Stick Shift Procharged COYOTE on 93 Octane and E85!! Crazy Power!

[@forcedair92gt94]

@ 3:21 I love how you threw that in and then kept going. No explaination need LOL. That's how it should be.

[@foxxrider250r]

Yeah caught that too lol. #transparency

[@mrbdrm2]

Rob is a really nice guy. he is tuning my car with P1x Even though I'm sending him a request after a year of my original request (i didnt install the map for life reasons) he still answer and send a new file! no questions asked. Great support there. mrbdrm

[@tonykickerkomp1653]

Im a 6 speed guy. I like the challenge of beating automatic cars. But I gotta say those 10 speed cars are fast

[@crodrc51able]

Tony, yeah, I’ve had manuals all my life. Decided to try this A10 on my GTVert. They are impressive. But I do miss rowing my own.

[@toddsb07]

I've always had manual mustangs, road raced them for 1i years. Now I have a 18 10 speed and love it. Best part of the car!

[@midnight347]

Manual is 1000x the driving experience and it's not close 10 speed or not. I've rode in them they are ok they keep pulling because they have a ton of gears and aggressive gearing but at the end of the day it's still a boring auto that takes 0 skill to drive. It's not for me.

[@BattleKing2Delta]

Yeah man same here. H pattern 'til I'm pushing up daisies lol. Nothing is quite as thrilling or connecting man to machine than an H-pattern gearbox. In my opinion at least.

[@kevinwiltshire2217]

It's nice when you could almost bolt on a thousand horsepower

[@LJRoss-zv8hw]

For how long?

[@crodrc51able]

And it will hold as long as the owner isn’t an imbecile and constantly beating on it. A trip up the rpm’s once in a while with a proper tune and good fuel, she’ll live a good while.

[@LJRoss-zv8hw]

@@crodrc51able , a good while means what?

[@Berto-1117]

@@LJRoss-zv8hw longer than most things out there making 1000hp

[@s550tv8]

@@LJRoss-zv8hw there's people out there w a 2015 mustang that boosted it after literally getting it off running a 1000whp w 180k miles lol

[@drivencrawlformanceRC]

Wow!! PBD does it again and shows crazy power gains!! Much respect for the way you present how each of your presented cars get to their final power numbers. You guys don’t leave any questions about your knowledge of these builds. That alone is why IMO you are on top of things in your industry. Keep it up. Pretty soon you’ll have one of my cars out there.

[@adamquick1116]

What a jump in horsepower!!!

[@paulhudgins5120]

Man that is some serious RWHP & torque, wow that is impressive and sweet procharger package, that is one mean 2018 Mustang GT.

[@MyCricketGirl]

2019 Mustang GT PP2. Typo in the description. In the video he says 2019 which is correct 👍🏼

[@crodrc51able]

Ok, yeah I like the sound of that for my A10. Make mine a straight cut gear. I want mine sounding like an F16 taxing on a runway. 🇺🇸👍🦅💪

[@scottsigmon926]

Wow, that’s impressive! Did that include oil pump gears as well?

[@skullhart]

Yes and crank sprocket

[@onetrickpony5884]

I have a 2019 PP2 with a Vortech and a 3.33 pulley and put down 764 on pump 93.

[@nola504boy1]

3.33 on 93 octane you’re playing with fire! I can’t believe someone tuned it with that pulley on 93.

[@kingdavid6141]

@@nola504boy1 I was about to say the same thing!!

[@midnight347]

What was the tq like 500? Lol. Love how coyote guys never mention torque especially when they're running a centri

[@midnight347]

​@@nola504boy1ppl love to push things on 93 then cry when it blows up. Idk why they don't pony up for some better fuel. At least run boostane my God.

[@onetrickpony5884]

@@midnight347 My car sits a lot as it’s not my daily so I don’t want e85 in it. When it blows I’ll build a motor that can stay on 93 and as for torque it made 593. Either way the centri is coming off as I will be going big single turbo.

[@darthracer777]

I have a D1X Procharger on my '19 GT. 10 spd auto. On E-85. My car was tuned at Trickey Performance in Mustang, Oklahoma. Currently it makes around 840 to the wheels. Not an all out tune.

[@diovalremonde2468]

What fuel system?

[@darthracer777]

@@diovalremonde2468 Fore fuel system. 95 lb. injectors

[@csr801996]

What pulley/boost?

[@darthracer777]

@@csr801996 4.25 drive pulley. No boost gauge. I think tuner told me it was around 16.

[@sergebasque8460]

Totally awesome performance on pump gas also great on E-85.😎👍💪

[@kevinb5717]

Imma need that tune. That's awesome numbers. Hopefully it drives just as great.

[@wellthatdidntwork]

Healthy hp on this set up!!! Damn

[@erichaley3635]

Damn that’s what I need for my 2021 premium GT 6speed car

[@matthewbrown1760]

Awesome power! Would be nice if you disclosed which Procharger model you are using. Judging by a couple comments on here it looks to be a P1X or a D1X. Was hard to see in video.

