ASMR ENGINE BUILD | Subi-Performance

INSTAGRAM: / subiperform. . FACEBOOK: https: // subiperformance/ WEBSITE: https: //www.subi-performance.com/ With the videos I give you an insight into my work. Subi-Performance Engine manufacturer specializing in the construction of Subaru high-performance boxer engines. Most of the tools I use are from Würth and the measuring equipment is from Mitutoyo. Main Camera: Panasonic Lumix G DMC-GX8H Action Camera: GoPro 4 Hero Session

[@cloudninephoto]

Every time I watch you do an engine build I imagine myself walking into the workshop, then leaving with my perfectly built engine to install in my own car !! Oh well, dream on !!! Great work.

[@tacoslabomba9419]

You are by far the best video out there for ej rebuilds. I have an ej205 that I want to rebuild and your videos are a huge help. I watch your videos to relax. Your videos are awsome. Thank you for letting us watch you work. Hello from America.

[@goncalol.8195]

This man is the best engine bilder on KZbin Respect that man

[@Роман2131]

Goncalo L. Conditions for work good + plus diligence. German pedantry)

[@popeyeman69]

Such a pleasure to watch you work. It's not every day you get to watch a master mechanic do his thing.

[@jnat7806]

Thank you for giving me the courage to rebuild my 2005 xt Short block! I wish you where doing the machine work friend.

[@TheGamer-ux2lr]

Thanks for posting! It's so strange how relaxing it is watching you assemble those beautiful engines.

[@tomchenn]

Es ist so entspannend dir beim Motor zusammenbauen zuzuschauen

[@plueschAMAZONE]

Keule ganz ehrlich: ich könnt ewig zusehen, wie Du Dichtmasse aufbringst. Endlich mal jemand der weiß wie viel von dem Kram da hin gehört und ne raufklatscht nach dem Motto: viel hilft viel!

[@adriancea6668]

Gracias por mostrar tu trabajo Desde Chile te seguimos y admiramos lo que haces, saludos

[@Lukedormer]

You know someone’s good when they can guess the filer gage first go 🙌🏻

[@Paul_VanGo]

After building engines myself for numerous years, it amazes me again and again that I enjoy watching someone else doing that same thing. It's probably, because I enjoy a professional building the engines properly, instead of some hysterical kid throwing an engine together in a cringe-worthy manner in his parents garage. And nice too; no blasting "music" either!

[@gammalight1312]

These videos make the world a better place Thank you! Diese Videos machen die Welt zu einem besseren Ort Danke dir!

[@SubiPerformance]

Gamma Light ❤️🚀🚗

[@Bloodline2009]

Another perfect build. Learning a lot that's for sure! Thanks from the UK ;)

[@Jason_Laster]

Always have fresh bbq sauce available to lube piston rings😄 Another great vid!

[@BP-fx3qc]

Beautiful cross hatch on those cylinders

[@andytran7877]

The work at the hands of a master! . .

[@Use_2024]

Hello from Russia! Good job! Like

[@jevgenifirsov4165]

Good job! Nice to see how work a really good specialst.

[@lelio1979]

You are amazing, man! Fantastico!!!! Ciao

[@thereissomecoolstuff]

Big fan, can you show the various sealants that you use. Also if there is a North American equivalent. The Europeans get the high quality product and material thing. It can be tough to source them on a local level. Keep them coming. It's definitely about your work and style and shop practices that has many watching. Thank you for doing it the way that you do.

[@ericnickel3280]

I wish there was someone out there who took videos like this while building the VAG 1.8T's.

[@Waranus36]

Mesmerizing! This is art!

[@forfuno]

love watching your videos, keep going

[@Sireristof1332]

I hope really we gonna see a H6 someday or even the 2.0D would interest me as well. no ones gonna build that one for performance tho

[@petrmiskerik]

awesome dude, thx for great video

[@turredj]

@subi performance: you guys should record engine build video with stereo mic and then tag it as an ASMR video :) . Anyway, thanks again for an great video !

[@RLTPDX]

You have video, where you finish the whole process, I mean the installation of the engine ( engine - transmission ) in the car and connection of all the electric wire and the ignition

[@nikolasvelezis3755]

Man another great job!!!The piston ring end must align or not ?Thnx

[@troyfankell6581]

Really nice attention to detail! How do you like the Mahle Motorsport powerpak pistons? I'm assembling my EJ257 with these and everyone I know uses the other big manufacturers.

