Sublimating Skinny Tumblers Using a Shrink Wrap

[@kimhall202]

Which size shrink sleeve please or what's the link to these?

[@jerridyke68]

Good tips. Thank you @JPPlus,

[@djm0613]

If your having a hard time finding the template he mentioned click the link in the description for the tumblers it’ll bring you to their product page and scroll down and look for downloads and the templates are there.

[@laurakerby8156]

Where is the link?

[@gillgardiner4049]

Can u use this in a cricut mug press please

[@lachondranevins8670]

What is the brand/model of the convection oven that you are using?

[@alicepittman4511]

What paper did he use before the sleeve

[@gmfigueroa7]

can you add a link to the shrink wrap that fits the 20oz tumbler

[@sharisalee6347]

can you use a hair dryer instead of a heat gun?

[@rebekahchambers9422]

If the shrink wrap is melting off in the oven is the temp too high? I'm assuming it is but I new to this and was wondering why sometimes it will pull apart and most of the cup isn't shrink wrapped any more! Very helpful video!

[@lindascraftsandthings915]

Hi, it would be helpful to have closed caption for the hearing impaired.

[@juliestylinski4145]

Absolutely!! I’m deaf and it’s frustrating when many videos are not subtitled!

[@RebbekkahMalynn]

Sameeeee!!

[@TheFamilyshow]

Can u use a microwave instead ?

[@joyjones9965]

Can you please tell us what size shrink wrap that is for your tumbler

[@jbrondos]

What if you sublimate the tumbler without the shrink wrap? Am I correct in thinking that the shrink wrap comes OFF the tumbler with the sublimation paper after being in the heat press? The shrink wrap is just to hold the design tightly on the tumbler?

[@alexasalguero3139]

I have a question why does my shrink wrap bubble up when it’s in the oven?

[@37moves]

Just to clarify what Dee Ryan says about the location of the template... Navigate to the product page (16oz or 20oz tumblers). There are three hyperlinks in the video description. Two of them are for the tumbler product page on their website. Once at the product page, scan the PRODUCT DESCRIPTION for information TABS. The tabs are named "OVERVIEW, DETAILS, AND FINALLY DOWNLOADS. The template size seems to be married to the size of the tumbler you navigated to on their website. I hope this helps you find the DOWNLOADS button faster than I did.

[@charlenecarmichael4588]

Hello. Can you also use a toaster oven? If so, what temperature and how long. I see your video is 400 for 6-7 min.

[@roselynmorales2496]

Doesn’t the shrink wrap sticks on the conversation oven grill ?

[@jessicabravo1821]

My question is do the cups or tumblers be regular ones or do they have to be sublimations tumblers?

[@JohnsonPlasticsPlus]

Hi Jessica! They must be sublimation tumblers for the ink to work.

[@jessicabravo1821]

@@JohnsonPlasticsPlus thank you 😊

[@ncartsyfartsycraftsandsuch]

why do i get Ghosting. I can’t seem to get my paper tight enough around the cup I guess. I’m Sublimating with shrink wrap and in a convection oven

[@juliestylinski4145]

At 400 degrees? How long? Thanks!

[@philippaw9959]

My shrink wrap melted all over my oven…. Any ideas why?

[@JosephCampbellSolutions]

Where is the download section on the website.

[@JohnsonPlasticsPlus]

When you are viewing a product on our website there is a tab that says Tech Docs/Downloads!

[@kaylarogers1964]

Do you suggest flipping them ever? I do with my mugs, but I am feeling if I do not use a mug wrap this would cook evenly?

[@monicasilvers1762]

Hello, do you have a silicone wrap?

[@Tabascopeppers]

Hey! I keep seeing videos where people turn the tumblers halfway through the time but you didn't. Is turning really needed?

[@everssosweet3223]

Can you tell me about the oven you use? Where can you get one

[@libertygeneralstore8298]

Will a 30oz work?

[@kimhurd484]

Will this still work in a regular oven? And if so are there any changes to the temp and time?

[@meg2068]

Never sublimate in an oven that’s used for food. The gases released are toxic.

[@Urmyseoulmate]

@@meg2068 so once we sublimate in our convec oven thats it we cant use it to cook our food?

[@brittneyrhae6013]

@@Urmyseoulmate correct. The gases released into any oven are toxic

[@Urmyseoulmate]

@@brittneyrhae6013 ok got it thank you

[@Urmyseoulmate]

@@meg2068 thank you:)

[@janethuser8064]

Steve, I have a question… I have the same oven that you have on the counter. Do you set yours to bake @ 400 or do you use the turbo convection? My shrink wraps are melting to my tumblers. I do bake @ 400 for 6 minutes

[@JohnsonPlasticsPlus]

Hi Janet, after our team has done some more testing we would recommend trying a lower temperature, 320-330 degrees without the turbo convection.

[@janethuser8064]

@@JohnsonPlasticsPlus ok, thank you!

[@lisam123456781]

What size is your paper

[@ohheycarissaj5661]

I can't find the template you mention for the dimensions of the wraps.

[@dustinmsellers]

I can't get mine to be so glossy? They come out dull,,, I'm using sub ink and paperm

[@Urmyseoulmate]

What if we dont have a heat gun?or where can we purchase and what are the measurements of the sleeve we need for a 20 oz tumbler on your website?

