How to use a torx bit to remove a screw with a stripped head. #tips #tools #diy #youtubeshorts
Пікірлер: 190
@user-bf6fu1bb9f Жыл бұрын
This actually worked when a stripped screw removal tool didn’t even work, thank you!!!!
@tipcentric Жыл бұрын
You’re welcome! I have tried them removal tools a few times. They do work, but not as well as this method can 👍👍
@kyleharrison4878 Жыл бұрын
What size drill bit do you use for that t15?
@tipcentric Жыл бұрын
@@kyleharrison4878 yeah that’s right.
@TotalWarriorLegends5 ай бұрын
Is it the jn reverse strip it? @@tipcentric
@tipcentric5 ай бұрын
@@TotalWarriorLegendsno, just a Torx bit 👍
@BlackoutCreatively Жыл бұрын
Don't think my Aldi bits could withstand that hammering 😅
@tipcentric Жыл бұрын
Can aldi bits even survive a drill?? 😂😂
@BlackoutCreatively Жыл бұрын
@@tipcentric I never strip my screws - my screws strip my bits
@tipcentric Жыл бұрын
@@BlackoutCreatively 😂😂😂👍
@solowarrior35495 ай бұрын
@@BlackoutCreativelylmao same
@ABW7774 ай бұрын
Parkside 😂
@nhatnoon93394 ай бұрын
LEGEND. I spent 2 hours trying all different methods. This one worked like a charm
@tipcentric4 ай бұрын
Love comments like this! Glad it helped out! :)
@ferndogg442713 күн бұрын
I had one striped last week on a ceiling fan light, i was lucky enough to remove it w 4. Inch vise grip
@mikedonlon159419 күн бұрын
Im at home depot in the parking lot looking for a good stripped removal tool before i go in, and im gonna go home and try this before i buy anything😂
@X40RAX4 ай бұрын
OMG! I used masking tape as additional grip and it worked like a charm. Thank you!!
@RickyEats2 ай бұрын
it just ripped off
@lavonicaapachito72765 ай бұрын
This is the best method. Even for hard to reach places
@hakemz.5 күн бұрын
Thanks! This definitely fix a stripped screw on my laptop. 😊
@DurgaRai-rm5vm10 ай бұрын
Tried it and it worked for me. Thanks for sharing it!
@eliasrzdvАй бұрын
Omg I’ve been googling and buying things and returning things to do this. You made it so easy and quit to the chase. Thank you fr this!!!
@tipcentricАй бұрын
no problem at all!! I hope it helps you out! :)
@mmonty343821 күн бұрын
Worked great today!!! Saved us, Thanks
@tipcentric21 күн бұрын
@@mmonty3438 no problem at all! Glad it helped!
@caseymoto5 ай бұрын
Speed out tool didn’t work. Was getting ready to cut the screw.. tried this and it worked.. wow!
@strangedotmachine92817 күн бұрын
Thank you!!! This worked and the screw removal tool didn’t.
@athermedia917 ай бұрын
3mm drill bit and a t15 worked well for me. Thanks
@tipcentric7 ай бұрын
Very welcome 🥳👍
@solinworld632Ай бұрын
What size t15 please 🙏🏼
@Wes2k817 күн бұрын
@@solinworld632t15 is the size lol
@lisanoturtle3 ай бұрын
Thank you this worked!!
@terryrobinson30165 ай бұрын
Cheers that actually worked on my cylinder lock screw.
@tipcentric5 ай бұрын
Most welcome, glad it helped :)
@emeraldofaris4 ай бұрын
Worked for me! New skill unlocked. Thanks man.
@jayteeroyalz4888 ай бұрын
Tried it and it definitely worked. Saved me so much time. Thank you!🙏🏽
@vijibalankumaran129213 күн бұрын
It is really working. Thanks
@AverageWhip2 ай бұрын
THANK YOU SO MUCH👍
@stanclapper71793 ай бұрын
My experience, worked just fine after I bought set of GOOD hex bits.
@supremeshadow5010 ай бұрын
As a person who tried to install ssd card on my ps5 and got screw stripped i call tell if i do that my ps5 will die.
@DelRae4 ай бұрын
We must make sacrifices to make his screws life living gell
@damo00786 ай бұрын
Excellent DIY hack ....it worked . Thanks !
@tipcentric6 ай бұрын
You're welcome!
@user-jg6jy2cc2j5 ай бұрын
Thanks! Did this and it worked!
@nemysantos7 ай бұрын
It worked!!!! Thank you sir!
@tipcentric7 ай бұрын
Most welcome! :)
@chater608 ай бұрын
I've actually saved myself a lot of frustration at work with a sharp 3/16 and 3/32 bit and a throwaway star bit
@thetexasgreek6 ай бұрын
You're my hero!
@fierceperedur3 ай бұрын
Brilliant, thanks.
