the car will do 😍
@miggydizon
@miggydizon 4 жыл бұрын
@@Smeedia care for some ewg flutter o kind sir 💨😈
@squiggsgarage8601
@squiggsgarage8601 4 жыл бұрын
Use a hand vacuum pump on the top port of the EWG to pull the valve up and it will make installing it on to the the up pipe much easier as the gate will be in the open position not closed. Also but the gate into a vice when adding spring and closing it back up carefully. 👍
@Smeedia
@Smeedia 4 жыл бұрын
Did not even think of doing that! That would have made it 1000x easier! Doing this next time 😅
@PancakePigeon
@PancakePigeon 3 жыл бұрын
Love to see a video of this being done to the 2015+ FA's
@Smeedia
@Smeedia 3 жыл бұрын
If i find someone doing it ill try and record it 🙏
@bad_puppy_6740
@bad_puppy_6740 4 жыл бұрын
Great how-to!
@Smeedia
@Smeedia 4 жыл бұрын
Thank you! 😁
@jeremyf7417
@jeremyf7417 4 жыл бұрын
Hope your resting today bro! Took a few naps during your ads! Lol hope that helps 😅😅
@Smeedia
@Smeedia 4 жыл бұрын
Everything helps! Greatly appreciate the support and no rest yet have been grinding to get this thing back together and running again 🔥😁
@bighitmayfield646
@bighitmayfield646 4 жыл бұрын
Can't wait to start my career as a police officer. I'll start to bring money in to buy parts😁
@Smeedia
@Smeedia 4 жыл бұрын
Yessssss, don't pull me over though 😅
@bighitmayfield646
@bighitmayfield646 4 жыл бұрын
@@Smeedia 🤣
@odszza
@odszza 3 жыл бұрын
I’m here with ya doing the same!
@maverick2242
@maverick2242 4 жыл бұрын
Good job dude, 🤘
@Smeedia
@Smeedia 4 жыл бұрын
Thank you! 😁
@TheE3R
@TheE3R 4 жыл бұрын
Yeahhhhh buddy!, that beast getting transformed, mannn always a bolt messing around, FACTS...I finished the installation of my downpipe...Jeezzzzzz me and my brother-in-law were struggling putting back that top mount intercooler, and the red hose its chewed up, and on top of that, the grimmspeed silicone couplers i ordered its on back order.
@Smeedia
@Smeedia 4 жыл бұрын
The install of the OEM Top Mount is actually awful, that was one of the reasons I swapped to the FMIC 😅
@davidwhelan4709
@davidwhelan4709 4 жыл бұрын
much better than all of the videos of people trying to vlog their life rather than making a video on actually installing the wastegate...
@Smeedia
@Smeedia 4 жыл бұрын
Trying to keep the videos mainly informational 🔥
@omgtrey
@omgtrey 4 жыл бұрын
Getting closer and closer to that tune date! Ouuuuu!!!
@omgtrey
@omgtrey 4 жыл бұрын
Looking good, boss! Btw- tagged you in my dyno chart on insta! 362awhp and 344wtq
@Smeedia
@Smeedia 4 жыл бұрын
I saw that! Looks like it came out great! 😍
@omgtrey
@omgtrey 4 жыл бұрын
@@Smeedia it's also a lot louder lol, can't wait to hear his! Something I didn't expect, my mileage doubled lol, pretty cool. Also, how quickly the turbo spools was a surprise. Definitely pulls you into the seat
@Smeedia
@Smeedia 4 жыл бұрын
Your milage doubled?!
@richardvalentin584
@richardvalentin584 8 ай бұрын
Good video.. the oil feed line go where the factory one go behind the right head to the turbo?
@xsiickshotx3631
@xsiickshotx3631 4 жыл бұрын
Never clicked on a vid so fast! Let’s goo!
@Smeedia
@Smeedia 4 жыл бұрын
Appreciate the support my man 🔥😁
@gregkump3639
@gregkump3639 2 жыл бұрын
Use 2 or 3 longer screws (temp) to get supplied 3 or 4 screws to reach threads. Continue tightening all 6. Change longer screws to provided screws. Tighten all 6 and torque. Done.
@jbarnhill50
@jbarnhill50 3 жыл бұрын
I have the exact same tial mvr 44 I love it I have 14psi spring on my legacy. But im running the garret gtx3076r with external dump pipe in wanting to recur my dump tube its so loud. But next time you have to go buy a cheap wood clamp they open up really wide and make it very easy to install aprings.but love the videos you do.
@Smeedia
@Smeedia 3 жыл бұрын
Definitely going tk have to snag one, have had to press these things down by hand too many times now 😅😅😅
@tmos8
@tmos8 11 ай бұрын
Hey, any issues with this? My tuner recommended FP Blue but... I am not super certain how I feel about them / for the long term lasting, as well? Thanks for your time, if you see/reply to this!!!
@ralpheezy
@ralpheezy 4 жыл бұрын
Can you use the same downpipe with this turbo? Also, will you be routing your dump tube to rejoin the main exhaust, or will you be doing an atmospheric dump?
