Sunex Tools , are they good enough for a mechanic?

sunex 38 piece bit kit
amzn.to/3veL5KU
sunex line wrenches
amzn.to/43g3jsb
sunex pick up tool set
amzn.to/3TI8uhz
sunex socket set 3/8
amzn.to/43hA2x2

[@SUNEXTools77]

Thanks for your review and thoughts on our tools! Glad to see they are keeping you happy and working! FYI, we are based out of South Carolina.

[@classiclinesautomotive]

Love yalls tools and thanks for the heads up on the south Carolina info .

[@berningsandwiches2662]

Their impact sockets and bits are top notch. Maybe not Snapon, but as good as Mac or Matco.

[@classiclinesautomotive]

I absolutely agree to that

[@dylanmeade5583]

Their stubby wrenches are dirt cheap and work well for me in heavy truck work

[@Tcorellis-j6d]

Like wise I picked them up because they went up to 1” in the stubby where everyone else stopped at 3/4. The 7/8 and 15/16 is nice for eaton transmission lines at the bottom Back of the radiator when the stupid support mount for the radiator is in the way Brake it free with a regular sized wrench but back it rod with the stubby love them

[@classiclinesautomotive]

Hell yeah man

[@bikerdad2479]

I have a few of their 3/8 swivels as well some of their crows feet. I haven't had to warranty any yet and some of my 3/8 swivels are over 10 years old my step dad actually handed them down to me a few years ago. I have added a few deep swivels to the collection. The Cornwell guy who comes by my dealership actually sells them as a cheaper alternative.

[@jamesupton143]

Get you some Evap-o-rust and soak those pliers for about 24 hours. It will clean them up and loosen them up. Then take some steel wool to loosen the black oxide off. Wipe down with a lite oil and you'll be set. Sunex makes some good tools. I have several sets and extensions made by them. I'm just a dyi guy but you try to buy the best you can. My dad told me to buy quality when buying tools. If not you buy three or four times before you buy something that will last.

[@ElectroAtletico]

...AND THEN...spray "Fluid Film" to prevent rust.

[@A_Sense_Of_Purpos3]

Sunex makes some great stuff

[@enragedplantera5585]

I have sunex s wrenches offsets angles and stubby ones there all amazing

[@ThePig087]

I've used the same 3/8 metric impacts for 25 years along with 3/8 and 1/2 impact swivels. Haven't broken one yet. Love Sunex sockets. And that bit set is killer too.

[@classiclinesautomotive]

Hell yeah man that's awesome

[@gregblau8082]

I've had the 3/8 master set for probably 8 years. Broke a universal and the warranty couldn't have been easier. When I got them I was wondering when I would ever need a 3/8 drive universal 22. That day

[@kristianarnold3165]

Been using Sunex and Capri stuff heavy and it flat out holds up tough

[@classiclinesautomotive]

Hell yeah I'm glad you've had good luck with those brands

[@kristianarnold3165]

@@classiclinesautomotivelove the videos like this brother keep on going 💯

[@markmccue8472]

I work on heavy equipment and trucks so I have a bunch of their jumbo combination wrenches to beat on when I don't want to ruin my 30 year old SK jumbo set. I also have that same deep 3/4" air chamber caging socket. My 1" tire gun was a sunex it just got stuck in forward after about a decade of abuse. I'm going to look into that drive line socket thanks for the tip.

[@draffa5798]

The only thing I have from sunex tools is their impact sockets. I've never had a problem with them. I don't know how their warranty is. Hopefully I won't need to know lol

[@RandyJurgens]

Great video, I have some of the larger four angled wrenches and combo wrenches and had a problem 👍👍🔧🔧😀😀. Sorry I should have checked my reply before I sent it.Never had any issues with the angle wrenches or the combo wrenches.😚😚

[@classiclinesautomotive]

Greatly appreciate it . You did have a problem ?

[@RandyJurgens]

Sorry no I never have any issues with the angle or the combo wrenches. I should have checked my reply before sending.

