Thank you very much for that shout out , much appreciated ❤
@Tim_Bassett4 ай бұрын
I don't have an instawotsit account, however good luck in the comp - I'm sure all the practice will pay off 🙂
@sub12airgunners4 ай бұрын
your welcome mate
@Tony-o1b2 ай бұрын
Perfectly done for Sub 12 application.
@sub12airgunnersАй бұрын
Thank you and thanks for watching 😁
@three-phase5624 ай бұрын
Nicely machined item, will be interesting to see if there are any more performance improvements for this rifle. Will check out the article when I get a bit more time, thanks for the link.
@sub12airgunners4 ай бұрын
thanks 😀👍
@leec85924 ай бұрын
Great video on making a better valve for sub12 use and as always, quality machine work. The original TP was huge! Thanks for sharing the video …
@sub12airgunners4 ай бұрын
yes this gun would make some power in FAC for sure, thanks Lee
@rumengergushki7260Ай бұрын
Amazing machine work. What lathe tools and inserts are you using?
@Tim_Bassett4 ай бұрын
Nice to see the EPIC back - I do like the idea of that valve - the results will be interesting on the closing speeds and the effect on efficiency. 1.7 bar a shot still seems a little high, but a real jump forward from factory :-) Keep up the good work, and thanks for the videos.
@sub12airgunners4 ай бұрын
thanks Tim we hope to get a few more shots out of it yet 😀
@rayingles14 ай бұрын
Brilliant I learn something of the internal workings every time. Love your work.
@sub12airgunners4 ай бұрын
Many thanks!
@redgum13404 ай бұрын
Very clever work. Thanks for teaching us all.
@sub12airgunners4 ай бұрын
My pleasure thank you for watching
@PaulSmith-jr1qe4 ай бұрын
Nice bit of engineering as always, but the best part is yet to come as when you increase the diameter of the vent to the rear of the valve potentially you loose a little surface area for the air to push against, it will be something of interest to a lot of airgun tinkerer's out there.
@sub12airgunners4 ай бұрын
nice one, not to many people think about things like that we started small so we can work up but it will be interesting 😁
@TurkishTinkerer4 ай бұрын
Ahhhhh it has returned 😁 looking forward to this one chaps.
@sub12airgunners4 ай бұрын
thanks for watching mate 😀
@ian-petersimpson15654 ай бұрын
The Abom of airguns - impressive, as always, chaps!!
@sub12airgunners4 ай бұрын
thanks for watching 😀
@paulspeller9684 ай бұрын
definitely interesting . i guess most of there gear is aimed at the higher power market so its easier for manufacturing and price to make one valve fits all so to speak . great job mate . and what a cool name spindexer that’s for sure . almost as good as sharp pointy thing but not quite 🤣🤣
@sub12airgunners4 ай бұрын
🤣🤣 yes sounds like something a 70's disco 😂 yes this gun was built for power for sure
@noelwallace52574 ай бұрын
Nice work, I enjoy every minute of your videos 👍🏻👌🏼
@sub12airgunners4 ай бұрын
AwesomeThank you😀
@casperboo54654 ай бұрын
First class work as always Jeff, thanks as always for sharing with us Cheers 👌👌👌👌👌👍👍👍👍👍👍👍👍👍
@sub12airgunners4 ай бұрын
Glad you enjoyed it
@ShayanQuanta4 ай бұрын
Do yo have blueprint?
@ramjamfull52 ай бұрын
yes we have all got the tools and engineering skill to do that
@bashm57673 ай бұрын
once again,great video well explained as expected👌🏼
@sub12airgunners3 ай бұрын
Thanks again!
@2speed8184 ай бұрын
Another good video sir, best of luck to ya Christopher 👍
@sub12airgunners4 ай бұрын
Thanks Christopher 👍
@tonythorne46232 ай бұрын
Great video excellent narration.
@sub12airgunners2 ай бұрын
thank you
@stephenwallace24234 ай бұрын
👍👌 Excellent stuff!
@sub12airgunners4 ай бұрын
thanks for watching 😀
@nikolajovanovic74192 ай бұрын
awesome work
@sub12airgunners2 ай бұрын
Thank you! Cheers!
@brorjordas19794 ай бұрын
Sweet!
@sub12airgunners4 ай бұрын
thanks for watching 😁
@eoinwestman62224 ай бұрын
Very good video. Very clever.
@sub12airgunners4 ай бұрын
Glad you think so👍
@myadventureman26364 ай бұрын
Good , very precicision.Thks😊
@sub12airgunners4 ай бұрын
thanks for watching 😀
@peashooter9504 ай бұрын
Okay so SUB12 valve,,,, i had a feeling it was something like this you talked about. But i am FAC, so i just watch video none the less, and throw my thumb in the air. BTW are these regulators meant to be so hard to turn, mine is damn hard to turn VS a FX, but the regulator work just fine no issues there, but adjusting / turning it OMG someone need to make a more sizeable adjusting key / tool 700 mm long 4.5 mm CZUB barrel performing well 🙂
@sub12airgunners4 ай бұрын
thanks for watching 😀 yes the reg will be stiff to turn especially when you have high pressures 👍
@static-xfan12444 ай бұрын
Awesome dude 🤟
@sub12airgunners4 ай бұрын
Thanks ✌️
@jeffhello14443 ай бұрын
nice one
@sub12airgunners3 ай бұрын
thank you for watching 😀
@marouaneladjel19074 ай бұрын
Exceptional
@sub12airgunners4 ай бұрын
thank you
@airgunslugslingers4 ай бұрын
👍👍👍
@sub12airgunners4 ай бұрын
thanks for watching 😀
@kempy95844 ай бұрын
Nice 👌🏻👌🏻👌🏻👌🏻👍🏻
@sub12airgunners4 ай бұрын
thank you 👍
@jaelanlan98002 ай бұрын
Thank you very much, I am indonesia,pengen senapan import tp blm punya uang
@lisawood5164 ай бұрын
😊😊
@TheAsa19724 ай бұрын
Bit of Edgun in there
@sub12airgunners4 ай бұрын
the reg looks very similar 😁
@TheAsa19724 ай бұрын
@@sub12airgunners You need to talk to this man Симуран He does answer emails ,Mods for the Leshiy
@-AIMTEKАй бұрын
👍🏽👍🏽👍🏽👍🏽
@sub12airgunnersАй бұрын
thank you
@Piupiu68az4 ай бұрын
🙃
@BintangSenapanАй бұрын
Slm kenal bg
@RaleignEli-h7lАй бұрын
Thomas Deborah Walker Susan Hernandez Jessica
@Alloutairguns4 ай бұрын
Sir I would like to speak to you over a telephone is this possible?
@danbrown62554 ай бұрын
Great content Have you thought of doing youtube shorts
@sub12airgunners4 ай бұрын
yes we are going to try to do some 😀 thanks for watching 😀