@Smeedia
@Smeedia 4 жыл бұрын
It is atmospheric dump and yes I will be using the same downpipe 😁
@zacheryrodriguez2678
@zacheryrodriguez2678 3 жыл бұрын
So I’ve been watching videos on the Down pipe, waste gate videos and how you need the waste gate for boost creep mitigation. Do you only run a EWG when you have an aftermarket turbo or can you do it with a stock turbo stage 2 set up? I’ve seen all other j pipe installs typically Catless and no one runs an EWG
@Smeedia
@Smeedia 3 жыл бұрын
You can run an EWG with stock turbo. For the most part there's not a huge need to but it will still help with boost control
@maker000
@maker000 3 жыл бұрын
I use a C-clamp to close external wastegates, they can be a huge PIA lol, exciting bruv! Lol, when you're; "like it's already dark out... I've been at this for about 5 hours now" -Story of every Subie modders life!
@Smeedia
@Smeedia 3 жыл бұрын
My C lamps were 1/4" too small 😖 and for real right! 😅
@maker000
@maker000 3 жыл бұрын
@@Smeedia OF COURSE THEY WERE, god life is always like that, kinda like how I'm missing about ten variations of 12mm sockets🤣🤣
@fritziepup
@fritziepup 4 жыл бұрын
One thing I want to confirm with this too since you did it all.. I have the COBB 3-Port EBC, and see that there are only 2 inputs from the EWG in. I see that in yours you sealed up the remaining Air Ports with seals/tape. Also really love how the Dump Tube fits exactly over the axle! I just want to confirm that you didn't use the H20 ports on the TIAL, and only needed the Top, and one single side port for boost feed lines? Keep up the great work!
@Smeedia
@Smeedia 4 жыл бұрын
Correct, I did not use the H2O ports at all and the last port on the EBCS goes back to the turbo inlet 😁
@fritziepup
@fritziepup 4 жыл бұрын
@@Smeedia I noticed on the 3Port manual there's a T-juncture that is required from the bottom of the EWG to Port 1 (which is also the boost source on the turbo). I'm getting ready to rip half this stuff apart to get everything installed, and want to make sure I have all the parts needed. Is there a factory/stock T-juncture anywhere from the Turbo source to the factory solenoid? Or is this something I'll need to add myself?
@Smeedia
@Smeedia 4 жыл бұрын
I had to go buy one, I got a box of Ts for about $4 that had a lot of different sizes from my local auto parts store
@fritziepup
@fritziepup 4 жыл бұрын
@@Smeedia Welp, looks I'll be having to make a trek out then! HOPEFULLY I have everything else needed, but even in all pre-planning, there's always something else you'll wind up needing! Thanks again!
@noahtierney9258
@noahtierney9258 Жыл бұрын
had the same problem with the last bolt on my catless downpipe just been running 4 bolts😭 gonna do this though
@santostuner
@santostuner 3 жыл бұрын
In order to do the external wastegate do you need an aftermarket turbo like the fp blue? Or can you do the external wastegate with the stock turbo?
@Smeedia
@Smeedia 3 жыл бұрын
You can use a stock turbo you would just need this 🙏 www.grimmspeed.com/universal-internal-wastegate-bracket/
@spdkills83
@spdkills83 3 жыл бұрын
Considering a blue for myself, did you get the 84mm flow advancement port option and also is yours coated/ported? Thank you
@Smeedia
@Smeedia 3 жыл бұрын
I did not, I had thr bare basic lowest trim option possible on my blue, it did fantastic 🙏
@spdkills83
@spdkills83 3 жыл бұрын
@@Smeedia Awesome man, looking hard at this one or the DOM 1.5 XTR for my future goals. Thank you for the reply.
@Smeedia
@Smeedia 3 жыл бұрын
My room mate uses the 1.5XTR and that turbo RIPS!
@jonathanvia9788
@jonathanvia9788 3 жыл бұрын
you should do a diy video for the fuel pump hotwire using the factory pump controller! if you aren't already using the iwire kit lol
@Smeedia
@Smeedia 3 жыл бұрын
About to install the Iwire kit today actually 😅
@05stiguy
@05stiguy 3 жыл бұрын
Skipped over the only part I needed 🙃🤣how’d you guys tighten that nut under the down pipe? I also grinded off the flange but can’t get any socket on there. You just wrench it on from below?
@Smeedia
@Smeedia 3 жыл бұрын
Just used a wrench 🙏 lol sorry, but yes the flange on the nut wouldent allows it to thread on 😅
@jamesew82
@jamesew82 3 жыл бұрын
Decided to tackle this myself. This video is a big help, thanks! However, what hoses connect to the wastegate? The one from the ebcs?
@Smeedia
@Smeedia 3 жыл бұрын
There are two diffrent ways to route it, double check with your tuner on how they prefer to have it 🙏😁
@dougcastle1785
@dougcastle1785 2 жыл бұрын
Was the turbo direct bolt on or did you need to do modifications to make it fit?
@fritziepup
@fritziepup 4 жыл бұрын
One thing I wanted to add.. Is it safe leaving the input for the bottom, the nut pressed up against the coolant hose like that? Mine looks exactly the same in this config, but just am not sure how comfortable I am leaving that input nut lodged against the heat shielding on that pipe, even though it's all secure. Would there be anything against using the bottom fitting instead? Just for a bit of added security?
@Smeedia
@Smeedia 4 жыл бұрын
You can use the bottom fitting, this was just the configuration that I used 😁
@MrHanzda
@MrHanzda 4 жыл бұрын
Oil feed line is gonna be connected from avcs solenoid top with new fitting from fp and factory hard line is gonna be capped per fp, I went through the same dilemma and called fp to guide me to the right path.
