Street Legal KX100 Dirt Bike: Brake Light Switches, Blinkers & Broken Promises

[@pmd7914]

To drill "half a hole", clamp another piece on top of the piece with the existing hole, centre punch & drill through. The hole in the top piece acts to guide the drill bit through the half hole.

[@grahamcox8385]

These videos are all light hearted and fun to watch, the attitudes of the people who film them are so polite and friendly, really informative stuff for the home mcguyver mechanics out there, totally awesome channel and totally awesome people,🇦🇺👍🤗🏍️peace and joy to you always

[@theboogeyman9813]

Wholesome people. That said, crimpin' ain't easy.

[@hellshade2]

and knowing electrical on a bike or car is a good skill to have!

[@K3NnY_G]

The only channel after all these years with YT being my main source of entertainment that I'll always remember to like the video before it even starts. I want to, I want you guys to know what you do is great and succeed at it. So many other creators are just there; you guys are just.. Real.

[@1eltino]

Same here!

[@idan1358]

+ 1👍

[@2clappedout477]

The man the mith the legend! Has returned, love the videos man keep it up!

[@noyopacific]

Thanks for the video Jake & Jennie! Looking forward to seeing you again real soon . . . or when ever the spirit moves you! ❤

[@on_another_level5661]

A Friday with a Jennie's Garage video release? Doesn't get much better. Love ya guys.

[@leebryant5443]

Jennie’s garage video pops up I leave the video I was watching went straight to yours . I miss you videos on a regular basis but I also understand you guys have a life and family and family comes first!

[@jenniesgarage]

Thank you! Hope you enjoy the video

[@arsbadmojo]

I don't care a bit if you accomplish anything; it's never the destination - only the journey! POST MOAR!

[@FatherForeskin]

I missed y'all....😕Y'all are the best.😌 Keep up the awesome work. Hopefully you both don't abandon us again......😬 11 out of 10 yet again for the vid and an extra 1 for the holes Jake 😂

[@MCW1955]

Oh man , a new video!! After I wiped away the tears of joy, I ran out to the front yard and screamed “ A new Jennies Garage!!! “ The lady walking her dog was not amused.

[@jlucasound]

Your neighbor was just upset because KZbin failed to send her a notification.

[@brenthirschman9142]

Always excited to see you guys again, hope your doing well in all your endeavors god bless and look forward to seeing camera girls bike finished

[@jeffh4505]

I’ve missed your banter and ingenuity

[@SateenDuraLuxe]

I love all your shirts with the holes in them! It's really endearing.

[@wurthmannd024]

Great joy comes to me when I see uploads from you. Keep it up man! Great content.

[@prdoohan]

Great to see you again team 😁. Also, I love how the garage changes periodically and its just a normal part of the channel. We all know you guys are busy living life and doing your thing. It's always a nice surprise to see a new video waiting and hearing your updates 😁

[@jlucasound]

And no more PEACH colored garage! 😄👏

[@chinanorthairguns]

I use the dremel with a sanding drum to grind the hard skin off my feet. Missed out on a KDX 175 this week. Will keep looking.

[@johnpossum556]

Dremel Dan would approve.

[@braydenstringer6444]

Been busting my butt all day working on my car and I come in to this.... what a nice thing to relax to.

[@austinreeves5221]

miss these videos! I remember watching the generator video and watched everything for years

[@silveradoguy87]

Heck yeah dude! Always gotta watch a new JG video when it comes out! Don't ever stop you two! Love your humor and determination!

[@yamahafan7330]

Hey guys, so glad to hear from you both. I'm sure that I'm not the only one that's missed you both. Please keep the videos coming, they're most enjoyable.

[@gregm8941]

It is really a shame that the best couple on KZbin only put out one or two videos a year.

[@BBoyXy]

Great job on the narration audio quality, guys. Thanks for the entertainment

[@chrisengle2195]

Two of my favorite people on KZbin, and probably some pretty great humans overall.

[@morganweast4228]

Thanks for pointing that out, I yelled at my daughter's boyfriend yesterday about safety glasses.

[@remyllebeau77]

Tell him to engage Safety Squints!

[@justinharris1299]

Always enjoy the videos. Its a bummer that the videos are far apart but I still love watching them and will continue to do so.

[@johnpossum556]

@Jennie: For like $3 you can get a set of center drills. Buy him a set as a Xmas stocking stuffer. I promise you his mechanical world will change because he can use a small one to get a hole going then the regular bit will work to open it up properly w/o walking. Miss you guys, great to see you both lighting up our friday nights!

[@jview70]

good to see you back. dont put too much pressure on yourself. just do what you want to do

[@twocvbloke]

It's always fun putting connectors together, and then finding they're upside down, gotta love undoing them to swap the terminals around... :P

[@lodougherty]

Glad you guys are still alive and doing well! I lost track with the random uploads.