[@Cumminsproject01]

Sunnex is great id say the best thing sunnex has going for them is definitely their sockets ive got 1/4 magnetic sockets, 3/8 impact torx i have broke one the t50 but i was hammering it pretty hard trying to get a seat belt bolt out that was blue lock tited in so it is what it is not to mad about it ive also got 3/8 impact universal sockets that have been fantastic ive got sunnex deep wells and gear wrench shallows i actually love both haven't broke one yet and for the price you cannot beat it no way am i paying snap on price for like a 5 piece socket set that skips sizes i could but 5 sunnex sets and you know what they work and they work dam good.

[@ericpleasant7722]

Hell yeah! I thought I was the only person in the world wrenching to Aesop!

[@classiclinesautomotive]

To think I thought I was the only one as well . Good taste my friend

[@scottgardner6542]

Thanks for your thoughts. Sunnex is a solid brand for sure. I appreciate your realistic views that take into consideration budget/function/quality.

[@WHATDATTOOLDO]

The impact sockets are amazing wrenches are mahh and price reflects

[@classiclinesautomotive]

I do love thier sockets I have two sets of thier wrenches and for that I use them for they're decent . I prefer tekton wrenches though

[@spacecat7247]

I usually listen to classical and nightclub(vintage)style jazz. But most anything. Depending on my mood.

[@rudydaberry122]

My Matco dealer sells a lot of Sunex. He says Matco ADV is made by Sunex

[@classiclinesautomotive]

My gearwrench guy sells alot of sunex as well haven't seen a matco truck in a hot minute

[@richardbates2367]

Late 60's early 70's and 70's through the mid 80's and some 1990's almost everything classic rock,soft rock, heavy and def metal, country and classic country, some rap, RnB and hip hop, mostly classic and southern rock, AC/DC,bad company, def Leppard, Lynyrd Skynyrd, Bryan Adams, Metallica, Boston, CCR, eagles, journey, Grateful Dead, I do like quite a few albums of Nickelback, and a few songs from a less known group diamondback.... Let think on these two the other one being blackwood.

[@chrisconway4218]

Music recommendation. Sam Donald. Dude kills it.

[@classiclinesautomotive]

First and foremost your the man and thank you . This will be blaring all day tomorrow great suggestion .

[@richardbates2367]

Southern Rock, classic rock hard rock heavy metal def metal some hip hop and rap and 60's through some 90's and newer country

[@BA-pz3lo]

for crows feet and hydraulic line wrenches i would go with tekton because its usa made

[@Anthony-wj6xb]

Love their sockets, like their stubby wrenches, not a big fan for combination wrenches. I understand u get what you pay for n I didn't spend much but was hoping for a little better quality.

[@BA-pz3lo]

i heard ur doing a free giveaway on this channel

[@classiclinesautomotive]

Maybe one day soon . I need to do one maybe beginning of April I can come up with something

[@erict6183]

Every tool breaks when using improperly. You can usually tell when it’s going to break.

[@classiclinesautomotive]

This is a very true statement .it's that little moment of is it gonna hold maybe just another tiny turn and profanity

[@CountryMileGarage]

I'm not even sure if I have any Sunex tools lol

[@classiclinesautomotive]

Oh no might have to do just say screw it and buy a socket lol

[@nonolabs]

Those arent just your thoughts. Putting over 100 pounds on a 3/8 ratchet is just ridiculous. Everything will break with enough force.

[@classiclinesautomotive]

Absolutely I'm not afraid to.push my tools I just don't want to abuse them type thing .

[@jasonbrock293]

A little birdie told me that Stanley tools actually owns Sunex tools

[@classiclinesautomotive]

I would believe that little birdie

[@Callelle6251]

Sunnex is good for sockets and bits. Everything else is basically junk. Their wrenches (especially those made in India) are hot garbage. Bad broaching, Open side spreads really easily, crude finish/chrome.

[@Cumminsproject01]

Yeh the wrenches are not impressive at all ive got stubbys because i rarely use stubby i just have them in case i need them and crows feet and they dont fit great at all especially when you compare to tekton wrenches now tekton are a little bit more money but still very cheap compared to any tool truck brand and the fit and finish is fantastic

[@zack9912000]

I dont like made in china hand tools

[@classiclinesautomotive]

Fair point I'm not a fan of vegetables so I don't mess with those nasty things

[@il94z12]

Supposedly they just moved majority of the manufacturing of their impact sockets from Taiwan to China. I’m expecting the quality of their tools to go down hill from here on. Hopefully I’m wrong.