@Smeedia
@Smeedia 4 жыл бұрын
I figured out how to connect the line but I had so much extra line I had no idea what to do with the rest of it 😅
@adamswartz7670
@adamswartz7670 4 жыл бұрын
MrHanzda type 2 setup correct? I just did this on my 2017 sti. The oil line goes to the front passenger side AVCS correct?, in which is running a type 2 setup. Please correct me if I am wrong
@fritziepup
@fritziepup 4 жыл бұрын
One thing about the EWG I'm curious to know how you did.. Did you need to use a bracket on that turbo to hold the wastegate on the FP (or any Factory for that matter) closed?
@Smeedia
@Smeedia 4 жыл бұрын
The IWG is welded shut on this FP Blue, but if yours is not then you'll need the bracket
@gubbilo1
@gubbilo1 3 жыл бұрын
Just finished my almost exact setup on my 17 sti do you think it's OK to prime the turbo and system then start the car not drive it. I just wanted to burb just coolant without the base tune yet won't be driven my dyno date is still 4 weeks out but wanted to get all the prep work before hand.
@Smeedia
@Smeedia 3 жыл бұрын
You should be ok to just start it, at idle it can compensate well enough to burp the car
@gubbilo1
@gubbilo1 3 жыл бұрын
How do you like the blue I'm searching for a stock bolt on upgrade at the moment for my 17 sti,trying to find a good balance turbo stock bolt on with my external Wastegate also going stock internals nothing crazy. I figured get it done now while I have everything ripped apart doing fueling mods.
@Smeedia
@Smeedia 3 жыл бұрын
Honestly I love it, check out the dyno video if you havent already seen it. Thr turbo pulls strong, great for stock block, had capability for more and is a great turbo for DD
@johnpost9868
@johnpost9868 3 жыл бұрын
Okay man you left me hanging lol . How did u tighten that bolt I am literally stuck on the same bolt . Just need to tighten that bolt put on my front mount and turbo blanket and I'm done
@Smeedia
@Smeedia 3 жыл бұрын
We ground down the flange around the bolt, it was so tight we wouldent get it to go on stright because of the flange around thr nut 😖
@berserk7511
@berserk7511 3 жыл бұрын
What housing did you get on the FP blue? The 58mm or the 84mm compressor cover?
@Smeedia
@Smeedia 3 жыл бұрын
TBH I don't remember this is the one I had www.rallysportdirect.com/part/turbos/2025050-forced-performance-blue-htz-turbocharger?gclid=Cj0KCQiA_qD_BRDiARIsANjZ2LCo_O02yXLPz-MunkoiR0WdMGSO0bxbZnhG9ukxCG5yG1l8Y1jLFGUaAqNhEALw_wcB
@bradgreen987
@bradgreen987 4 жыл бұрын
What's the benefit of an external waste gate over an internal one? Plus the $$ difference for you. Really interesting rebuild to follow. Thx
@Smeedia
@Smeedia 4 жыл бұрын
Gives the tuner better control over the boost parameters and eliminates any possibility for boost creep 😁
@tonyperez8594
@tonyperez8594 2 жыл бұрын
What tool did you use to tighten the bolt you were having trouble with? I'm trying to drop my DP without removing the EWG. Unfortunately, I only have a 14mm ratchet wrench and the box end won't fit. Wondering if a standard box end wrench fits.
@Smeedia
@Smeedia 2 жыл бұрын
The world's smallest 14mm box wrench I could find 😬
@tonyperez8594
@tonyperez8594 2 жыл бұрын
@@Smeedia thanks. Just picked up a stubby 14mm.
@stasethridge6619
@stasethridge6619 2 жыл бұрын
I see you got your trusty vape with you, I always hit mine while working on my sti 🤣👍
@Smeedia
@Smeedia 2 жыл бұрын
Lol my attempt at quiting smoking 😅
@flgavilan2002
@flgavilan2002 4 жыл бұрын
Wich turbo blanket did you go with? I was going to buy one but fp told me that they recommend it. 🤷‍♂️
@Smeedia
@Smeedia 4 жыл бұрын
I'm just using the steam speed one from my OE Turbo lol
@gubbilo1
@gubbilo1 3 жыл бұрын
Hey what size turbo blanket would fit the FP blue mines going in tomorrow!. Will any sti stock turbo size blanket fit?
@Smeedia
@Smeedia 3 жыл бұрын
Yessir! An OE Size will fit 🔥😁
@fermonge8296
@fermonge8296 2 жыл бұрын
Tanner, How do you like your fp blue turbo, I want to for my fa20 any thoughts on headers and meth injection? My tuner wants me to add meth injection if I add the turbo
@Smeedia
@Smeedia 2 жыл бұрын
Loved my FP Blue, really good little street turbo 😁 If you have access to E85 do that if not then meth is the way 🔥 For header snag grimmspeed or Killer B 💪
@gubbilo1
@gubbilo1 3 жыл бұрын
I just ordered the same turbo and did the 1050 injectors today wasn't as bad as I thought.Im on a budget att he moment is it ok to upgrade to the fp blue with stock rails and lines,will be getting them later down the line.I won't be running E85 just 93 can't get e85 around my area closest spot about 75 miles away only looking to get closest to 400hp as possible on stock internals have all supported bolt on already as your how to get 350 on sti video.
@Smeedia
@Smeedia 3 жыл бұрын
Gling to be a little of a challenge hitting 400, the heads will hold you back and so will a single fuel pump but people have done it before 🙏
@85nscarola
@85nscarola Жыл бұрын
Was just doing this last night. Trying to get an fp green to fit. Still have to get the downpipe on today and I can’t even see the bottom stud w the wastegate there. Hopefully it goes on. Gonna grind the nut before I do anything else. I swear if I have any leaks I am just going to be a broken man at that point.
