How to fix loose joints | Tutorial Tuesday

  Рет қаралды 86,381

Studio G

Studio G

Күн бұрын

Пікірлер: 155
@glenblessing1536
@glenblessing1536 4 жыл бұрын
So helpful!!! I'm somewhat of a beginner builder ( getting back into building Gundam) and I've been plagued with loose joints.
@JuanGarcia-zi5ql
@JuanGarcia-zi5ql 4 жыл бұрын
Heck yea, this what I needed. *looks at Nu Gundam* Tip #3 Glue a Bamboo stick on the wing for stability
@Kyodie-bz1sf
@Kyodie-bz1sf 4 жыл бұрын
Or a better idea. Just get the real grade
@zaduckhulu2529
@zaduckhulu2529 3 жыл бұрын
Toothpicks work too
@kreutz-e6h
@kreutz-e6h 2 жыл бұрын
To people who don’t have access to glue/to worried to try this, another thing i found that works is taking a small piece of paper and putting it where the joint attaches, tightening it a bit,
@bryceyoungwolfe5016
@bryceyoungwolfe5016 3 жыл бұрын
Staring building a RG Impulse Gundam and had a loose peg in the fore arm swivel. When I was looking up how to fix it and saw your video I knew which video to watch. I absolutely love your content.
@rejectedmind-1173
@rejectedmind-1173 4 жыл бұрын
I used this same method on pretty much every joint on my MG Exia. Neck, arms, waist, legs, and ankles because I really wanted the kit, but heard the massive issues with the ankles and such. I used clear nail polish though and so far, very solid. Every ball joint and peg is somewhat thicker and I'm very pleased. Apart from the smell.
@josephdonnluna4483
@josephdonnluna4483 3 жыл бұрын
Thanks for the idea... my Astaroth Rinascimento went well after tightening up some joints on the arms... The Demo Knife/Bastard Chopper combo can hold on its own easily..
@mai_mai10
@mai_mai10 4 жыл бұрын
Great tip! I use clear nail polish to tighten the loose joints on my kits. Worked on my RG 00 Raiser and RG Strike Freedom.
@raihanaji7516
@raihanaji7516 Жыл бұрын
Thats great. Can you tell me on how to do it please? I would gladly appreciate it
@Skydmciscool
@Skydmciscool 6 ай бұрын
@@raihanaji7516 I got some cheap polish and it just wears down when I move joints so I got some super glue
@Greyhoundsniper
@Greyhoundsniper 4 жыл бұрын
Btw for those concerned about the white marks most super glued give, use loctite or in general gel super glue, no whitening and isnt a hastle to clean off your hands
@TheToastermech
@TheToastermech 4 жыл бұрын
Hello, I really like your modeling and customization. I wish I had remembered this last video but you were asking about weathering and I saw a video by PLASMO - plastic models with a GM sniper II and it covers weathering that I believe you might want to see. Please keep up the amazing work!
@SolaireFlair
@SolaireFlair 4 жыл бұрын
I don't know why but I'm always very paranoid about permanent modifications to kits, so what I've always done, and it's probably a weird solution, I wrap a little bit of tissue paper or toilet paper around the ball joint or peg. If you do a small enough piece, it can totally hide inside the joint, and it's a completely reversible modification if you ever need to for some reason.
@ben-benrada463
@ben-benrada463 4 жыл бұрын
This is perfect for my sinanju...this is what i waiting for! Thankyou!
@Matthew-ny4mf
@Matthew-ny4mf 4 жыл бұрын
I bet its a RG sinanju
@ben-benrada463
@ben-benrada463 4 жыл бұрын
@@Matthew-ny4mf yeah its rg sinanju
@reneken574
@reneken574 4 жыл бұрын
Wait, but the loose part most of them aren't joints. You really sure to glue them all?