[@bigbooger7739]

P1x 3.7 pulley

[@ProChargerSuperchargers]

LOVE< LOVE> LOVE

[@djms0061]

Have you dyno one with comp cams 433580(stage2 blower), wanted to know if was worth adding the cams

[@williammustang5328]

Wow amazing awesome job Ken 👍

[@SampurpSCR]

Awesome job guys

[@coyotefury]

Nice car! I thought your not supposed to do dyno pulls in a new clutch until proper break in?

[@adamcarrasco2669]

Ken my question is if that car had a built engine would that S.C be big enough to make 1050 h.p. or would a larger s.c be needed? Thank you for your information.

[@mp289634]

I can’t find any kits available on the website…

[@1of1RTR]

A very nice build 🤙🇺🇸

[@erichaley6776]

Beast mode!!!!

[@devinwilliams9058]

I don’t know if I missed it or not but did you do a video with a 2015 pro charger? Also was it on 93 octane as well?

[@stevekent9276]

I like the idea, but would be a nervous wreck if I was making a pull high into the powerband and then blowing my motor and oil going all over the road. What's the limit on the stock rods?

[@robertdaone]

How does E85 compare the Methanol injection? I was using methanol/water injection on one of my turbo charged vehicles in the past with good results but always wanted to look into E85.

[@tonyb022377]

Procharger everything!!!!!

[@joseperez3788]

Rob is it true this types of superchargers damage the crankshaft on the long run??

[@foxxrider250r]

Dang didn't realize the p1x could make 900. Thought that was d1 territory. What could a d1x do🤨

[@erickbrambila2630]

1100 or so

[@foxxrider250r]

@@erickbrambila2630 dam that's badass

[@Youngsoldier93]

Do you have a link for this kit?

[@ArmaniTheGreat]

If I'm doing a road trip can I keep the 3.7 pulley on and just switch tunes to 93? Or is it recommended to switch pullies. Car will not be driven hard on 93 just until I can put e85 after arriving to destination.

[@stangboy3029]

Just don’t go into boost lol. Just get a tune for 93 on a bigger pulley and a separate tune for E85 for the smaller pulley

[@buddyywilsonn]

One day I'll have enough money to bring my mach 1 mustang to you guys.

[@meanf1502]

What kind of price to do a f150 coyote 4x4 truck so I can spank some cars with a 4x4

[@razorfingers]

Here in Commiefornia all we have is 87 and 91 octane. Is 91 still workable for a supercharger?

[@midnight347]

Yea but you'll obviously make less power. I would use boostane premium you can pull that up to 98 octane and make alot more power alot safer. If you buy in bulk online you can get it about 17 bucks per bottle. That's 17 extra dollars per fill up more to have 98 octane vs 91 imo it's worth that. That stuff is legit.

[@Johnnyroten]

Where is the air filter?

[@PinkeCPA]

Out of curiosity, what’s labor rate associated with a package like this? I see the level 2 package is roughly $8-9K on the website. What kind of OTD cost is there adding labor in on that?

[@lhv8]

Probably with fuel system, Headers and labor it cost around $15K

[@cmdrdredd]

@@lhv8 sounds about right for what I’ve seen others spend on their setups all in. More if you add stuff like axels, drive shaft and the like. Maybe a built transmission lol. It can get crazy on pricing if you take it all the way.

[@michaelschwab9563]

@@lhv8 21

[@yokev_5611]

Just the procharger?

[@TimothyIpmanchilds]

What engine mods?

[@joemyatt3253]

@palm beach dyno how many lbs of boost?

[@micahbrown8259]

How much for that kit on a 2017 Mustang GT 6r80?

[@PalmBeachDyno]

Our Level 2 P1X kits start around $7500, added a link for it below. Give us a call if you need more info or recommendations for the setup 👍🏽 561-571-1173 www.pbdyno.com/PBD-Level-2-2015-2017-Mustang-GT-Procharger-P1X-Supercharger-System-_p_557.html

[@triple87864hh]

Procharger or vortech which do u recommend for a stock motor on 93 trying to make 800rwhp

[@stangboy3029]

You need E85 for that

[@midnight347]

You want big power you need better fuel. If you're gonna limit yourself to 93 your power will also be limited. You can do 700+ easily on 93 tho just gotta tempee those expectations.

[@BulliKid]

Stock block?

[@bigbooger7739]

Yes,stock headers and still has cats

[@BulliKid]

@@bigbooger7739 well that’s amazingly simple.

[@novafire2261]

Supporting mods to tranny?

[@angelo_giachetti]

Is this all boost on a stock engine?

[@bigbooger7739]

Yes

[@csr801996]

What boost was the 3.7 making?

[@michaelschwab9563]

16 I'm guessing since my 4.00 makes 15

[@amgalltheway9493]

Is a tune all I need to run E85 on my phase 2 Roush Supercharger?

