Super Realistic RC4WD TF2 Engine Bay Kit

Your RC4WD TF2 is about to get a seriously cool upgrade! The new Engine Bay kit is designed to fit in the TF2 variants with an opening hood, and with a little extra effort, can be properly detailed to look super realistic!
Pick one up here: store.rc4wd.com/yota-22re-eng...
Our merch is super cool: teespring.com/stores/scale-bu...
#toyota22re
#rc4wd
#scalebuildersguild
Buy my gear here:
Sony a6500 amzn.to/2u9Rsfs
16mm Sigma amzn.to/2UFv5dD
55-210mm Sony amzn.to/2TH8DUR
Rhode Video Mic: amzn.to/2W56DlX
Zhiyun Crane amzn.to/2TIaxo9
GoPro Hero 6 Black amzn.to/2Y3rGHx
This Dewalt screwdriver is my goto nowadays.
amzn.to/2udpvn4
Patches here: scalebuildersguild.com/forum/...
► Follow us on Instagram! / scalebuildersguild
► Follow us on Facebook! / scalebuildersguild
► Join our forum!
www.scalebuildersguild.com/forum
► Merch available here:
teespring.com/stores/scale-bu...
I shoot all my videos on the Sony a6500 in 4K, with Sigma 16mm, 19mm & 30mm and 55-210mm f1.4 lenses and the Zhiyun Crane V2.

[@gravity1]

I always love your attention to detail on your scale builds. At my age I'd be lucky to even see those tiny bits much less hit them with a paint brush. I think that motor may have some over heating issues without that radiator hose.

[@adamb7426]

Looks good 👍The large spark gap/valve adjustment sticker goes on the underside of the hood

[@RCJesus420]

Lots of nice trucks have dirty engine bays because people actually drive them. lol It turned out great!

[@713Ace529]

Definitely adding wires will give that real look. Nice. 🇨🇱👍

[@discoveryrc]

Csn almost hear it idling. Great job

[@bakko9302]

even got a slight knocking to her lol. Now just remains to mount that low oil lamp in the dash ; )

[@BlindGuyRc]

Oh man. That is awesome. I wonder if that would fit in a c2x.. My First vehicle as a teen was 1990 Toyota pick up 4x4 with a 22re. Great little motors. You always do/get such cool stuff haha. Great work man. 👍👍😎⭐⭐⭐⭐⭐

[@scalebuildersguild]

Not sure if it will fit the Mojave body actually. Might be a slightly different mount. I know it fits the 4Runner and the Xtracab!

[@BlindGuyRc]

@@scalebuildersguild males sence really

[@jerryvolpini7987]

Like the weathering, really sets it off! Anybody can do a new engine bay but this adds another level of realism. Awesome work 👍

[@-Gerald-]

I can tell you have been really paying attention to Josh's weathering techniques. Glad to see that it's paying off.

[@ruftime]

Beautiful weathering Matt! Installed, I was imagining that you just had your truck repainted at Maaco/One-day Paint😂.........but then realized there would be tell-tale orange overspray😎

[@gerrysoldguyreview]

Thanks matt!! My 84 4runner needs this in its life!😆😆

[@thegoat78]

Looks awesome!

[@robertmatheny3375]

GREAT WORK Matt

[@doubleheadedeagle6769]

Well done mate. Looks great.

[@PopalongRC]

Lovely scale looks!! Well done!!

[@indybama80]

Looks really good matt

[@Overland_RC]

Awesome paint work on that! It looks so real!

[@COLDWARCLASSICS]

Looks good man!

[@lypheEddie]

Looks great bud! Like the format of the video and the topic!

[@markvasseur961]

Yes, I Love it!

[@North49RC]

Looks sharp yet subtle, nice detail. Keep it shiny side up buddy

[@joss67uk]

Thats a great little scale upgrade, looks awesome.

[@Rcworldshop]

I would weather a little less because all my bodies are shiny but that is such a great product from RC4WD.

[@guadalupecovarrubias3487]

That is super cool👍🏽👍🏽

[@chujmlrc]

Really good Job 😉👍🏻

[@mikebird8290]

VERY NICE

[@gugunsukmatea]

Present bro

[@IgnisMan]

Well Done 👌😎

[@theirishaxe9405]

The weathering on the left side decals is really good bro👍 ever thought about adding the radiator hoses? Would look cool

[@scalebuildersguild]

That's the plan, once my pin vise arrives!