@ben-benrada463
@ben-benrada463 4 жыл бұрын
@@reneken574 no, just only the head part and the wrist part of it. Cause its keep moving while im bending the arms of it
@Matthew-ny4mf
@Matthew-ny4mf 4 жыл бұрын
@@ben-benrada463 how bout the waist? Mine cannot hold the backpack so its look like people with backache
@xmruaex7672
@xmruaex7672 4 жыл бұрын
Studio G: this video is sponsored by newtype, they are one of the largest hobby stores where you can get your kits, tools, and “everything” you need. Me: can i get one cheese burger without cheese
@dhimasdhafa7220
@dhimasdhafa7220 4 жыл бұрын
I usually used clear nail poolish to fix loose joint, and it 100% works. Just try it , be yourself n never surrender!
@M.r..R.i.c.e.
@M.r..R.i.c.e. 4 жыл бұрын
Have they ever gotten loose again
@Vezon1121
@Vezon1121 4 жыл бұрын
The arm for my HG Barbatos keeps falling off because of a loose poly cap. This was very informative thank you!
@matttumberman2191
@matttumberman2191 2 жыл бұрын
I've had my doubts, but it actually worked. Thank you bru
@KelgaCreations
@KelgaCreations 4 жыл бұрын
Short and sweet!
@monochrome2363
@monochrome2363 4 жыл бұрын
hey when you’re back in malaysia, be sure to go to mr diy. they have the type of super glue with a brush applicator. no wood sticks needed!🤞🏻
@raizone3532
@raizone3532 4 жыл бұрын
aimanfaiz here in philippine we have MR DIY store too
@felixrivera3375
@felixrivera3375 4 жыл бұрын
Great Tutorial!! 👌👌
@branchygiraffe
@branchygiraffe 3 жыл бұрын
Video was a life saver my mg kyrios shoulders got loose quick
@Freelancer604
@Freelancer604 Жыл бұрын
LOL the first few seconds I was like.. seriously.. he wants me to super glue the joints? But yeah this is a super smart and obvious fix in hindsight
@MonroesArtStudio
@MonroesArtStudio 3 жыл бұрын
This helps me. I have a kit and the arm pegs are hella loose and the arms keep falling off if there's any slight movement or vibration. Will give it a shot
@johnbobtailsquib3290
@johnbobtailsquib3290 2 жыл бұрын
This video help a lot i was having join issue with my Zaku 2 Char Costume as the hand and risk were very loose and would often fall by the weight of weapon they hold.
@atlusc
@atlusc 4 жыл бұрын
Spot on! I wanted to tighten my wing zero with super glue, but I didn't know how. I'm glad I didn't do it on my own because I was definitely going to mess it up
@LxA543
@LxA543 3 жыл бұрын
this is sooooo helpful i can finally fix my exia's loose joints
@heyitsrally5178
@heyitsrally5178 4 жыл бұрын
i tried clear nail polish, but i think this is better, thanks
@eggsanko4491
@eggsanko4491 2 жыл бұрын
This is good for kits like the seltsam or any kitbash gunpla projects! Thanks!
@diegomateo023
@diegomateo023 4 жыл бұрын
Useful tutorial! I'll use this guide for when my Kits are loose. Thanks for this amazing tutorial G 👍✌️
@kirkcabatbat9038
@kirkcabatbat9038 4 жыл бұрын
Clear color nail polish also works.
@nick391nm
@nick391nm 4 жыл бұрын
I should give this a go on my RG Destiny Gundam since there are certain parts that won't stay on and that's including loose joints too.
@diver3604
@diver3604 3 жыл бұрын
Even super glue can’t fix early real grades…
@nick391nm
@nick391nm 3 жыл бұрын
I heard that if you paint the ball joints with a gray or black it with have a better grip and no longer have the issue of loose joints.
@diver3604
@diver3604 3 жыл бұрын
@@nick391nm I usually just top coat all of the loose joints with 1 or 2 layers.
@nick391nm
@nick391nm 3 жыл бұрын
I'll have to try that out.
@vincentalpiepedrozo2337
@vincentalpiepedrozo2337 2 жыл бұрын
Hello Studio G. After I watched this video, I tried to follow this method to fix the loose joint on my freedom 2.0 mg. I applied a thin coat of super glue on one of the small pegs in the upper right arm. After the super glue dries, I tried to build the arm but the peg that I put super glue on got snap / broke.
