Sublimation Issues & How to Fix them QUICKLY!

[@xx-ce9nq]

Thank you very much. I used the cricut mug press and I saw some black dots on my mug and Ive realised that its dust/lint so I decided to press the mug quickly when taking out of the box. Also when it comes to faded images, it wasnt my printer but because i didnt stick it properly

[@zeljkoduza7177]

Thank you so much but I’m getting markings on the t- shirts if I go low pressure. Problem is if not enough pressure is applied image is not good enough and if I apply medium pressure I get markings like you explained in last part of the video.Currently using A-sub A3 paper and 6.5 turns on standard press machine 196c temp for 65sec. So frustrating to get markings off as it seems that is impossible. Any less pressure print quality is so bad. Any idea how to fix it. And again thanks so much. Fyi using Mac And epson workforces wf-7830 converted to sublimation

[@anthonyblanton5804]

This started toward the end of December so I wonder if an update changed something but can not find it if it did ! When I make a PNG in canva and let’s say it’s pink or red or yellow any color really and send it to my Epson 15000 for sublimation it comes up in print preview and 11 by 17 is the worst it put little black makes around the picture I have made on the edges only not completely but a lot and on 8 1/2 by 11 there is really none I mean it’s doing it when it sends to printer before I print the paper and if print preview shows it then it prints it on the paper that way! I can’t figure it out ! Can you help ? Any ideals ? Thank you for your help !

[@warrente66]

there is another problem I encounter, evertime I press with the sublimation paper, it leaves a mark on the teflon paper that I put on top, and if I use that teflon, that mark will press on the next shirt I press, so what I do is put the sublimation paper then a bond paper, then a teflon paper. but I notice that others don't do that. what could be wrong on my sublimation paper? I am using quaff

[@OrganicGlow918]

I'm doing dtf sublimation shirts and the image is smudging when come in contact with water 😢

[@jamesbrock7908]

My colors are coming out way too light. Is there a way I can email you to get advice

[@freddycuba8298]

My black comes out a bit burnt compared to all my other colors the rest come out perfect just black comes out a bit burnt ?

[@mohitlohan_]

Did u find a solution

[@jamesbrock7908]

Is there a way I can contact you

[@lindagreen9379]

When I press a sublimation image onto my shirt. I get what appears to be splatter marks around the image.

[@amycreates1075]

It sounds like extra ink is splattering onto the design when printing and then showing when you press it. What printer are you using? I would try to clean the print heads and see if that helps at all. I have had this issue and to be honest when I switched to my sawgrass printer that fixed my issue.

[@rachelcuevas4460]

How to fix a gap on mug. Ends of proper did not meet

[@amycreates1075]

hmm in that case, I don't think you can do much about that one. You might have to count that mug as a loss and use another. I have yet to find a way to fix that issue. I have re-sublimated wine tumblers with darker images but if the entire mug is already sublimated that would be hard to cover with another image.

[@zeljkoduza7177]

Made by Casual Classic UK made

[@zeljkoduza7177]

Sorry to add 100% polyester t-shirts

[@ralphstrong3117]

ρяσмσѕм 😞