[@mikej8832]

@@scalebuildersguild pin vise? Great something else I'll need to Google.... You're always hiding secrets after all these years. 😋😋😋😋😋 No audio on Tuesday 😂😂😂😂

[@rvlyssup]

I find Vallejo paints are the best when it comes to weathering. Use them exclusively on my RC armor and military vehicles.

[@RCMANTOG]

Cool very buddy 😍

[@kinslersrccustoms6945]

Like that you had video for it as you aged it up . Love your videos.

[@mbarton98]

Looks great, love the oil leaks. Need some scale insects embedded into the radiator fins and some battery terminal corrosion.

[@darkhorsegarage9623]

The stickers on the fender are ment to go on the underside of the hood.

[@highwaytohell7099]

The big sticker on underside of the hood, top right hand side? The 2 others are vin and model codes I.e paint, engine, interior spec, etc which go in the bay, 1 usually on firewall and one on fender or rad support area.

[@KearSki]

The big sticker with the blue text should be the emissions info which is usually on the hood if it's original. And the silver one might be the build plate with the vin and stuff, which is usually above the exhaust on the firewall

[@GrimJerr]

Really Nice ! I do think That naked Water neck leaves room for concern, your going to lock up the engine without coolant ; - )

[@scalecrawlnl]

Cool 👍

[@AllThingsOffroad69]

I can almost hear the 50k sub giveaway! 🤘🏻🇺🇸

[@crawlingri]

Awesome! Just started mine! Let me know what you think!

[@SwampersRC]

Actually if you see a truck that old which looks that good, you'll probably find an oily dusty dirty engine bay!

[@wesmadebuilds681]

It sounded like a radio disk jockey when you started the video. 😄

[@scalebuildersguild]

I'm still hoping that I'll get the call to be the new voice of RC Cola.

[@eddytoy9496]

Another masterpiece Matt, always look forward to your vids and live streams. I was wondering if you could shed some light on something I've been racking my brain on for days. Do you have any idea what the two little black light buckets are for that come in the UMG10 kit? I've detailed everything and saw these left on a tree and there isn't any lense for them but they have three holes on the back two are which a pass through hole from the front. My only guess would be to attach to the back of the gauges behind the steering wheel for some illumination. I don't have a clue, thanks for the killer comedic content brother! Can't wait til the next one. - take it easy man........- Eddy

[@scalebuildersguild]

Hi Eddy, not sure actually. Axial routinely adds extra pieces that might not have a place, so it’s up to you to be creative! Good luck!

[@CoachD386]

🔥💯💪🏾

[@wesmadebuilds681]

Have you ever tried Fullers Earth Powder? I have heard about it from Cosplayers but never tried it myself. Supposed to give that real dirty look.

[@scalebuildersguild]

I haven't, but I do have a ton of pigments which can offer a similar effect!

[@2-n-tintz928]

Did you color code the fuses?

[@peteranthonyguno2515]

Will it fit the hilux body?

[@TCnML]

Do you have a good recipe for the washes you use?

[@scalebuildersguild]

I don't, it's either a pre-mix or I make them from feel. I like them to not have a lot of coverage. The thinner the better.

[@gfyracing7632]

For painting tips check out Trapped Under Plastic on KZbin. That will have links to some award winning painters that use the same paints as you.

[@SldgeHammr]

Are there dimensions available? Curious if this would work for other trucks like the Xtracab and Marlin, albeit probably nice a nice looking

[@scalebuildersguild]

Direct fit for the Xtracab, I show it in that.

[@SldgeHammr]

@@scalebuildersguild I was too excited, I commented before the video was done! Hooray for viewer engagement

[@1Almightydeez]

Will this work with the older tf2 mojave with the servo mounted directly left of the motor ??

[@scalebuildersguild]

It fits any standard TF2 chassis. It's the body that's more specific. I can't comment on the Mojave, as I don't have one here. Check the link in description, it might offer more info.

[@1Almightydeez]

@@scalebuildersguild thanks soo much for the reply

[@COLDWARCLASSICS]

First fools!

[@shadowing48]

You forgot the intake plenums and the headers 🤷

[@powcar91]

The thermostat housing doesn't have a radiator hose.

[@scalebuildersguild]

And the distributor doesn't have wires either. It's not entirely done yet as I mention.

[@powcar91]

@@scalebuildersguild Still a good model

[@highwaytohell7099]

Reckon the distributor is running elec ignition or points? Lol

[@powcar91]

@@highwaytohell7099 I think most cars didn't have points after the 60s

[@justinv584]

Love the wet affect 💦