SUP Inflating with dual inflator. (Ryobi and others)

Dual inflator, Ryobi, harbor freight, etc inflating of SUP boards and the necessary adapters.
(Edit: So, as some commenters noted, these little compressors are not designed for continuous duty, and most have a cycle of run for 10 minutes, then let it cool off fully. Mine has eventually slowed down, but still works. Since I now have 2 boards to inflate, I have now purchased a Outdoormaster Shark inflator (outdoormaster.com/products/20...) (look around the web for a discount, and you can find it on sale usually!) and it is a much faster process overall so far. Good luck!)
The adapters:
www.amazon.com/gp/product/B00... For the low pressure hose adapter.
www.amazon.com/gp/product/B07... for the Schraeder adapter.

[@brandonpico2159]

wicked, thank you for this!!!

[@miket4685]

Great informational video. I am contemplating purchasing that compressor. How long does it take to pump it to your desired pressure. Also, do you have turn off a couple of times to cool it down while inflating. Thanks in advance!

[@danzvidz28801]

Thanks. Another commenter noted this compressor has a duty cycle of about 10 minutes, after which you're supposed to let it cool before continuing use. That commenter recommended Dewalt's version instead, but I haven't tried it yet. Most times I would use the high volume side to get it minimally inflated, then it would take about a minute per psi to get the board firm with the high pressure side.

[@cameranmanner4701]

I think it's actually faster if you just run the high volume portion and hand pump the rest.

[@pcrome]

Hi, I just saw your video. What do you call the hose going to the high volume pump? You mentioned getting it from harbor freight… but I can’t seem to find it. Can you please give me a link? Or give me a name so I can look for it in amazon. Thanks.

[@SummitBidTech]

Just what I’m looking for. All the other SUP inflators are ridiculously expensive ($100+) and require the 12v adapter. I’m already a Ryobi tool collector so have batteries and plenty of other uses for an inflator like this. The adapter info makes this perfect. Thanks.

[@cameranmanner4701]

that's some what true about the cost. Only if you are invested in ryobi platform If not, the inflator plus battery and charger cost more then a SUP inflator.

[@EmmeryCheung]

FYI to anyone who has a 3d printer. There are adaptors you can print out for this instead of buying one.

[@angelahilbig1590]

I love this idea! I purchased the Ryobi inflator/deflator, but how did you get the adapter off the end of the high volume hose to be able to put on the other adapter?? I can't get mine off!

[@danzvidz28801]

Mine just unscrewed from the hose.

[@angelahilbig1590]

@@danzvidz28801 okay, thanks. I will have to figure something else out. I thought maybe you altered it somehow.

[@ZedZardoz9]

Mine as hot glued in, but came out by unscrewing.

[@charlesrg]

Please link to the adapter

[@danzvidz28801]

www.amazon.com/gp/product/B00CU1KBBU/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 For the low pressure hose adapter. www.amazon.com/gp/product/B071S7FZ75/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 for the Schraeder adapter.

[@mosh4him]

@@danzvidz28801 thank you so much. I did not have fun pumping mine up manually. This will be a life saver. 😂

[@danzvidz28801]

@@mosh4him I used this thing because I already owned it, but if I was going out to buy something for the purpose, I'd get a purpose made pump from Outdoor Master or similar. See my note in the video description.

[@brandonb.7650]

Can it deflate using the high psi end?

[@danzvidz28801]

You shouldn't need to. To deflate a halkey-roberts valve, press in on the stem, then turn slightly, and it will lock in the open position (so you don't have to hold it the whole time). You can use the low pressure hose to suck the last of the air out by switching the hose over to the exhaust port of the blower and it will help get that air out so you can roll up and stow. Don't store long term rolled up if you can help it, but in a cool dry place, inflated, but with minimal pressure.

[@zhrob1]

can that rig go as low as 3 psi for a kayak?

[@danzvidz28801]

I just tried 4 psi yesterday and it was able to cut off as it passed 4 psi.

[@niolss]

Can you send the amazon link to the adapter

[@danzvidz28801]

www.amazon.com/gp/product/B00CU1KBBU/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 For the low pressure hose adapter. www.amazon.com/gp/product/B071S7FZ75/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 for the Schraeder adapter.

[@ZedZardoz9]

You modified your shraeder tire connector to a quick connect?

[@danzvidz28801]

www.amazon.com/gp/product/B071S7FZ75/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 This!

[@juhaMMMMMM]

how quickly does this unit inflate your sup to 15-18psi?

[@danzvidz28801]

It's not as fast as a purpose made SUP Inflator. I'd say about 5 minutes with the low pressure/high volume hose, then about 10-15 with the shraeder adapter on the high pressure hose. On the upside you won't be too tired to paddle, like if you pumped it up by hand.

[@juhaMMMMMM]

@@danzvidz28801 Thanks for the reply!

[@russelllee4006]

Thanks for the great vid. I have exact inflator to pump my isup. Using high volume side which takes almost no time at all, then switch to high pressure. Initially it takes about 10 to 15min. But after a few more sessions, it took longer and longer to pump. Realised that this pump has a duty cycle of 10min, which when not adhered to, the pump performance deteriorates rapidly. Will get the DeWalt when this Ryobi dies.