@Smeedia
@Smeedia Жыл бұрын
It can definitely be a pia, what downpipe are you using?
@85nscarola
@85nscarola Жыл бұрын
@@Smeedia yeah def was the 4 times I’ve done it in the last 2 days lol. Using a cnt downpipe. Air tested everything. Had the v bands leaking badly. Sprayed them w copper gasket. Fixed most of it. Then had the uppipe to turbo leaking. Used permaseal copper silicon on it. Letting it cure overnight and air test tomorrow. This has been an adventure.
@JoseManzo-un9zc
@JoseManzo-un9zc Жыл бұрын
So I'm currently having a shop install an fp blue in my 2013 wrx. But they told me they're having an issue the turbo is hitting the secondary air valves and I might have to remove the air valves. It just sounds odd cuz I've read online people installing fp blues and never heard them have remove them. Any suggestions since I live in California and with strict emissions removing them is not an option. TIA
@FuryJDM
@FuryJDM 4 жыл бұрын
Similar to my setup. I went with TurboSmart 44 EWG, Grimmspeed UpPipe, Killer Bee Expansion tank, Killer Bee holy Header. Don't miss that install either. lol You thought about throwing on the ETS MaxFlow header?
@Smeedia
@Smeedia 4 жыл бұрын
I've seen it and was considering getting it but don't need the amount of flow that the header will provide 😅
@dylanharris8707
@dylanharris8707 3 жыл бұрын
Where are you located man? I do custom fabrication all the time and really enjoy your videos
@Smeedia
@Smeedia 3 жыл бұрын
In the puyallup/Tacoma area 😁
@patricknbrooks11
@patricknbrooks11 4 жыл бұрын
Stock turbo with an ewg set up will I have to have my stock flap welded shut? What do you recommend? I could get a block off plate until I am ready for a new turbo as well. Thanks in advance
@Smeedia
@Smeedia 4 жыл бұрын
They make Wastegate brackets that keep it shut so you don't have to weld it 😁
@patricknbrooks11
@patricknbrooks11 4 жыл бұрын
Smeedia thanks so much for answering my dumb questions man huge help and relief of stress... Time to order some smeedia products along with my grimmspeed bracket 😎
@Smeedia
@Smeedia 4 жыл бұрын
Not dumb questions, perfertly normal one 🔥 the vracket is cheap maybe like $30 or so
@MultiKrupt
@MultiKrupt 3 жыл бұрын
My vband clamp doesn’t close all the way like yours but I am able to tighten it pretty solid. Does it matter if it’s touching on both ends or is it fine where I can leave a small gap?
@Smeedia
@Smeedia 3 жыл бұрын
There should be a small gap between thr two clamps 🙏
@MultiKrupt
@MultiKrupt 3 жыл бұрын
Smeedia sweeeet thanks man! I was getting so worried lol love the videos!
@chrislomangino4335
@chrislomangino4335 4 жыл бұрын
My tuner recommended the FP blue can’t decide between that and the Cobb 20g
@Smeedia
@Smeedia 4 жыл бұрын
Curious to see what the blue will do, hopefully helps provide you with some clarity!
@chrislomangino4335
@chrislomangino4335 4 жыл бұрын
Can’t wait to see.
@eddiey517
@eddiey517 2 жыл бұрын
Would there’s be an issue running a Ewg setup on the stock sti turbo I have a 2018 I have a catless a downpipe and I am at a crossroads of whether to put a catted dp or just doing a ewg set up what would your input be?
@Smeedia
@Smeedia 2 жыл бұрын
Totally fine to do so, you'll just need to block off the IWG with either a bracket or weld it shut 🙏 Personally I run a catted downpipe with EWG
@eddiey517
@eddiey517 2 жыл бұрын
Thank you so much for your help!
@SoulsSave
@SoulsSave 2 жыл бұрын
Assuming you had the AOS street series. How did you connect the bottom side port vent hose to y fitting > to the top of the block. The turbo air outlet (that connects to the Intercooler) is in the way? I manage to squeezed it in there but it is slightly bent.
@Smeedia
@Smeedia 2 жыл бұрын
I used a shorter line off the block breather to compensate so it would sit lower 🙏
@SoulsSave
@SoulsSave 2 жыл бұрын
@@Smeedia I thought of that too but it seems like it wouldn’t make much of a difference. I’ll try it out anyway! The fact that you still respond to these old vids is awesome bro. I appreciate; you’re the best!
@Smeedia
@Smeedia 2 жыл бұрын
I try to! Size not are you still tmic?
@donkyuhbuhts540
@donkyuhbuhts540 4 жыл бұрын
Hopefully the ewg dump tube and some of those oil lines to smack or wear holes from rubbing when the engine moves around
@Smeedia
@Smeedia 4 жыл бұрын
It's all pretty secure, I don't think that any of them will wear
@spheno12
@spheno12 3 жыл бұрын
Hey man, do these banjo bolts still got the screens in them and if so are people still removing those or keeping them in place? 09 WRX. Thanks brotha.
@Smeedia
@Smeedia 3 жыл бұрын
They probably do in the AVCS lines, I remove them. Not a huge fan. They'll save your oil system if you have an engine failure but can potentially clog up as well
@spheno12
@spheno12 3 жыл бұрын
@@Smeedia thanks man, I've got to replace the turbski and wanted to make sure. Goin to throw in the cobb DP and Q300 exhaust in to while I'm at it. I appreciate you and your channel man!
