Supercharged Episode 2 Short Shifter Install Purchased from eBay for approximately $60 Installation takes about 30-40 minutes. Enjoy! Instagram: @hypexstandard Track: Skylike - Limitless Link: • Skylike - Limitless
Пікірлер: 46
@shadowlexus71546 жыл бұрын
thanks for making this video man, made installing my short shifter a peice of cake!
@Shackz006 жыл бұрын
Your most welcome mate!
@jjbc5059Ай бұрын
Hi mate! Thanks 4 the tutorial! On my kit, it comes like a metal bushing with the short shifter and screws. Do I need to replace it? My engine is like 62758 miles (about 101,000 km) and the previous owner was an old married couple, and all fixes and maintance was made on the Lexus workshop (proved). Pls let me know if it is necessary ;)
@malikcantdress75082 жыл бұрын
why’d you remove the big spacer block thing ?
@gladwinpereira66062 жыл бұрын
Is it worth installing a supercharger? What are the power gains you get?
@007-Bond3 жыл бұрын
A little late to the party, but isn't everyone. Nice video, and simple explanation. Do you find that your transmission is clunky when shifting? Especially from 1st to 3rd gear? I heard that's a common problem on the IS200's. What's your take?
@Shackz003 жыл бұрын
Not really maybe you need to check your syncros.
@ReinerFerenc6 жыл бұрын
Nice! Where did you buy those pedal covers? I want to replace mine that's still the stock.
@Shackz006 жыл бұрын
Hi mate, the Pedals are standard Sport pedals that came with the car. I think you can buy some covers off eBay and fit them with no hassle.
@jacobfairley446 Жыл бұрын
I have a short throw in my is200 and it looks to be the same but mine rattles like crazy. Do you know how to fix it?
@seamusmurphy1756 жыл бұрын
Hey mate nice video, just wondering.. do you get a rattle with the new shifter?
@Shackz006 жыл бұрын
Hey mate, Thanks! Nah no rattle with the new shifter its nice and tight.
@snubzofficial6 жыл бұрын
Hey bro good video, did you notice your hand gets cold when shifting after changing to shifter? I have the same shifter in mine. Did you buy the shifter from Ben?
@Shackz006 жыл бұрын
Hey mate, nah didn't notice my hand getting any colder after changing it =D. I saw that Ben was selling these only after I posted a video. I didn't get it off him and didn't know he was selling at the time. Although I'm glad he is =D
@GAMEINGSMG Жыл бұрын
@@Shackz00 whos sells them?
@Shackz00 Жыл бұрын
Got this off ebay quite awhile ago now.
@TheMuzikall5 жыл бұрын
Need to get one of this short shifter😭
@Shackz005 жыл бұрын
very easy install =D
@TheMuzikall5 жыл бұрын
@@Shackz00 ..looks that way ..I need one for my IS200 Sport...a true sports saloon...can't think of any 155bhp ride with LSD and Doubles wishbones 😆
@Shackz005 жыл бұрын
TheMuzikall it indeed makes it fun!
@Memo-fy4ix5 жыл бұрын
Hello brother you Know how to adjust the height I have the same short shifter, but it does not have alien bolts on the lever part, I say to adjust the height, it has a kind of metal, that Is taken out to adjust the height?
@Shackz005 жыл бұрын
Hey mate, sorry for the late reply, You probably figured it out by now but here is my 2 cents. With the short shifter that I purchased it mine did not come with any height adjustment. That being said the short shifter in question does not come with height adjustment. the shortness is only with the throws when shifting over stock.
@javims995 ай бұрын
Hello i have a question, witch type of grease did u use?
@Shackz005 ай бұрын
You can use lithium grease but head to your auto shop. They should have shifter grease for shifter assembly.
@XeoN-PL6 жыл бұрын
I want to install Epman short shifter in my IS200, but I'm confused what I have to do with this screws on the sides (where you used allen key). Can you please tell me what is it for? It's some kind of shift lenght limitator?
@Shackz006 жыл бұрын
+Komandos1205 hey mate the screws on the side i am tightening up are to hold the shifter spacer in position with the shifter. It would also be to adjust the shifter height. However some short shift kits have more adjustability in the top section.
@XeoN-PL6 жыл бұрын
Shackz OK, but how do I know that it's in a good position when it'll be installed? I thought it's possible to check it only when it's not mounted. Do I need to adjust it and feel the difference for my own or there is some tips how much tight it up?
@Shackz006 жыл бұрын
+Komandos1205 the height adjustment doesnt do much unless the kit is ment to be adjusted vertically. Before the installstion whether your car is left or right jand drive the shifter will either be pointjng to the left or the right depending on the driver location. You can adjust the little screws to off set the angle of the shifter to poin to the direction of the steering wheel. However dont try and modify the locarion of the angle when the shifter is in the gear box. You might accidently put the box into gear and thay would br a headache to undo.
@XeoN-PL6 жыл бұрын
Shackz OK. Now i know something. But still - is it necessary to adjust it or it's optional? I don't want to break anything... :D
@Shackz006 жыл бұрын
+Komandos1205 haha no worries. It shoudlnt be really to need adjusting. Although you need to take the gearbox spacer out so you can lubricate the Oring. You wont break anything ☺
@prof3ssornutzz3363 жыл бұрын
Where did you get the other screws
@Shackz003 жыл бұрын
All hardware was reused from the stock shifter.
@mtrujillo293 жыл бұрын
What transmission is in your tezza?
@Shackz003 жыл бұрын
6 speed. Stock from the lexus is200
@jeffersonbagain83585 жыл бұрын
link where you buy it
@Shackz005 жыл бұрын
Hey mate link has expired. But this was a short shifter from eBay.
@deanwilson20202 жыл бұрын
Did you remove the fat spacer all together???
@deanwilson20202 жыл бұрын
I’m having trouble getting the new short shifter in
@Shackz002 жыл бұрын
That big fat square spaced was removed.
@VishalFernando2 жыл бұрын
@@deanwilson2020 Hey mate, Im having trouble installing it aswell. Did you manage to fix it? I thing the plastic piece on the bottom doesn't fit into the gearbox properly.
@deanwilson20202 жыл бұрын
@@VishalFernando I had to use a hammer and ended up bashing the shifter in was a lot of bashing but done the trick and worked mint!!
@VishalFernando2 жыл бұрын
@@deanwilson2020 did you use the fat spacer? You have to use it right? Otherwise the shifter won't sit properly
@PatrykV66 жыл бұрын
what costs? in poland it's about 40eur
@Shackz006 жыл бұрын
Hi mate It cost me around $60 Australian Dollars. The screws in the kit need to be longer though.