[@alfredomorfin828]

Would love to see u build a fa20 motor

[@victorweiss427]

Excellent. Thanks a lot. Really relaxing video. What is it indicated in 4.17?

[@ManuelRamos-ui9yz]

Un trabajo increíble

[@extremguzey1327]

Nice video,thanks man.

[@woodzy575]

What weight of engine oil do you like for an EJ257 driven in warm weather only? Great videos, thanks!

[@hpkntnw]

I know you’ve done this many times at this point but in the beginning how many times did you drop that wrist pin retainer clip into the block?

[@fw1421]

Subaru needs to build a flat six and give Porsche a run for their money.

[@hellohun7331]

fw1421 I think they did for awhile, and may still.

[@f1owerz326]

Great Video again ! What application is this engine for ? What is this engine capable of power wise ? Also did you say you sell that assembly grease ?

[@insanitybe]

Flower George on his website subi - performance .com

[@PropKnucklesFPV]

No ringland failure here, kiddos.

[@theaustinite5320]

Nice so nice only jealous people put dislike.

[@Gravel-79]

Great video 👍 What brand piston did you use in this build?

[@SubiPerformance]

mahle motorsport ❤️

[@Briat763]

@@SubiPerformance So weird, you can buy everything you need on their North America website. But not on the European one -_-

[@9MMSWORD]

Very relaxing

[@domil6820]

Mecanic for sleep oulala no !!!! yes finaly .....

[@Jimmythekid007]

Great Dr. Car Motors.

[@antonhsvlassakhs988]

subi my friend your job is perfect ... I would like to see you and a close friend from Greece.

[@bernardovti]

Awesome !

[@Mountain-Man-3000]

Is this going to be naturally aspirated? If not, why use an open block?

[@jeffbecker8716]

Where can I get a step-by step list of everything you do including all of the materials, components, and special tools used? If you put it in book form, I would gladly buy a copy.

[@jeffbecker8716]

Also would like to know the differences in block numbers/ castings, and recommended heads/ head combinations. Thank you.

[@juanpabloecuador]

Magnifico!

[@dmitriif.5863]

Чувак ты бог.

[@РоманВиллопото]

Волшебник)))))

[@olezkaas]

Bravo.

[@revizz1_430]

Congratulations, beautiful work! I have a question, what material do you use to lubricate the bearings? (9:40), Where do I find?, Is it possible to enter the name? I do not find anything similar in my country Thanks for any reply!

[@SubiPerformance]

www.subi-performance.com/product-page/redline-motoren-montagepaste

[@reynolflores2337]

Gracias por kompartir una preg donde consigo las refacciones y las herramientas p repararlo gracias por informaciones

[@KDD8]

Where is the dog

[@Bizarado]

What is the red paste you use on the bearings called?

[@Tobias.Ruebin]

Was ist das eigentlich für ne Paste die du auf die Hauptlager aufträgst mit nem Pinsel?

[@santiagoa99]

Why do you mark the screws after adjustment?

[@9MMSWORD]

He marks them so he knows that he torqued them down properly and also if someone decides to disassemble the engine later he'll know that they touched the bolts

[@90slegends49]

Being open deck engine, how much power those engines can take?

[@eyupdolek3747]

Perfect👍😁

[@steezosaurusrex]

open decks make me cry

[@aladin3502]

Owesome❤❤❤❤❤❤❤❤

[@briantag5948]

Should be building Porsche engines.

[@hamoudazipie]

😍

[@davidnaubereit1730]

Wenn das ganze auch nur halb so schön ist beim machen, wie beim zuschauen, muss du sehr gerne arbeiten gehen xD

[@BrentKung89]

Do you build EZ30s?

[@SubiPerformance]

no problem

[@rafalsagol9504]

Schön

[@VENUEATHENS]

What's the tube of gasket maker being used in the beginning?

[@VENUEATHENS]

@Ro Bert I was just wondering if it were some aftermarket brand.. .

[@endrizzi1000]

German perfection...

[@GaspardDugit]

nive vid man !

[@jeffbecker8716]

@15:36 - what is the purpose of that little bolt?

[@troyfankell6581]

To seal the block halves at the oil gallery.

[@jeffbecker8716]

@@troyfankell6581 Thanks, but it is just so small that it doesn't look like it is really necessary.

[@troyfankell6581]

It may seem small but it is definitely necessary.

[@jeffbecker8716]

Guessing that you don't paint your completed engines? Not even a clear coat?

[@sahipalbawe7603]

hi

[@abdulkadirs.5596]

Amk nerde bunun devamı