Supercharged Dodge Dakota R/T Gets SMALLER PULLEY

The Supercharged Dodge Dakota R/T Pickup truck project gets a smaller pulley in this video to produce MORE BOOST from the p1sc procharger supercharger. We are trying to get as much horsepower as we can out of this 5.9L v8 Magnum mopar engine and forced induction is how we are getting it done. We hit over 10psi today on this new setup but we aren't done yet as we continue this build on the project truck to get the Dakota to the race track where we try to compete with modern muscle and the high hp they produce!
*Checkout other cool products Boosted Motorsports has tested and recommends HERE* 👇
www.amazon.com/shop/boostedmo...
👇 *SEND STUFF TO THE BOOSTEDMOTORSPORTS P.O. BOX* 👇
PO BOX 1873
San Jacinto, CA 92581
or
315 E Esplanade Ave
#1873
San Jacinto, CA 92583
For transmission parts check out WIT
www.wittrans.com/
Disclaimer:
Due to factors beyond the control of BoostedMotorsports, I cannot guarantee against improper use or unauthorized modifications of this information. BoostedMotorsports assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BoostedMotorsports recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BoostedMotorsports, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BoostedMotorsports.
As an Amazon Associate I earn from qualifying purchases. Products in the provided Amazon links are my recommendations based on honest use and experience with them.
#DIY #Garage #Wrench #ManCave #Honda #Dodge #SRT #Performance #Carproject #Truckproject #Salvage

[@dakotart9636]

I got mine to run 13.1@105 with 9 psi back in the day. Love the series!! I miss my R/T!!

[@02mp9696]

Good to see it ripping on the road. Ok, now its time for a cam, heads, rockers, springs, and a converter👍👍 lol.

[@pyozoa]

Boost baby!! Thanks for the awesome update! Its really getting there now, I can;t wait for it to hit the track at full speed! Good going! Aloha and Mahalos!!

[@r-shot8431]

This is absolutely moving in the right direction. Love this brother- keep up the great videos

[@Jerry-cc7rd]

👍👍 Can't wait to see it at the track

[@92rigger]

Oh wow, sounds awesome. Love it

[@ronaldmoparornocar9590]

Nice like to see it making boost now...to bad you're getting rid of the a/c still a nice cruiser also don't need swamp ass waiting in line to run or in traffic...then end up with a truck full of tree air fresheners. Cause it smells like 8 cans of shark shit.....oh and by the way on the radio wiring harness there is a green with a red runner on it on the truck side harness if you put the power antenna or remote on blue wire from head unit it will turn factory amp on...I bought the harness kit you did and couldn't find the diagram you had so did some wire chasing and figured it out just an FYI got mine up and going with the Alpine head unit with blue tooth....Bing bang boom shaaka laakka!...👌👍✌️

[@mikeysais1980]

I stopped following you when you finished the HellRam and went to the Honda (I really don't remember the car) glad your channel popped up to see you working on this truck.

[@DonovanxPetersen]

Love it keep plugging along, however keep those VC's for rocker clearance they are on back order IIRC everywhere. Just get AN fittings welded on. You are going to an all AN style anyways eventually I'm about to do the same thing.

[@ssh7778]

Yes! More boost

[@kevinmonseler3592]

I don't know if anyone has mentioned your under hood being dirty....... 😂 clean that will ya. LOL great video, good to see the Dakota finally growing up, keep up the great work John

[@bdogjr7779]

Awesome BG《☆》Reminds me of this one time at band clamp🤓👍🏾I have a new set of MP valve covers that I'm planning on using one day but I can see how poorly the grommet fits & how it would be prone to leaking especially if boosted :*: Greetings from Florida fellas🤓🗣☯️🕛☮

[@TheFlR3StOrM]

You might be getting some blowby. Is the PCV valve hose tied into the blower line? If you have a PCV valve, might want to install a catch can since the motor does have some age on it. Can't go wrong with one installed. Another great video and a new day with boost.

[@carlossoria3695]

Carlos Soria checking in keepgunnin

[@aaronmillar123]

Unlimited 200 harbor freight awesome welder meg TIG stick aluminum performs well on all three types of welding

[@sinister6.450]

So fuckin awesome man! Lol. Ac is the first thing I took off mine. More space. Less parasitic drag.

[@johnhenrywiegand8499]

when are you going to take the dakota and srt 10 to the track? love the builds, keep it up

[@shockracer]

Depending on what type of mig you have you could get a spool gun for it. How's the power compared to the 1500?

[@whatsBF3]

switch to t-bolt clamps when you do the new intercooler...

[@BoostedMotorsports]

Yup we have those sitting here 💪

[@danielaraujo44]

I loved how that spool sounded on the first pool but damn it sounds horrible on idle well at least on camera. Sounds like the belt is bad or something jeje.

[@derekprice5510]

Cool videos, next time you go out for run show the instrument cluster so we can see the tach and speedo.