@Nezpla
@Nezpla 4 жыл бұрын
Thanks for the tip!
@jerylcadiz9942
@jerylcadiz9942 4 жыл бұрын
This is very helpful! Thank you, Justin!
@matthewbrookeart
@matthewbrookeart 9 ай бұрын
I have an old 1994 144 scale gundam maxter from back when I was a teen, it’s arms are mega loose so I’ll have to give this a try. Wanna give it a bit of a revamp
@maritesroca2825
@maritesroca2825 4 жыл бұрын
Thank you studio g really helpful:)
@gegejumaoas5045
@gegejumaoas5045 4 жыл бұрын
This is a life saver Thx my guy you are KEWL
@curiel301
@curiel301 4 жыл бұрын
Perfect video, for the love of customization 🤙🏽
@toddcrim7012
@toddcrim7012 4 жыл бұрын
when painting a gunpla should you mask the connection points like pegs and ball joints?
@dvevilgameranwesh4254
@dvevilgameranwesh4254 4 жыл бұрын
Hey can you make a video on oo gundam
@tigerlilly6056
@tigerlilly6056 3 жыл бұрын
Thank you! I have a Sailor Moon figure that has one joint that's so loose the piece just falls out. This is an awesome idea! 🥰
@hafizizudin3645
@hafizizudin3645 4 жыл бұрын
Wow...now this will help me in fixing my justice gundam
@coldfirecreative8028
@coldfirecreative8028 4 жыл бұрын
Got any videos on care for blades and nippers or making of extra/new parts for more specialized customizing?
@jacksoncamania6064
@jacksoncamania6064 2 жыл бұрын
Thank you. Highly appreciated.😊
@jasonperry9312
@jasonperry9312 2 жыл бұрын
Thanks for the video. I am new to Gunpla. So far I only have hg kits of gundam wing. I will try this on my hg nataku it's arms are heavy when the Claw arms are extended outwards so they just drop down.
@kingofmonsterisland4968
@kingofmonsterisland4968 2 ай бұрын
Does it mess up Polly caps or no because I have a mg gouf custom with a loose arm the ball joint is loose
@TheCode-X
@TheCode-X 3 жыл бұрын
thanks, i'm building an Earthree gundam, and the saber holder on the backpack became so loose that falls apart, so this is a great idea
@kenjin8647
@kenjin8647 Жыл бұрын
Any advice on how to tighten parts that are like hooks? I am currently working on HG Calibarn and i was hoping to tighten the broom part of the weapon
@sariyana6424
@sariyana6424 3 жыл бұрын
Thank you Studio G. It really helps for my SD gundam called Sun Ce Astray Gundam from Samgoku Soketsuden. Thank you very² much.😘
@ikhmalhardy1453
@ikhmalhardy1453 4 жыл бұрын
Which is more effective super glue or tamiya cement?
@kijyazero
@kijyazero 2 жыл бұрын
This method can apply to metal part? Because i bought metal part J4 for freedom. But it loose when i plug in..
@Ball-destroyers
@Ball-destroyers 4 ай бұрын
Wouldn’t applying like a gloss clear coat be better?
@aaronou4565
@aaronou4565 4 жыл бұрын
how to clean the gunpla, dust on it, oil or duirt on it. The white part turn yellow, if you rub it some dirut or yellow thing will come out. How do you clean them
@roonis418
@roonis418 3 жыл бұрын
very helpful thank you.
@ebindelgado9660
@ebindelgado9660 4 жыл бұрын
I hope we can see you build the mg full armor gundam thunderbolt ver ka
@mrs886
@mrs886 4 жыл бұрын
have you did ever try nail polish ?
@noob_box2251
@noob_box2251 Жыл бұрын
Will tamiya cement work the same way or not?
@fhwng2212
@fhwng2212 3 жыл бұрын
is it work with other glue as well?
@Hecatonicosachoron54
@Hecatonicosachoron54 Жыл бұрын
Thank you!
