SUN GTIL2 2000 watt Inverter with limiter disassembly and tips

Disassembly of the GTIL2 2000watt inverter with limiter, teardown all the way to get the MOSFETS off and a couple tips that I learned while playing with this things.

[@dSquared0162]

Look forward to the follow-up!

[@NealBassBari]

Thankyou for this description of how to disassemble it. I have a DC power short that literally exploded the DC fuses. Now to figure out which FET is shorted.

[@naturafibre7905]

I found your video after my inverter (same brand and type) broken by lighting induction (my bad for not install surge arrester). I guess I'll try to repair myself. I've seen inside my inverter, apparently one of the mosfet blown and got chipped.

[@kosmaskarzis7569]

Hello Can you tell me the type of trike you changed because mine has the xnt24n60ti and I can't find it on the market, is there a ripleismed type? thanks

[@viocaia]

Hey! Thanks! Do you have any idea at what voltage are those input electrolytics rated?

[@patriot_trd_bros2274]

If you asking about the large DC Capacitors, they are 100v at 1000uf

[@viocaia]

@@patriot_trd_bros2274 Thanks! I have my panels delivering 100V+...so it's looking like I need to rewire my PV in order to use GTIL2000 on the way..

[@GarryL277]

Hi I have one of these and it just stopped working. I see the DC input reading of my battery on the display but I have 0 volts on the limiter and grid voltage readings on the display. Can you offer any advise or help please?

[@D2eej]

Can you tell me what the mosfet code was for the inverter.

[@honeybadger6127]

mine has been running at half power for a few days... any idea what might be the issue?

[@michaeljames7415]

Hi erm I hope that you can get back to me so on the same inverter two resistors blew up on the underneath of the circuit board and I cannot find anywhere what the two are so I can fix myself please could you let me know what ones they are that are next to the other two r030 resistors. Thank you

[@sang3Eta]

Thinking about buying one. How long do they last for?

[@patriot_trd_bros2274]

I've had one almost two years now, If learned that you must have surge and over voltage protections on both AC and DC. They are very sensative to nearby lightings and power surges. Also keeping them cool is a must, I cooked one up for letting it be in a hot environment.

[@Pyper80]

it is possible to connect a storage battery to this inverter adding a charge regulator?

[@carlosmedrano8656]

If you mean a charge controller, yes. I actually use three Ford Escape hybrid battery packs converted to 72 volts and a 60amp solar charge controller.

[@eletromanjimenez2066]

Hola Carlos donde te encuentras tengo problemas co mi inversor gtil2 . Genera y degenera . Watts sube y baja.

[@patriot_trd_bros2274]

West Texas

[@abrahamortiz2519]

Saludos: Varias preguntras donde te puedo escribir?

[@krilledellis]

Mine is shorted at mains side do you now what the problem is

[@usuariouser224]

It doesnt work😢

[@user-tt4qo7gy1j]

I like the video it's just too slow I don't want to watch a man take out screws

[@templar3540]

sir please write.down the number of the mosfet and IGBT.. whats the number of the mosfet attached to the heat sink? also whats the number of the IGBT in the bottom? thanks