@jasonrotella98904 ай бұрын
This worked amazingly thank you!!!
@tipcentric4 ай бұрын
You're welcome!
@tolsen82123 ай бұрын
Now do one for a stripped drill bit haha
@tipcentric3 ай бұрын
😂
@Sly_Fella Жыл бұрын
My dad used this trick to get a stripped screw out from my e scooter, worked perfectly
@tipcentric Жыл бұрын
Awesome! 👍👍
@dB-uv7wp10 ай бұрын
Just the proper tool
@jamesallen89179 ай бұрын
Like what?
@darrellhawkins881710 ай бұрын
Worked for me and 6 stripped out Phillips ! Thanks
@tipcentric10 ай бұрын
Very welcome :)
@raskeltv88824 ай бұрын
tnxxx it worked for me!!!
@therandomman66478 ай бұрын
I have a lawn mower shaft with a stripped grub screw. I'll try this when I get the chance! Gotta get the broken ez-out out first
@Nustart99912 күн бұрын
Stripped screw turn a 2 hour job into a all day activity
@5thRiverRat2 ай бұрын
Impressive.
@bryantpatricio8652 Жыл бұрын
This just saved me 😮💨
@tipcentric Жыл бұрын
Happy to help! 👍😀
@lourdestienda9396Ай бұрын
With the tools that I had a available this was my only option. I broke the drill bit but I manage to drill into the screw enough to use the star bit. It worked!!! Thanks, @tipcentric!!
@tipcentricАй бұрын
most welcome! :)
@scery-paranormals79792 ай бұрын
yeah its moustly easy from wood shoow us howe to remowe from locking mehanisam
@arvc29113 ай бұрын
Nice, good idea
@sandro550611 ай бұрын
Worked, you saved my scooter
@handythor3 ай бұрын
What size drill bit for the T-15. Also is he going forward or backwards.
@nullnull403forbidden2 ай бұрын
That's what I want to know too of the size drill bit.
@element550Ай бұрын
Thank you!! I used this to get a screw stuck in my rc truck chassis. I was starting to get really frustrated lmao
@tipcentricАй бұрын
Awesome! I’m glad it helped!! 👍👍
@element550Ай бұрын
@@tipcentric it took me a few tries since I’m not really sure what I’m doing it’s now a learning experience, but at least now I have this method to use again thanks to you!!
@RickyEats2 ай бұрын
what size drill bit ?
@JohnOcampo-pg4tr9 күн бұрын
Whichever fits I believe its called a torx
@SMIELYYIOS11 ай бұрын
Thank you perro
@onetruesoldiervt36862 ай бұрын
That’s smart !!!
@Biblicalgiants11 ай бұрын
Im thinking about using this method on an expensive set of balisongs with T-10 screws.
@AfarikanMan3 ай бұрын
You dont need to use the drill bit just use a different size screw bit
@jinyige42059 ай бұрын
HI, What size drill bit do you use for that t15?
@ProjectArms4719 Жыл бұрын
It worked!!!
@tipcentric Жыл бұрын
Did you try it? Awesome! 😀👍👍
@Pew-pew-is-fun5 ай бұрын
Been doing this for years
@finalmakerr1Ай бұрын
Cool 😎
@WarrensRandomAndWeirdVideos10 ай бұрын
If this works ur saving me money my friend
@bobwallace98149 ай бұрын
Before doing that, put a small piece of duct tape on the screw and use a manual screwdriver. It turns it right out.
@ELScorcho01108 ай бұрын
That does not always work.
@Khon_kha7 ай бұрын
@@ELScorcho0110yup I already tried that didn’t work screw was too rounded and is still stuck 😂
@jettschenker28 күн бұрын
The video is kind of pointless when you don't tell him what size bit to use with the t15
@tipcentric28 күн бұрын
common sense will prevail
@bmorestance19 күн бұрын
Hey how do I do it for a flat head screw that is stripped?
@tont0576Ай бұрын
Иногда работает, а иногда бита обламывается. Поэтому надо брать не очень нужную биту.
@justinl59149 ай бұрын
I am not doing this to my Steam Deck lol
@thooney29347 ай бұрын
Wish I seen this about half an hour ago. Just been fucked on a screw for past 20 minutes
@shak_9972 ай бұрын
Is that a torx bit?
@tipcentric2 ай бұрын
Yeah t15 I think
@pauldcoombs7392 Жыл бұрын
Or put a rubber band in it then reverse your drill whilst the end is in the band does the same thing
@tipcentric Жыл бұрын
Did that one in another video. It’s a bit hit and miss, depends how much grab it can get in the screw head and how tight the screw is. 👍👍
@cherigriffith724 Жыл бұрын
Yeah no not always😢
@edgardrodriguez13955 ай бұрын
What size drill bit for torx 15?