@crystalclearchaos5387
@crystalclearchaos5387 3 жыл бұрын
What is this rx78 kit and were is that backpack from
@Yaboy.niw_
@Yaboy.niw_ 2 жыл бұрын
Can i use this with shoulder part?
@SazParts
@SazParts 4 жыл бұрын
can you do a weathering tutorial, and a top coat tutorial?
@gabrielsumbingco2703
@gabrielsumbingco2703 4 жыл бұрын
Can any super glue brand can tighten joints?
@trafagald.waterlaw7015
@trafagald.waterlaw7015 2 жыл бұрын
Wow so very help full thank you very much I'm so happy that I subscribe 😀 😊 😄
@cancersticks2048
@cancersticks2048 2 жыл бұрын
U think Tamiya extra think cement will work the same I got that and I’m thinking yes just wanted asking to see if anyone else has used it
@gonzaloamadorottier2065
@gonzaloamadorottier2065 3 жыл бұрын
did you use a air prush to paint that model kit? Could i get the same results with regular brushes?
@binhyennguyenkhoa2923
@binhyennguyenkhoa2923 4 жыл бұрын
Can I use the tamiya extra thin cement instead of super glue ?
@anthonyteneyck76
@anthonyteneyck76 3 жыл бұрын
My gundam's knee joint is on a slider but when I bend it too far the slider pops out but on the other leg it doesn't please help me
@LoneWolf-ys9ut
@LoneWolf-ys9ut 4 жыл бұрын
does the superglue eat away the plastic? because i use this method and it worked but from time to time the joint become much more looser than before. need help
@Kyodie-bz1sf
@Kyodie-bz1sf 4 жыл бұрын
This is useful, but I actually have the opposite problem. Can you please do a tutorial on how to fix tight joints? My Unicorns shoulder joint is so stiff I'm afraid to bend it because so think it'll break.
@taimaishu81
@taimaishu81 4 жыл бұрын
You can just sand the ball joint or peg a bit
@ngzijin4215
@ngzijin4215 4 жыл бұрын
Thank you for the tips bro! But I've got a question, does it work with tamiya plastic cement? I'm pretty sure it does right?
@Mikebtheawsome
@Mikebtheawsome 10 ай бұрын
personally I use clear nail polish but it still does pretty well the same thing
@zintMY
@zintMY 4 жыл бұрын
Hey Justin, just wondering does cements like Mr Hobby Mr Cement would work like the super glue in tightening loose joints as well?
@bhoylhogro5093
@bhoylhogro5093 4 жыл бұрын
if it's the non-thin cement, you can brush it on, wait for a day to cure, then yes it can tighten joints, but the wait time is too long and a single coat may not be thick enough so you may need to do multiple thin coats of cement and wait for each layer to cure, so it's more efficient to use super glue.
@joshuathenyk
@joshuathenyk 4 жыл бұрын
no man, u do not want to use Cement like Mr.Hobby and/or Tamiya Cements regardless of which version they sell to tighten joints because they work by slightly melting the plastic to bond/merge two separate parts together...those are for merging seamline or PS plastic. Just follow Justin's Instruction and use any good super glue on tightening joint and don't use plastic cement on joints.
@ryantimbol9758
@ryantimbol9758 4 жыл бұрын
Anyway to tighten the pre mold rg frame?
@darkclaw7009
@darkclaw7009 4 жыл бұрын
Ooooo i need this 😮
@iantrickey9039
@iantrickey9039 4 жыл бұрын
Hi there, I wanted to ask if this was an issue on the MG Sniper you did in red, white, black/grey? Mine has a hard time keeping the legs inside of the hole for the waist section. Just pops out when I pose instantly. Have a similar in the Hg version but the waist on that one does not stay connected to the piece between the legs. Thank you
@awakeningomerta
@awakeningomerta 2 жыл бұрын
Weathering tutorials next please
@poohfuu4437
@poohfuu4437 4 жыл бұрын
What if the articulation get stuck because of the glue? How did you get rid the glue?