@berserk7511
@berserk7511 4 жыл бұрын
Why did you go with the 44mm again? I remember you said it in a previous video just can’t find it lol
@Smeedia
@Smeedia 4 жыл бұрын
Was originally going to use a larger turbo and bought the 44mm but got the FP blue so did not want to re buy an Upipe and EWG lol
@ELSti
@ELSti 3 жыл бұрын
Does the hose from the ebcs go on bottom port and the top port gets vented into the atmosphere?
@Smeedia
@Smeedia 3 жыл бұрын
Going to be different from application to application but grimspeed had a good diagram showing where each port goes 🙏
@joemeyers4125
@joemeyers4125 4 жыл бұрын
I hear that the dump pipes on those external wastegates tend to crack and break the uppipes unless you do a bracket mod on the dump pipe did you do that on the dump pipe?
@Smeedia
@Smeedia 4 жыл бұрын
I did not but knowing that I mill probably do one now 😅
@joemeyers4125
@joemeyers4125 4 жыл бұрын
Erich the tuner over at PREracing did a video on those cracking awsome video its on his channell WILL TUNE FOR TACOS you should check it out
@Smeedia
@Smeedia 4 жыл бұрын
@@joemeyers4125 definitely going to check it out, he tuned my friends outback!
@abdelrahmanalqasmy4733
@abdelrahmanalqasmy4733 4 жыл бұрын
thanks for the video man ,,, FYI, you bolted the upper left up-pipe bracket the wrong way (Up side down) hahahhahah little tip there :D, carry on the great work good luck.
@Smeedia
@Smeedia 4 жыл бұрын
Lol oops, it will still hold 😅 appreciate the tip on that one I might swing back though and fix that😅 appreciate the support!
@abdelrahmanalqasmy4733
@abdelrahmanalqasmy4733 4 жыл бұрын
I wrote the comment half way through the video, since you are not using a heat shield this bracket won't make a difference ahahahhahahahahah, that was a tough install I work on my car as well I feel you bro hahaha.
@abdelrahmanalqasmy4733
@abdelrahmanalqasmy4733 4 жыл бұрын
@@Smeedia It will hold but since you have a blanket instead of the shield you don't have to worry about it. That down pipe though, I have bad memories installing it. ended up cutting a seized bolt, took me an hour to remove one bolt -_-
@Smeedia
@Smeedia 4 жыл бұрын
Oh I know all about sized bolts, tomorroes upload I had to cut off a master cylinder brace from a sized bolt 🙃
@abdelrahmanalqasmy4733
@abdelrahmanalqasmy4733 4 жыл бұрын
@@Smeedia ops hahahhahahah working on cars never easy :D
@joshsimpson1648
@joshsimpson1648 2 жыл бұрын
Do you have an ewg up pipe suggestion now that grimmspeed no longer makes or sells it?
@Smeedia
@Smeedia 2 жыл бұрын
PLM Makes some now 🔥🙏
@jhand01
@jhand01 2 жыл бұрын
So the fp blue is good to run on a 2020 sti? If I’m going with a high flow cat back, would I need a wastegate?
@Smeedia
@Smeedia 2 жыл бұрын
The stock FP wastegate will be fine and great turbo for the car 🥳
@jhand01
@jhand01 2 жыл бұрын
@@Smeedia dude thank you so much!
@cocacola6489
@cocacola6489 4 жыл бұрын
When I swapped out the down pipe on my car it kicked my ass, luckily I got help or else I wouldn’t have got it done
@Smeedia
@Smeedia 4 жыл бұрын
The downpipe is not a fun install, once you add a wastegate in there it gets worse 😅
@juddasoyuf1329
@juddasoyuf1329 Жыл бұрын
Doing this install now and the oil drain line from the bottom of the turbo is just not cooperating. Any tricks or recommendations to get that on?
@Smeedia
@Smeedia Жыл бұрын
Put the drain on the turbo first then slide it down onto the drain 🙏
@thomisonnnnn
@thomisonnnnn 4 жыл бұрын
Dude I feel your pain regarding that lower downpipe bolt. Absolute pain in the butt to install.
@Smeedia
@Smeedia 4 жыл бұрын
The worst part was trying to reach around the EWG to get that darn bolt on the car 🤣🤣🤣
@ralpheezy
@ralpheezy 4 жыл бұрын
Since, it's an extended install process, have you thought of taking the hood off?
@Smeedia
@Smeedia 4 жыл бұрын
Haven't needed to, the hood has not really been in my way at all 😅
@ralpheezy
@ralpheezy 4 жыл бұрын
@@Smeedia Idk, when I'm on one of the sides, I always feel like I'm going to elbow the hood onto the windshield even though the struts won't let it go.
@bruceholinight7978
@bruceholinight7978 4 жыл бұрын
That's the only one ....... that's always the only one , I put that one in first ! Nice patience though ! Usually tools stuck in the wall when I remove the turbo !
@Smeedia
@Smeedia 4 жыл бұрын
That 1 bolt was just killing me lol but glad it went it, the flange kept hitting the downpipe when putting it on 😅
@bruceholinight7978
@bruceholinight7978 4 жыл бұрын
@@Smeedia Once you get behind the wheel and hear that rumble , and see those bashed up knuckle's , you'll forget all about it !
@edwardli3148
@edwardli3148 4 жыл бұрын
do you know the difference between the 38mm and the 44mm for the ewg in terms of power?