@tacotac102 ай бұрын
What size drill bit
@ellerykingston10772 ай бұрын
Bro just changed that screw's gender
@jamesallen89179 ай бұрын
What sizes to use though, surely every situation different
@yolandagomez9255Ай бұрын
What are these bits called? I tried everything. I even tried to extraction tools and it does not work.
@woodennecktie8 ай бұрын
why no manufacturer comes with T16 T 21 T26 etc , now the tolerance is useless because the screws use maximum tolerance too
@TimeGallon3 ай бұрын
What size drill bit?
@swebbi383Ай бұрын
what if its sideways
@JenniferSchadeLMTGulfBreeze9 ай бұрын
Unfortunately, this didn’t work for me. Still can’t get the screw out.
@HazeePagadizzleАй бұрын
What do you call this screw?
@ngchongsin20092 ай бұрын
My screw head had chipped off, how do i remove the screw?
@YaboiGamerYTАй бұрын
he used a different bit on the screw🤦🏾♂️
@tipcentricАй бұрын
yes, that was the whole point of the tip 🤷♂️
@crisg67913 ай бұрын
What is the size of the drill bet
@hunterc292310 ай бұрын
In the start you used the wrong bit
@user-zw2vz5ib9c7 ай бұрын
Для такой операции нужна бита очень хорошего качества. Как резец по металлу.
@luisandraschnik30013 ай бұрын
Podrías usar un extractor de tornillos
@hopebgood Жыл бұрын
My elderly mum just had some bloke replace some door handles today. On closer inspection a lot of the screws he put in have the screw head absolutely stripped/destroyed. It looks like he actually drilled out the screw heads! That's not good is it? Seems like a right bodge job to me. Any replies would be appreciated cos I hate seeing my mum ripped off.
@tipcentric Жыл бұрын
There’s a ton of ways to remove stripped screws. Sometimes you can get them out with a rubber band, other times you need a bit more brute force like in this video. You can also buy reverse thread spiral bits to get them out, but the good ones cost a fair bit. I’d try the rubber band method first, failing that, I’d try this method. Then replace with new screws, and either drive them by hand, or make sure your clutch on your drill is set to a low setting to prevent stripping 👍
@dennyx34563 ай бұрын
How about at glass door?
@maisuangkhambosuangkhambo72Ай бұрын
Please help me without tools technique
@black-mesa3 ай бұрын
Insert Screw on the Loose
@spoah14662 ай бұрын
How tf do I do this on my laptop
@SpartanJoe1935 ай бұрын
Electronics: rip
@user-yw7yy5mt3g8 ай бұрын
Даже ногти пострич некогда, весь в делах бедненький
@alexcosios21733 ай бұрын
What’s the drill b it size?
@randomcro242 ай бұрын
can't wait to do this on my $2000 laptop
@tipcentric2 ай бұрын
Good luck 😬
@teddybobeddy73746 ай бұрын
🐐!!!!!!
@catzdollz9810Ай бұрын
Would somebody please explain this process, step by step for me? Yes, I'm a girl that needs to take out 4 small rusted in screws so I can fix (re-glue) a torn speaker cone.
@juliansanchez8676 Жыл бұрын
What size drill bit is that drilling In screw
@tipcentric Жыл бұрын
2.5mm I think.
@duggydugg3937 Жыл бұрын
👍👍👍
@tipcentric Жыл бұрын
👍👍👍
@Steamrick2 ай бұрын
That poor bit. You can see that it's been damaged from (presumably) previous attempts. Still - if you're desperate, I suppose...
@confusedjack605710 ай бұрын
Yeah you didn’t reverse that footage at all. 😂😂😂😂🎉😢🎉🎉🎉🎉🎉
@Aat-zz2de Жыл бұрын
Are you reverse drilling or in forward mode?
@SAMMIEJONESJUNIOR5 ай бұрын
forward drill, reverse screw
@rolanquispe16653 ай бұрын
Muy buena
@4D1Characterror6 ай бұрын
Don't think I can do this on my controller.
@jloving8 ай бұрын
Highly recommend
@Forellekrippe9511 күн бұрын
Notebook schrauben eher nicht leider glaube ich
@Hustle876 Жыл бұрын
But what is the name of the removal tool
@tipcentric Жыл бұрын
It’s a torx bit. T25 I think
@resandor Жыл бұрын
What kind of goofy ish is this?? The thumbnail clearly shows T15. You don't know what's on your own video bro?
@tipcentric Жыл бұрын
@@resandor you’re correct it was a 15. My bad.
@MuncheeZRetro Жыл бұрын
@@resandorcalm down mate, he only made a mistake lol being goofy is calling him up on it
@resandor Жыл бұрын
@@MuncheeZRetro I helped to make him better for future videos. Get over it
@dominiqueoliviero438028 күн бұрын
Bien joué comme vidéo mais sans le diametre du foret et la taille de l'embout étoilé, je ne vois pas l'intérêt de cette vidéo pour les néophytes 😂