Studio RSR BRZ / GR86 Roll Cage

[@rubenrichardson5866]

Love the versatility for track use, leaving the roof liner in making it easy to go back to the street

[@Studio_RSR]

Thanks! We try to cater to both and make tracking safely as easy possible.

[@ktgmotorsports]

Waiting patiently for ours!

[@rappervipervevo7397]

driving positions looks a bit tight to me, guessing a bucket seat would be ideal

[@Lightshows909]

what’s the difference between the dom stainless steel & the 4130 Chromly options you guys have, want to order a white one but want to make sure this the right one

[@lambrosstamos4494]

What if I am 6'4'' and I want to fix a Racetech seat to the cage? Will we both fit?

[@Studio_RSR]

Upgrading to a proper bucket seat like the Racetech is going to give you much more room. It’s hard to say 100% that you’ll fit, since leg:torso ratio for everyone is different, but with the amount of room you’ll be gaining from a bucket seat, I would bet there is enough room.

[@lambrosstamos4494]

@@Studio_RSR Thank you, for your immediate response.

[@jasonmore5868]

What when person dashes from front side as in most cases no use of back side rollcage😂

[@lucasl7466]

Does the stock rear trunk carpet fit over the spare tire area?

[@MattGreenland]

Why are you calling this a cage? Also why so few mounting bolts and no backing plates?

[@Studio_RSR]

Same terminology as in the NASA/SCCA TT rulebooks and made to those specs; including backing plates.

[@MattGreenland]

@@Studio_RSR that good there's backing plates. Just not so hot in the limited amount of hardware. Pretty certain NASA/SCCA rulebooks use "rollbar" specifically for 4 point rollbars and not "cage." Seems weird to mix those terms.

[@MattGreenland]

@@Studio_RSR ok, so some more digging on the manuals because I'm pretty sure the lingo wasn't confusing the last couple times I've referenced it. There is rollbar specific call outs and roll cage specific call outs in both. SCCA is very specific for rollbar construction and terminology with their 'guide'. NASA puts all their construction under rollcages and has a nice crude drawing of what a rollcage looks like to define a cage specifically.

[@CPE-j1u]

Unfortunately, it looks the roll cage is too much forward for taller drivers 😞

[@Studio_RSR]

We made a Version 2 for our long-legged owners: studiorsr.com/products/studiorsr-gr86-roll-cage-roll-bar-v2

[@CPE-j1u]

Great - Thanks - well done cage@@Studio_RSR

[@BIGBROTHERiswatchinU]

@@Studio_RSR At 6'6" tall I have to put the seat in the BRZ as far back as it can go. Will Version 2 allow that?