@Smeedia
@Smeedia 4 жыл бұрын
The 38 should be used for higher joist applications while the 44 used for lower boost
@edwardli3148
@edwardli3148 4 жыл бұрын
@@Smeedia ok thanks!
@diegosti9741
@diegosti9741 3 жыл бұрын
good afternoon bro , is there any differences between tial 44 and turbosmart 44 wastegate?
@Smeedia
@Smeedia 3 жыл бұрын
Functionality wise they'll do the same thing 🙏 some design differences
@diegosti9741
@diegosti9741 3 жыл бұрын
@@Smeedia thank you so much
@STIJay
@STIJay 3 жыл бұрын
Hey I have a quick question I just Dyno I made 356 on E85 but I want a FP blue turbo I don’t really want to go with the external wastegate how much power you think I will game by just adding the turbo with the internal wastegate or what you recommend
@Smeedia
@Smeedia 3 жыл бұрын
What is the car and whats the full parts list?
@STIJay
@STIJay 3 жыл бұрын
2018 wrx I have full bolt ons
@Smeedia
@Smeedia 3 жыл бұрын
What parts though, FBO has diffrent meanings across the board 😅
@STIJay
@STIJay 3 жыл бұрын
I got Grimm speed Charge and top mount intercooler Tgv and Egr,aos , full cat back, catted downpipe, Perrin oil cooler, tomei headers, ets intake, Cobb boost control,
@STIJay
@STIJay 3 жыл бұрын
Cobb flex fuel
@erickleiva9799
@erickleiva9799 2 жыл бұрын
I found a FP blue for a good price locally. Is there anything I should look for when I go look at it in person?
@Smeedia
@Smeedia 2 жыл бұрын
Just check for axial shaft play 🔥👌
@dougcastle1785
@dougcastle1785 2 жыл бұрын
Hey brother I am gonna attemp to install this. Was it a direct bolt on or did you have to do any modifications? Would appreciate the help
@Smeedia
@Smeedia 2 жыл бұрын
Was direct bolt on 🙏
@UH60xBLACKHAWK
@UH60xBLACKHAWK 3 жыл бұрын
What bracket did you end up using to close the internal wastegate?
@Smeedia
@Smeedia 3 жыл бұрын
I did not, mine IWG was welded shut. But I would suggest the grimmspeed
@UH60xBLACKHAWK
@UH60xBLACKHAWK 3 жыл бұрын
@@Smeedia would it work for the fp blue? Most of what I see is for the VF turbos
@Smeedia
@Smeedia 3 жыл бұрын
Yes it would, you can get your FP blues IWG welded shut from FP when you order the turbo
@fritziepup
@fritziepup 4 жыл бұрын
Ok, since I'm ripping my hair out right now. I'm 99% completed from starting this confidently, but I badly need to know.. HOW DID YOU DO THAT LOWER BOLT? Dude, I have no idea what magic was worked to get that torqued down you did, because with the EWG there, and the angle of the downpipe, I can't even get a socket on it now. I tried using a bendybob thing, and was able to get a BIT of torque before it slipped, and I don't want to try much more. Oh if you can, please tell me how you guys got that bolt tightly in, because I'm so close to being done with this all and want to start it. Everything else is all secured again, and new installs finished. Up-Pipe, Downpipe, EWG, Plugs, AoS, EBC, Getadome Cyl4 Cooling, and Oil/Coolant flush.
@Smeedia
@Smeedia 4 жыл бұрын
So we had to grind down the flange that is on the bolt to get it to fit, the flange was too wide where it kept hitting the downpipe and would not fully seat. If you've got a bench grinder just grind it down a little if now a file will also work. But I feel the pain that bolt was a huge pain!
@stasethridge6619
@stasethridge6619 2 жыл бұрын
I just got my wastegate installed by Tier 1 in liberty lake and I noticed that the top port of my wastegate does not have a rubber line running to it. IS that normal? I know that some wastegates the top port goes to the boost controller and other wastegates you have to vent the top port to atmosphere, Why is that?
@Smeedia
@Smeedia 2 жыл бұрын
Just diffrent set ups for diffrenr boost controller some tuners have it one way while others do that way
@RicondaRacing
@RicondaRacing 2 жыл бұрын
would have been nice seeing how to route the hoses
@Smeedia
@Smeedia 2 жыл бұрын
There are multiple ways to do so, but I did covet it I'm more recent videos with the 05 STI. But this is not a bad idea for a video
@paulnolan7509
@paulnolan7509 4 жыл бұрын
You're going to melt that inner CV boot cover where that dump pipe is. If it can be rotated up a bit more, and perhaps consider wrapping it....?
@Smeedia
@Smeedia 4 жыл бұрын
It can rotate up anymore without hitting the trans, the dump tube is ceramic coated soit should be alright, but it does look like its cutting it close
@paulnolan7509
@paulnolan7509 4 жыл бұрын
@@Smeedia Keep an eye on that boot either way, those dumps can get hotter than you think.
@Smeedia
@Smeedia 4 жыл бұрын
Going to be checking it routinely to make sure, if I start to see it melting going to try and reroute it or have a customer dump tube fabricated
@octurbojoe
@octurbojoe 4 жыл бұрын
I recommend priming the turbo separate from the engine to make sure oil is positively feeding its bearings. The way I did it was leave the turbo feed line disconnected and routed into an empty water bottle, disconnected the crank angle sensor, left the fuel pump fuse off, and then left spark plugs removed since I was gonna replace them with 1-step colders. Last, fill oil. Using a remote hand-held starter button, I would crank the engine until I see oil coming out of the feed line and filling up the water bottle. Once it did, I installed the feed line onto the turbo and crank over again inside the car until the oil light on the dash disappeared. That also took a few series of cranking, even after priming the turbo feed line. This just gives me a warm and fuzzy feeling that my turbo is [visually] fed oil to its bearings. Everyone does it differently but some never prime the oil period, and wondered why their turbo died 2 months after installation. After that, fill coolant, replace fuse, crank angle sensor, install plugs, then start, bleed coolant, check for leaks.