@miragebangbravern
@miragebangbravern 2 жыл бұрын
You should leave the glue to dry before then so it wouldn't interfere with the articulation
@fingerstylesabahan8517
@fingerstylesabahan8517 3 жыл бұрын
Is there a tutorial where u can fix Barbatos iron blooded foot joint loose??
4 жыл бұрын
Gunze Mr Dissolved Putty would do the trick even better.
@heyzahid
@heyzahid 4 жыл бұрын
I’m more convince that you superglu your hair 😅😂 anyways, nice tutorial w using satay sticks, didn’t thought of it tbh 👏🏼💯
@anthonyperez1323
@anthonyperez1323 4 жыл бұрын
hi i have a question, what if i accidentally cut the part what i have to do to fix it
@ngwaikeong77
@ngwaikeong77 4 жыл бұрын
Which grade of sazabi should I buy?
@anthonyrebolledo8868
@anthonyrebolledo8868 4 жыл бұрын
Can you do the Pacific rim uprising model kits, because my gipsy avenger back wing is lose joint:(
@lonelylove2402
@lonelylove2402 4 жыл бұрын
Like thr sleek haircut
@rashyyy3243
@rashyyy3243 3 жыл бұрын
does it work on RG?
@Is2ryamoto
@Is2ryamoto 3 жыл бұрын
new supporter here
@armoredcorekid
@armoredcorekid 4 жыл бұрын
i wonder now i've watch transformer toy reviews and those guy use floor polish or pledge to fix lose joints and i wonder if this would work on the model kits
@LeoNelBuilds
@LeoNelBuilds 4 жыл бұрын
lol “oh yes..... it’s tight!”
@thaihuynh1560
@thaihuynh1560 4 жыл бұрын
what if the glue sticks on the bamboo stick and won't come on the joint?
@satansify.
@satansify. 4 жыл бұрын
thanks man
@bishmaarrayyan6386
@bishmaarrayyan6386 3 жыл бұрын
This is great
@Pottasium92
@Pottasium92 3 жыл бұрын
Can anyone tell me if it works with the fingers?
@dinopearlpetrus6150
@dinopearlpetrus6150 Жыл бұрын
How about finger join that loose sir?
@evans767
@evans767 4 жыл бұрын
You could just use a two way glhe for gumpla
@tutelnaha6081
@tutelnaha6081 4 жыл бұрын
Packing up Background​ hahaha
@nobo1682
@nobo1682 4 жыл бұрын
has anyone ever tried to rubberized joints with something like flex seal or similar product?
@abeabando2182
@abeabando2182 3 жыл бұрын
what if superglue dont work to my prime?
@sabirnini4251
@sabirnini4251 4 жыл бұрын
This is awsome
@anormalffplayer6688
@anormalffplayer6688 4 жыл бұрын
Please you have any idea
@anormalffplayer6688
@anormalffplayer6688 4 жыл бұрын
Bro I am from India tamilnadu how can I bought gundam and tools
@GunplaTalkShow
@GunplaTalkShow 4 жыл бұрын
Nice!
How to Tighten Loose Joints on Action Figures
4:44
HasBrah
Рет қаралды 18 М.
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
01:01
DO$HIK
Рет қаралды 3,3 МЛН
How to Panel Line Your Gunpla | Tutorial Tuesday
7:07
Studio G
Рет қаралды 473 М.
How To Panel Line Scribing | Tutorial Tuesday
13:05
Studio G
Рет қаралды 330 М.
Every Tool to Customize Your Gunpla
7:50
Studio G
Рет қаралды 76 М.
Easy Gunpla Tutorial - Fix Stress Marks, Damages and Blemishes!
7:55
GundamFlexing
Рет қаралды 1,2 МЛН
HOW TO TIGHTEN GUNDAM JOINTS: THE LAZY ARSE WAY! - GUNPLA TUTORIAL
10:47
How to Tighten Loose Joints aka "The Super Glue Trick"
12:19
Billy Mahoney
Рет қаралды 21 М.
Gunpla Tools - Watch This Before You Buy!
7:18
aMilla
Рет қаралды 240 М.
How To Kitbash Your Gunpla | Tutorial Tuesday
7:13
Studio G
Рет қаралды 114 М.