[@2tweeds]

You should put some race stripes on the Dakota so it matches the other Mopars. Maybe black or carbon fiber? Keep up with the good content 👍

[@ejdiaz347]

What supercharged kit are you running on your 5.9l? Lmk please.. What to supercharged my Dodge ram lifted 5.9l..👌🤘💯

[@davidledford6482]

maybe put something for extra grip like pvc black or ultra blue etc for grip under the clamps,so it wont be so slick an keep coming off...

[@mattglover4163]

Clean the under half of that hood already 😂😂

[@BoostedMotorsports]

lol it is clean! You're seeing the factory black primer theres no blue paint there I'll settle this next video 🤣

[@onefastlife5017]

Underdrive crank pulley might help

[@georgeesparza839]

I have a cleaned up pair of black valve covers from my 2001 dodge ram 5.2L available. I've been looking for the valve covers you currently installed.

[@georgeesparza839]

Email me [e-mail]

[@davidledford6482]

are cat converters long gone an do you have headers etc..??again,make sure overdrive is off until you want it on, seems to sound good,but takes a long time to wind out...from here at my computer lol..am just tryin to help..

[@dirtyck]

Would love to see you get this on a Dino.... Want to see the horsepower numbers before you do any more work after this.

[@georgeesparza839]

Where did you pickup you valve covers?

[@BENDOVER-xr8pc]

🔥🔥🔥🔥🥵

[@davidledford6482]

are your tires tall, it doesnt sound like the usual 3.92 gear..not very tight,but i dont know..

[@jwilkins1121]

If you end up getting stock valve covers I will buy your mopar covers

[@davidledford6482]

dont guess at things, make for sure you know what your doing etc....

[@kenleycarlton7562]

Gonna do an A/C bypass pulley? Or just leave the compressor on

[@dougkreutz7701]

Nice truck to bad about using a pro charger. Kenne Bell use to make a kit to bad they quit.

[@superpater1]

Why do I feel like your gonna take the ac off then 5 minutes later complain that it's too hot in that cab lol.

[@brandonbrown3899]

I've got to Dakota's in their both evil.unless they are on point they are hell on your nerves.

[@GTOFan350]

Put a TKO 6 speed trans in it and a set of aluminum heads. Drop the compression and do 20-25psi! Maybe some spray of you're feeling froggy.

[@georgeesparza839]

Do you have more info on the trans your talking about? I need to upgrade my automatic trans in my 2001 ram 1500 5.2L

[@davidledford6482]

are you sure grommets etc are seated all t he way,double an triple check things...

[@QueensGTO_Viper]

10 foot long belt haha

[@davidledford6482]

what gas are you running,man..get the advance timing chip etc,an run 93,again i say...it makes a decent difference,mine winds really fast..

[@allanb3222]

He is using HP tuner's, so no need for chips lol.

[@davidledford6482]

how many miles does this truck show is on it,most are pretty high mileage when bought used ,let us know,an thanx...mine has 94,000 since new in 2002,we got it in 06 with about 43,000 miles..never tuned,no spark plugs, got new k an n filter an run premium allways an made a big difference, timing advanced with hypertech chip maybe the guy said..............

[@BoostedMotorsports]

About 170k

[@BigMan7o0]

are the internals of that motor stock? when I was researching boost options and safety limits for my 5.9 magnum everyone was acting as if these motors are fragile hand grenades above 5psi of boost when the insides are left stock...

[@02mp9696]

I've had 7 of that era of rams, with the 318/360s. And beat the shit out of them. And they were beat before me lol. They are just like the older 350s lol. Just those 46re I've always had issues with Converters and burnt up a few trans. Im sure 5psi will be fine 👍

[@BigMan7o0]

@@02mp9696 Great to know, thanks for the info.

[@billypoot3504]

I have stock valve covers for you...

[@williambrandon6725]

great channel, go to eastwood.com for your welder, you can get a whole lot of welder for not a lot of money. keep those great vids coming.

[@davidledford6482]

isnt the best right belt a ,,...green one..remember...it seems

[@josemedina4814]

I have stock valve covers I’ll trade u for ur valve cover

[@lsxforlife]

Clean that black stuff on the hood

[@BoostedMotorsports]

lol it is clean! You're seeing the factory black primer theres no blue paint there I'll settle this next video 🤣

[@lsxforlife]

Oh ok I see,

[@davidledford6482]

your gear from here doesnt seem like a standard 3.92..but..confusing,thats from here, maybe shift it at 4500 or so,thats where all the power an torque etc is in at on this...dam rain go away,am sleepy,an bored..

[@brandondimmitt8467]

U need to start leaving ur logo in the bottom right of all ur videos!

[@davidledford6482]

no nitrous, thats just not true performance,an dangerous too...

[@Potatoesandlead]

sell the s2k. you arent doing anything with it anyway.