[@Arks_Adulatory_Creations]

What size shrink film do you use for 30oz tumblers.. and 20oz tumblers..

[@jazzimat]

My question too, they don't seem to respond to anyone, annoying!

[@reneej1577]

Question..do you HAVE to use a shrink sleeve? If you do need to, are there non plastic, or at least environmentally safer (biodegradable) options that will work?

[@melissag4291]

Is the template available yet? Could not find it.

[@pattygobin2852]

I was looking for it too and don't see it.

[@pattygobin2852]

Ok...you have to go into the product page and then in the middle there is a download tab.

[@melissag4291]

@@pattygobin2852 Ok, I will go back and look again. Thanks!

[@johannasariov9450]

@@pattygobin2852 i can't seem to find it :(

[@djm0613]

If you click the link in the description for the tumblers it’ll bring you to their product page and scroll down and look for downloads and the templates are there. Took me a few minutes to find it my self.

[@swingingstars11]

Thank you

[@shannonwinkler8524]

One at a time is all you can do?

[@kabeshawalton9968]

Two questions please: 1. Why is the shrink wrap melting in my conventional oven 2. Is there anyway to remove the melted shrink wrap from my tumbler?

[@JohnsonPlasticsPlus]

Hi Kabesha, after our team has done some more testing we would recommend trying a lower temperature, 320-330 degrees without the turbo convection. That could be why your shrink wrap is melting.

[@Laurenjoinsyoutube]

Can you use a regular oven or a heat press?

[@shariyahmombaker1177]

I don't think so. But some heat presses come with mug press

[@rebecarojas2781]

You can use a regular oven as long as you don’t cook in the same oven

[@kelleyh8141]

What convection oven are you using?

[@daniellerance3680]

What type of convection oven are you using?

[@JohnsonPlasticsPlus]

The oven featured in this video is an Oster Extra Large Convection Oven.

[@thinkhardmore0125]

My kitchen oven is a convection oven. Can I just use it?

[@chrylmiller]

no.. once you use it for sublimation.. you should not use it for food

[@TheWesleys]

Would love to review your tumbler shrink wrap! We are trying to do reviews on different products!

[@JohnsonPlasticsPlus]

That would be wonderful. Thank you!!

[@sandraleos6125]

Do you know why my shrink wrap would have melted?

[@JohnsonPlasticsPlus]

Hi Sandra, it is possible that your temperature could have been too high. Our Advanced Support Team would be able to help you figure it out. You can reach them by calling 800-869-7800 or emailing [e-mail].

[@nadeinventura6115]

Do you need a certain printer

[@JohnsonPlasticsPlus]

Hi Nadein...great question! Yes, you'll need a sublimation printer to decorate these skinny tumblers. If you're not familiar with sublimation, we have a quick video that explains the process here: kzbin.info/www/bejne/rmjWhYiaoahngdk

[@silentredbarn6617]

Can you make closed Caption so I can understand what you are saying. I am deaf

[@eduardohernandez6881]

What the real measure of the image to print and sublimate a tumbler of 20 oz like that one? Thanks…by the way my paper is 11x17 SG1000 machine

[@JohnsonPlasticsPlus]

The print size with bleed is 9.375" x 9". The actual sublimatable area on the tumbler is 9" x 8.5".

[@eduardohernandez6881]

@@JohnsonPlasticsPlus what do you meant “Bleed”…?thanks and sorry for make to many questions

[@JohnsonPlasticsPlus]

No problem! "Bleed" means we print the image just a little larger than the area we're pressing to...in this case, just a little bigger than the area that's available on the tumbler. This allows us you to make sure you're getting full and complete coverage.

[@eduardohernandez6881]

So in coreldraw I have to put 9 inch x 8.5?? The same thing at the print manager app?? My paper is 11x17 by the way..

[@JohnsonPlasticsPlus]

@@eduardohernandez6881 We recommend making the size bigger to allow the bleed areas, so it would be 9.375" x 9" for this product.

[@lindanavarro1196]

Are you using sublimation paper to print image?

[@JohnsonPlasticsPlus]

Hi Linda...great question! Yes, standard Johnson Plastics Plus sublimation paper was used for the transfer.

[@stephaniewoodruff9580]

Can't find the template

[@djm0613]

If you click the link in the description for the tumblers it’ll bring you to their product page and scroll down and look for downloads and the templates are there. Took me a few minutes to find it my self.

[@josephinejacobs2159]

Have you tried doing sublimation by using an air fryer?

[@JohnsonPlasticsPlus]

Hi, we haven't tested this technique on our items.

[@krismattmatt8476]

67 minutes in the oven?

[@HowiesStuff]

6 to 7 minutes

[@sexyhypnotiq8233]

stainless steel tumblers can be used for sublimation

[@da2haviland]

How?

[@bethbennett476]

My shrink wrap started melting. Maybe I just got some cheap wrap.

[@Mylyfeaboss]

mine did as well did you find better shrink wrap?

[@Kuztom_kraftz]

Has anyone tried these tumblers

[@LadyP1225]

Yes! Just received their 20oz. white straight tumblers. They sublimate beautifully!👋🏼

[@chrylmiller]

I did. I did as he instructed. 400 degrees at 6.5 minutes.. it looks washed out. I'm going to try again today

[@glendalopez2020]

Which size shrink sleeve please or what's the link to these?