STOP BLINDING Oncoming Traffic!! (How to Aim Jeep JL/JT Headlights)

[@1958werewolf]

My lawyers “ Dewie- Cheetum & Howell” will be in contact with you. I backed up 25 feet in my garage and went 8’ through the back wall!! 😂 I’m like you brother! Hate the high out of adjustment people especially. “ Look at me I have a 12” light bar and run it night and day blinding even during the daylight. Thanks again.

[@willrouse2351]

Great tips thanks. Just did this. 5 minutes tops.

[@northridgenation]

Glad it helped!

[@Aldoperez1]

This awesome guys thank you super Fan of northridge4x4

[@renojpuente]

Thank you for that info. We were being flashed from new Mexico through Texas on our road trip back from Colorado. We drive a Mojave and I am guessing the factory did not adjust the lights. Thanks again

[@Pops-TexasJeeper]

Great video! Thanks for the info!

[@kevinvoyer5053]

The way I’ve always done headlight adjustments, I would get 25’ from a wall, then use a tape measure to find how high the center of your headlights are, then deduct 1” from that if you’re not planning to haul anything heavy and adjust down to that hight. But if loading heavy add another inch lower. I found that using the same hight with every different vehicle was wrong. A Corvette headlight is a lot lower than on a Jeep’s, so that 36” might be too high to aim for.

[@darrenroos6408]

thank you!

[@WhatTheIfYouSeeKay]

I have often wondered, how does someone aim the off-road lights? I have LP6’s and ditch lights. How does someone aim those? Is there a standard to aim front facing off road lighting? Maybe you can do a video on that?

[@Alberta-extreme-recon-JLU]

I have orical led and they don’t have adjustability is there any way to adjust them ?

[@JoshHarrisPhotography]

Can I borrow a garage with about 35 feet of depth? Kthx. :) Great video. I have JK ... is the process the same?

[@northridgenation]

Check out our JK video here: kzbin.info/www/bejne/raOokJ-jg5KqfK8

[@JoshHarrisPhotography]

@@northridgenation Awesome. Thanks.

[@jeradmiller4575]

What front bumper is that?

[@northridgenation]

It's an Artec Industries "Bantam Series High Clearance" front bumper. (SKU : JJ9021)

[@andrewwayne8190]

Mine won't twist any further and still shoots up in the sky

[@northridgenation]

You've got something going on with yours. If you have the OE lights, check with your dealer. If you have aftermarket lights, check with where you got them, they should be able to help out.

[@haloeteam1]

Jeep girls too she says😅