Supercharged Dodge Dakota R/T | Installing Intercooler Piping

[@jwilkins1121]

Do you have a link for those push to connect fittings and the tubing

[@BoostedMotorsports]

Sure do! Here it is down below 💪 90* Fittings - amzn.to/2ueimWZ Straight Fittings - amzn.to/2R7RUae 1/4" Tubing - amzn.to/368x139

[@jwilkins1121]

Thank you

[@Civicky]

Put the battery in the back somewhere. I relocated my battery in my last car to the boot and it was awesome. In the process of doing it atm.. hope it’s as easy as I Remember lol

[@sinister6.450]

Relocate battery to truck bed right behind driver side cab. Pretty easy one to get more room

[@sharktale207]

Rocha checking in

[@pyozoa]

Thank you sir! Great update again and the step by step progress on how far your Dakota has come from the time you started is pretty awesome! A clean garage is a clean mind and yup, it does help the thought process without extra clutter all over the place! Thanks for sharing! Aloha and Mahalos!!

[@DStabs720]

When you're trimming those silicone pieces put a hose clamp on and it will give you a straight edge. I learned that from another youtuber!

[@chrisdejong2481]

Good stuff good stuff glad you got her all pipped out, almost there 👌

[@braymcintosh2833]

This truck is soooo sick

[@BoostedMotorsports]

Thanks! 🤟

[@blackbeardlivesagain]

Wow. Snake’n it. Good job getting around everything. Your right about the rubber expansion/contraction. It will rob you of power. Excellent video on your progress. Looking forward to what’s next.

[@joshmitchell1551]

You can also use wire krempers on piping to make a bead

[@BatJordo]

Relocate it back to behind the passenger wheel well run a. Emergency stop button on the bed rail. Better traction. No AC. This isn’t some street truck. The less bends the better the flow.

[@Jerry-cc7rd]

It would be pretty sick to get an aluminum fuel cell and put it and the battery where the spare was... under the bed... with like a recessed opening for the fuel door so the entire bed is still usable... Would definitely help with traction and launching, and you'd get some more experience fabricating and welding... I plan to do this eventually once I actually get some POWAHHH. Might make more sense for you to just mount it in the bed and be done with it considering your plans for the truck. Keep it up though man, great work and content! 👍

[@BigMan7o0]

I love these videos, because at some point I will be using these as a how to for my dakota rt (plus it's just great content). keep em coming!

[@mr.karlson633]

Nice. Have you gotten to full time KZbinr now or still working the daily? You upload alot more now which is awesome 👍 Also how did you measuring to find out belt size

[@BoostedMotorsports]

Thats the goal but its definitely not sustainable yet. I'd like to get there but still juggling multiple work duties and working double time to make it all happen. I had a fellow Dakota owner let me know what belt size he used so we'll see how it works out on the next video!

[@joshuahollinger1576]

love the videos bro! little hesitant to lower my truck myself after I saw your video.. holy smokes lol

[@joshuahollinger1576]

@violentjett did you watch his lowering video? the rear looked like it was a bit of a challenge

[@BoostedMotorsports]

Yeah the rear sucks to lower on these trucks especially if you have seized hardware. Also removing those rear hangars and the rivets in the frame were no fun lol

[@joshuahollinger1576]

@@BoostedMotorsports 3 cans of PB blaster heard lol

[@NajarOffroad]

Do it! It looks way better!

[@sunshinesallday]

Awesome content!

[@brandondimmitt8467]

Man get ya a cheap bead roller from harbour freight forget welding a bead ud blow through that stuff!

[@NajarOffroad]

No don’t blame me😂 it’s the restriction from the inter cooler 🤷‍♀️

[@92rigger]

Like someone else's said, you should try to relocate your battery. Maybe they're space behind the seat?

[@bdogjr7779]

Awesome BG《☆》Good to see so much interest in👍🏾Dakotas :*: Greetings from Florida🤓🗣☯️🕛☮

[@stevewalker412]

Looks like theres room for a ac condenser in front too for others

[@georqedubyakush6066]

Is it possible to flip the intercooler? Looks like there could be better clearance with the inlet/outlet on the bottom

[@peterboissiere9684]

U can use a bead roller

[@peterboissiere9684]

Move the battery

[@killaz123456789100]

You cant flip the throttlebody hat around the other way facing the charger?

[@nickd576]

John, what's the height from the floor to the bottom of your rafters?

[@kennickerson2623]

Build a box in the bed of the truck with a battery shut off inside the cab

[@sharktale207]

Johnathon be Effin up 🤦🏽‍♂️

[@BoostedMotorsports]

Always 🤣

[@NajarOffroad]

Not even😂 it’s chance out of like 20 band clamps 2 came off 🤦‍♀️

[@sharktale207]

2 to many 😂

[@saleen281281]

JONATHAN IS A BUTCHER, HOLY SHIT

[@onefastlife5017]

Relocate the pcm inside the fender , it will give you more room and look cleaner , add a meth kit and name it Breaking Bad lol , or a co2 in between the rad and intercooler , that way in the hot days you can cook down the rad and the intercooler

[@soflsteel777]

Jesus they dont give ya a lotta wiggle room to work with under the hood.

[@BoostedMotorsports]

Its a custom intercooler setup so kind of a issue we made on our own but its definitely crammed in there lol

[@soflsteel777]

You said you may not keep the supercharger in there for long... what other changes were you contemplating?

[@davidschmitt3491]

Why don't you put the battery in the bed of the truck or put it under the bed

[@inupiaqpride]

Just move the battery.

[@davidrosales6893]

I've been following since the channel was boosteds2000 but the content you had of the car was kind of sketchy lol

[@BoostedMotorsports]

Thanks brother! Yeah its been a learning experience with this video creator stuff for sure lol