@Smeedia
@Smeedia 4 жыл бұрын
I filled the turbo wil oil and spun the wheel until I saw it start to come out of the turbo drain port but may end up doing this as well to make sure everything is happy 😅
@adamswartz7670
@adamswartz7670 4 жыл бұрын
OCTurboJoe , what’s up brother. Question, since you have a VAB STI did you use the type 2 oil routing, or type 1. I installed type 2 since I have dual AVCS, and we plumbed the oil line off the passenger side front AVCS. It appears in this video, and a discussion I had with Smeedia (Tanner), he installed his oil feed in the type 1 setup.
@Smeedia
@Smeedia 4 жыл бұрын
Called FP, verified that type 1 set up with the car is good. Both the FP Blue and VF48 are hournel bearing turbos so the amount of oil being fed from the back of the block is more than sufficient to provide enough lubrication for the turbo. If I can avoid pulling oil from the AVCS I'd prefer doing it that way.
@octurbojoe
@octurbojoe 4 жыл бұрын
@@adamswartz7670 I installed IAGs oil feed line kit but my factory oil feed line is configuration is Type 1 (two separate oil lines for turbo and AVCS) but I converted it to Type 2 where both the turbo and front passenger intake AVCS is fed from the back of the block.
@octurbojoe
@octurbojoe 4 жыл бұрын
@@Smeedia Awesome! Thanks for verifying to everyone Tanner!
@basangtiti_31
@basangtiti_31 2 жыл бұрын
can i put gs uppipe to tomei el headers?
@Smeedia
@Smeedia 2 жыл бұрын
As long as the header is 3 bolt 🔥🙏
@godgivensti9745
@godgivensti9745 3 жыл бұрын
Trying to decide which fuel pump/ injectors fuel and parts will need for fuel. Do want to be set up to run e85 down the road and need help with turbo to go with i already have a tail 38mm external wastegate. Now I'm wonder if I should go with ball bearing fp green or ball bearing fp black ported and coated still on stock block on 2020 sti. Going to be doing reliability mods first like killer bee oil pickup and pan tray and cooling mods equal killer b holy headers. Would like to get your opinion plus knowledge I may need. Thanks for your help. And when this engine gets done ill be looking for a 07 sti to drop this build in and then putting built long block with stroker in 2020 and going rotated been talking with iag so would be nice when you get eg33 and mine is done we hit the track or get a bunch of subscribers together on track.
@Smeedia
@Smeedia 3 жыл бұрын
Whats your end end goal for power?
@Smeedia
@Smeedia 3 жыл бұрын
And a track day would definitely be awesome!
@godgivensti9745
@godgivensti9745 3 жыл бұрын
@@Smeedia with this build im thinking 450 to 500 hp with fp ball bearing green and also going with ethanol. Tuner suggested 320 AEM pump on id 1050 but didn't you run out of duty cycle on yours or ran out of cam? They suggest a cobb fuel rail but I've had my heart set i iag. Also do you know of a good low profile ramp ive been looking and don't really see one that will give me room to work
@Smeedia
@Smeedia 3 жыл бұрын
Get the radium duel pump set up, will definitely make fueling a ton easier later on for, and at minimum ID1300's we capped my 1050s at 400 WHP and started running out of cam.
@godgivensti9745
@godgivensti9745 3 жыл бұрын
@@Smeedia now with that duel pump set up are you talking about with new hanger and all. I'm try to look up which one we are talking about. And what all do I need for a front mount or does ets give you all you need wondering cause I'm getting aggravated with top mount and want to just go ahead get the 3 1/2 front mount get it tuned so u can do the other installs easier. And praying you get you car figured out before tune day.
@jaryamir7792
@jaryamir7792 4 жыл бұрын
Can i use that uppipe in stock turbo?
@Smeedia
@Smeedia 4 жыл бұрын
Yes you can 😁
@victorcalel3559
@victorcalel3559 3 жыл бұрын
Green red and black make 1.3 bar which is 18.85 psi is that what u running
@Smeedia
@Smeedia 3 жыл бұрын
I'm running .9 Bar in mine
@JradkunPnoy
@JradkunPnoy 3 жыл бұрын
Catted downpipe? So it clears it with the ewg dump tube?
@Smeedia
@Smeedia 3 жыл бұрын
Yessir, can verify it clears with both the Cobb and grimmspeed
@JradkunPnoy
@JradkunPnoy 3 жыл бұрын
@@Smeedia do you think it will clear with my invidua catted downpipe? As the cat is towards near the turbo unlike the cobb one.
@Smeedia
@Smeedia 3 жыл бұрын
Not sure with that one, I'm sure there's a way to rotate the dump tube to accommodate the cat
@nickwhitaker3540
@nickwhitaker3540 4 жыл бұрын
the oil feed doesnt come off the AVCS solenoid?