[@jamespinto1405]

Would love a backstory on the moves!

[@gtametro]

You know its serious work time when the best T-shirt comes out 😁 My wife throws all my good work shirts out just as they start getting comfy. Great to see more progress on the KX100, road ready in time for Christmas? Love you guys

[@devon1635]

God it's so good to see you back, I missed seeing your videos.

[@alexj6408]

Love your videos. Your energy and dynamic with your camera woman is fantastic. Keep up the awesome content!

[@AllenKll]

Glad to see you're still alive, and putting out videos! Another Great One!

[@brettonmcinerney6954]

Glad to see you guys again. Thoroughly enjoy the light hearted fun video " in socks" 🤪

[@alanlake5220]

Missed you guys, glad your back, keep em coming . If you film it we will watch it .

[@VroomVroomDana]

Always good to see an upload from you guys!

[@jenniesgarage]

Thank you, and great to see you back on a bike! I really like those Husky 2 strokes!

[@tjtobin86]

Haven’t even started watching and I hit like. This channel is amazing!!

[@kevinc8744]

I did the same thing!

[@srmiii90]

My favorite handy comedy duo. Really happy to see the new video, keep up the good work.

[@AlicanteTrailCam]

It's nice to have have you back.

[@oddysee3030]

Always happy to see a video from you guys, try not to stress out about the upload rate too much :)

[@schwuzi]

Wow. Your electrical work looks OEM. That plug kit is nice and you're really good with the crimper. I found your channel back with the generator rebuilds and have watched all your videos since. Even checked out some of the old camper videos. I hope you know that so many people like me look forward to your videos. I know the editing takes a lot of time and dedication. Finding time to do these projects, film and edit these videos when life goes on around you can't be easy. I know I get way too little done on my projects and I don't document that stuff for anyone. Don't be too hard on yourself for your upload schedule. Even though I'm sure I speak for everyone that I'd like more videos, the scarcity of them makes it that more special.

[@jeremygourde9880]

Glad you guys are doing well, I waited till Sunday morning when I knew I had a couple Hours of quiet time to watch your video. I look Forward to the next video however long that may be. Keep up the great work and don’t loose sight on finishing the bike.

[@jamesbarisitz4794]

Sounds like you've had a lot on your plate lately. Upload when you have time. No pressure, we aren't doing anything or going anywhere. ✌ 😃

[@TrudgeRC]

A new video from Jennies Garage - spring in step engaged.

[@superhawk20002]

I felt the pain and fancy feelings of having a kill switch that worked when you meant it to. But it didn't leave me with a fancy feeling for long -> because it was such a rare occasion and all, I never remembered that I used the kill switch when I tried restarting the bike. Everyone felt the pain as we took turns kicking, then trying to push start, pull filters and carb, then go over fuel and tank... all to end with someone strolling by and pointing out the kill switch.

[@SEKCobra]

Man, you guys really are beacons of joy, always lovely to hang out with you.

[@user-zh7zj8cw2i]

Thanks for being so authentic and entertaining at the same time.... the chemistry is awesome. We all hope you are well... you keep that part pretty close to yourselves... We also hope you feel that you are never alone.

[@jenniesgarage]

Thank you! Glad you enjoy the videos.

[@andrewsiers4689]

Always a good day when you post a video! Thank you!

[@failblazer2004]

great to see another video from you, many thanks from the UK👍

[@jasongaudet8719]

I've been wondering when you were going to get this project back on track. Keep em coming! Don't make us wait so much Lol jk love this channel!

[@Madmick82]

Always brigthens my day when i see you guys. Hope you have both been well.

[@Spacr700]

What a treat on a Friday! Thanks guys, you made my night

[@SovaKlr]

As always, glad you guys are back at it.

[@jeremiahlogan6202]

Yes!!

[@JaxsonM22]

Good to see y’all back!

[@waltermorgenroth7872]

so happy to see more jake and jen content :)

[@DOSn3rd]

And at last I see the light, and it's like the hole has shifted 🎶 Excellent video as always :)

[@Kaster89]

Whooo glad to see you guys back on the KZbin!!!👍🏻

[@fxm5715]

It's totally worth having a few standard size, two flute end mills for this kind of hole moving in a drill press (if you don't also happen to have a milling machine). They can plunge cut quite well next to existing holes without wandering. You can get a cheap set of six for around $20. Or you can get a really nice set of the same mills for $150+. A decent set that will last a while can be had for $40-50. Might seem like a lot, but they work great for this kind of hole moving, and are also designed to take side loads if you want to do it that way, (although the drill chuck still isn't mean to take side loads.)