[@kingdavid6141]

You probably will need injectors to

[@GR018]

900hp @ the wheel PP2? Dam. That's a badass car. Also, that type of supercharger allows the strut tower member brace to stay in place. 👍

[@calvinmauney5669]

Centrifugal blowers you can still use your strut tower brace. ( procharger and Vortech supercharger)

[@GR018]

@@calvinmauney5669 yea. I was going to put the roush supercharger on my PP2 but didn't want to lose the brace.

[@calvinmauney5669]

@@GR018 I'd say get you a paxton or vortech v3 they run strong

[@SaVarMatner]

@@GR018 Or an ESS G2 or G3 Supercharger kit from ESS Tuning. I have one on mines. 125mm Pulley running 6 to 6.5 pounds of boost. The G2 kit is good for 600-800HP depending on Pulley Size. Cost me 5,600 bucks amd 6 weeks for them to build the kit and ship it to me from Chandler, AZ to Atlanta, GA and I installed it myself. Took me about 1 day. Basic hand tools. They have a sell going on now. I believe the G2 kits are running around 4,500 because they are out of stock so basically pre-order. My car is on my channel. I have more goodies going on soon.

[@Boosteds550]

How many pounds was this on?

[@Pistol755]

How much boost did it climb to with the 3.7 pulley?

[@sdrtech]

15-16

[@Rob...]

what fuel system is in this car? so many choices now

[@bigbooger7739]

Fore innovations triple pump.

[@ryanfreeman5987]

Great video. Great info. Did the car have any exhaust mods?

[@bigbooger7739]

Corsa Cat back only, stock headers and stock cats.

[@shawndyck4135]

So so awesome love the builds guys I have a question tho I was wondering if it's a stock engine and if so will that kind of power take away longevity of that engine?? I'm just learning about all this stuff so I was wondering

[@skullhart]

Having recently gone through this process the answer depends on what generation Coyote engine you are referring to. Generally on gen 2 coyote; 850rwhp is safe. Gen 3 perhaps 950rwhp. The weakest parts are the oil pump gears and crank sprocket followed by the factory rods. If you address both of these and are tuned properly you can run close to 1100-1200 before you should sleeve the block.

[@shawndyck4135]

@@skullhart thank you for the information that's crazy numbers I love what can be done with newer engines and those beautiful bolt ons that's tonnes of power and looks fantastic

[@tomcarney1193]

@@shawndyck4135 he answered the question without answering the question. how long is the 64 million dollar question!

[@majinbluu_956]

@@tomcarney1193 I don’t have a supercharger system, yet. But I would assume there’s no definitive answer. Longevity of the stock engine will be determined by many things (how you drive, supporting mods, etc).

[@stangboy3029]

How are you running a 3.7 pulley on 93 ? What is that like 15lb+ of boost? That motor is gonna grenade. 4.75 pulley is 9-10 PSi. Get two tunes and two pulleys.

[@bigbooger7739]

I only run the car on One S and R. And I do have 2 tunes and 2 pulleys.

[@stangboy3029]

@@bigbooger7739 p1x? What pulley for 93? What boost?

[@bigbooger7739]

Yes P1x-4.7 -don’t remember

[@محمدالشمري-ض4ث7م]

Nice

[@nicholasjordan4484]

👊🏿👊🏿👊🏿👊🏿🔥🔥🔥🔥

[@davidcd94]

Damn ken we made that much power with my 2015 pro charged S550 3 years ago 😂

[@JkeeneMX607]

A chevy fanboy disliked this

[@tomcarney1193]

owner will be dropping a crate motor in soon after that stock 5.0 implodes

[@MyCricketGirl]

Apparently you drop comments without knowledge 🙄.

[@tomcarney1193]

@@MyCricketGirl tell your momma thanx!!

[@MyCricketGirl]

@@tomcarney1193 😂 sorry I hurt your butt.

[@tomcarney1193]

@@MyCricketGirl no worries!! so tongue is so soft!! your momma taught you well!!

[@MyCricketGirl]

@@tomcarney1193 grow up troll.

[@Teddyatlastwobrsincells]

Any transmission upgrades or clutch upgrade on this car or tbd? I have a 18+ mt82 and scared to destroy the transmission with boost

[@bigbooger7739]

McLeod RXT and lines that’s it.

[@Teddyatlastwobrsincells]

@@bigbooger7739 this is your car? And if so how is it holding up?

[@bigbooger7739]

@@Teddyatlastwobrsincells yes it’s mine. And everything is good so far, no issues at all.

[@shaunharrison9618]

@BigBooger I assume you have 3.73 gears? I have a 16 GT PP and trying to decide if I go with Procharger, vmp, or whipple. Just concerned I will be shifting every second. How is the driving experience?

[@kingdavid6141]

@@shaunharrison9618 I have a 15 with vort S/C with 331 gears and it runs great 373s mite be to much.

[@buckmaster5250]

You are taking advantage of people who know no better.

[@abdullaadel6430]

Procharger just don't sound that good

[@nola504boy1]

You’re crazy lol

[@KingB015]

Crack it is I’m assuming ?

[@kingdavid6141]

They don't sound as good as the vortech S/C for sure.

[@midnight347]

I'm a tvs guy and even I know centris sound nasty. What are you on?