@Smeedia
@Smeedia 4 жыл бұрын
Not on the newer models, there is a dedicated oil galley for the turbo
@adamswartz7670
@adamswartz7670 4 жыл бұрын
Nick Whitaker that’s how I did it. 2017 STI. Type 2 for newer sti with AVCS
@MrJames6891
@MrJames6891 4 жыл бұрын
Does your wg open before spring pressure?
@Smeedia
@Smeedia 4 жыл бұрын
No, should open as soon as it sees .9 bar
@MrJames6891
@MrJames6891 4 жыл бұрын
@@Smeedia Since Ive had my gen v turbosmart ewg, It has opened by 10psi and I have the 14psi spring installed. Only thing Turbosmart said was to ship it to them for inspection or if the intake and exhaust have different pressure, the gate will open early
@Smeedia
@Smeedia 4 жыл бұрын
How are your vaccumm lines ran on the car for the EWG?
@MrJames6891
@MrJames6891 4 жыл бұрын
@@Smeedia cobb bcs. port 3 to intake. port 1 T's to compressor and bottom of gate. port 2 to top of gate. grimmspeed catted downpipe to oem mid section. 2.5". Nameless axleback. Cobb intake, perrin inlet
@Smeedia
@Smeedia 4 жыл бұрын
Same as mine. Odd, only thing I can think of is maybe a wrong spring ended up in there?
@roxythekrx7190
@roxythekrx7190 10 ай бұрын
watch a donut video about 22bs or watch a 3 year old smeedia video welp im here xD
@roxythekrx7190
@roxythekrx7190 10 ай бұрын
7:38 I found a juul when you where doing the oil lines xD
@BushidoPhoto
@BushidoPhoto 4 жыл бұрын
Got to put Matt in the video next time!
@Smeedia
@Smeedia 4 жыл бұрын
I'll make sure to have Matt make a cameo 😅
@bambam3417
@bambam3417 3 жыл бұрын
Do you still have this up pipe for sale?
@Smeedia
@Smeedia 3 жыл бұрын
Unfortunately I do not 🙏
@bambam3417
@bambam3417 3 жыл бұрын
@@Smeedia thanks anyway, this EWG up pipe is either discontinued or out of stock...appreciate the quick response keep up the good work!
@Smeedia
@Smeedia 3 жыл бұрын
It's been discontinued I think PLM makes them though
@bambam3417
@bambam3417 3 жыл бұрын
@@Smeedia thanks brother!
@tannyshim3074
@tannyshim3074 4 жыл бұрын
7psi-20psi spring is quite the rate of body weight can handle . But if 20psi-40psi spring rate. It’s horrible .......... even with 2 -3person
@Smeedia
@Smeedia 4 жыл бұрын
I couldn't imagine i would need a large vise to be able to get that compressed 🤣
@matthewlynn1286
@matthewlynn1286 4 жыл бұрын
Man you need some quick-jacks so you don’t have to fight to get under the car
@Smeedia
@Smeedia 4 жыл бұрын
The lady and I were just talking about getting a set!
@matthewlynn1286
@matthewlynn1286 4 жыл бұрын
I wanna set myself for my ‘18 sti
@mryony23able
@mryony23able 3 жыл бұрын
The mistake that we all make, if you want to update your car with good stuff, the first thing you should do is to forge your engine, before installing all the good stuff, I think it is cheaper, remember that those engines are 300 hp,
@Smeedia
@Smeedia 3 жыл бұрын
Not entirely true, whole a engine with forged internals is a good idea its not always 100% needed. Ive been at 400WHP on the non Tupe RA short block months with no issues other than the clutch. And the RA shortblocks can handle significantly more power. Really goong tk come down to what your power goal is for the car
@roybrown7717
@roybrown7717 4 жыл бұрын
hope this works out lol
@Smeedia
@Smeedia 4 жыл бұрын
Same 😅😅😅
@roybrown7717
@roybrown7717 4 жыл бұрын
@@Smeedia meant the sti bro lol but this endeavor too
@Smeedia
@Smeedia 4 жыл бұрын
Lol I also meant the STI 👀
@roybrown7717
@roybrown7717 4 жыл бұрын
@@Smeedia I'm the smartest dumb person you'll never talk to
@markjohnson3737
@markjohnson3737 Жыл бұрын
I bet the car won't be as loud as an H6 with fender exit...
How to Delete your EVAP Solenoid (STI)
13:25
Smeedia
Рет қаралды 55 М.
Haha😂 Power💪 #trending #funny #viral #shorts
00:18
Reaction Station TV
Рет қаралды 10 МЛН
Василиса наняла личного массажиста 😂 #shorts
00:22
Денис Кукояка
Рет қаралды 8 МЛН
Which one of them is cooler?😎 @potapova_blog
00:45
Filaretiki
Рет қаралды 10 МЛН
Everything You Need To Know About Wastegates!
10:17
Smeedia
Рет қаралды 84 М.
Stage 3+ On The STI | Part 3 | New Part?!
20:56
Be Above Average
Рет қаралды 15 М.
WRX FP Blue Turbo Upgrade, is it worth it?
8:26
Altek
Рет қаралды 26 М.
STI TGV Delete/Fuel Rail/Fuel Injector Assembly
13:59
Smeedia
Рет қаралды 35 М.
TURBO FLUTTER and BLOW OFF VALVES explained in DETAIL - BOOST SCHOOL #8
15:29
driving 4 answers
Рет қаралды 1,4 МЛН
Ride a motorbike in your own family way 😂🤣 Mong family #shorts
0:10
3rd time’s a charm 😅 #bugatti #dodge #daytona #americanmuscle #muscle #musclecar
0:31