[@motohead771]

Love the jokes and banter as always. Happy to see a video by you guys whenever one comes out. No pressure on the upload frequency. Most of us know life happens. Hope all is good with the move!

[@EDP1]

hey we didn see the blinkers working . you would be a great teacher . thanks for sharing .

[@liquidhalf]

Missed you guys, never miss an upload

[@hadrianhaine5204]

As soon at I get a notification that you guys have dropped a video the world stops till I have watched at least once. Thanks so much for the videos you have made Please keep making content.

[@christinegreen7120]

Great to see you two back. Missed your skills, presentation and banter big time. Keep it up and thanks for the upload, Simon

[@ooohry]

the algorithm rudely kept this video from me, im so happy i get to catch up now. those plugs are pretty fine but they arent weather proofed! you can get bulk cheap automotive plugs with weather seals that are crimped the exact same way with a rolling crimper, if you are feeling fancy and have an excess of money one day.

[@thomasdunn22]

Finally new content. I keep checking back, I missed you two. More please!

[@bhoss7133]

So excited to see you have posted a video again!! I've been patiently waiting. I know it's going to be entertaining so as the ads run before the video begins, I've already gave it a thumbs up and typed this comment! Thanks for posting!!

[@scubasteve4093]

happy to see a new video from yall. hope all is well

[@mrf339]

I hope you guys achieve everything you want too through these videos. I personally believe that you could be top five on KZbin if you posted more often. But since I'm not greedy, it's better than a Christmas present every 3 months.

[@Lynn-ww7lh]

Love the videos they always put a smile on my face

[@hotnanas]

Glad to see another video posted! You two are awesome

[@scott01clay74]

You guys are too funny please post more videos Your videos are always great Camera girl jokes are very funny Plus camera GIRL sounds like she would be a very good singer

[@jimbob90p]

I can relate to that I rode 2 strokes all my life and it was just like that

[@nicolauscory2065]

Had to rewatch the generac vids to fill the void. Love this KX project.

[@operationlegend9746]

Oh my goodness he's back!

[@mattycreek384]

You guys are so entertaining, long time fan here. 🔥

[@TechGorilla1987]

@6:58 - A little WD on that bit will help keep the aluminum from fouling the carbide burr.

[@P6_7R_Nick]

Excellent video once again. I'm pressed with the tidyness this project is developing. Its going to look factory, apart from the multicoloured wiring. Not a bad thing, it's just not black. Great work again you two.

[@thebacon666]

Another unorthodox option to use in the future with the drill press , is to use an end mill and move the hole down that way and it wont flex.

[@jlucasound]

It can work. If you clamped it really tight to the table and you go slow, it is, yes, an unorthodox simulation of a milling operation. Plunge milling.

[@dumpstergoonz4045]

I have missed your videos, glad to see a new one! Keep them coming

[@acidwaffle]

Always great to see a video from you two, especially on the KX. It looks great so far. Hope you are well, much love.

[@SpeeedyZach]

I love your videos! Entertaining and informative. As a wrencher myself these are the videos I look forward to. Keep em comin 😁🤙

[@jlucasound]

Mr. Offagin. He is my 3rd period teacher on and off again. Watch out for Mr. Hornagin. Incidents have been alleged. 🤣 I missed you guys! ❤

[@jacobcounty]

Great to see a new video! Let’s get this bike done!

[@thomascarruthers3980]

Missed you!!

[@magstrikefjerstad3192]

I missed you so much!

[@roccobarras8192]

Always a blessing when they post

[@howssmith785]

Love when I see a video from you two I wish you guys all the luck in the world you guys are a great team ..

[@tychozeeman8315]

you guys are back nice to see

[@miquerto]

Nice. Love watching y'all. Thanks for sharing.

[@SBDavin]

Your videos are always informative and fun. Perhaps you need a grommet around that wire hole in the rear fender? I suspect the hole may wear away at the wires' when the fender flexes. Thank you.

[@musicbox4022]

Still the best channel on KZbin

[@equalizer4633]

After all this, you could make some street legal wiring kits and sell them :) Always good to see you again

[@corbyweeto6061]

I had a 1999 kx100, went hard for a small bike. Great bike

[@michaeldelarm1630]

Not many channels can grow up almost 500k subs by posting every few months... Jake and camera girl do good content.

[@karnesmotorsports]

Pretty much the best crimper on KZbin!

[@williammidgette3370]

thanks for upload you guys could restore a pair of rollerblades for ten years and i would watch it all

[@56Spookdog]

When I was a kid you had to hold down the kill switch, it was lots of fun when it malfunctioned and zapped you.

[@Kaster89]

5th element reference!!!👍🏻