Ford 3000 power steering part 4.

[@jballard-kk3xh]

Really appreciate all your advise and the little things we didn’t think of! Very professional and visually clear. Thank you.

[@jimmarshall9937]

I have a 1974 3000, I found this video to be very helpful when working on the power steering. Good job, well done.

[@gwenlazarus1471]

Great video. I am a new tractor owner, 1984 Ford 2810. Your videos are a great help.

[@advancednutritioninc908]

I am just about to buy a Ford 3000 ... I appreciate your videos! Thank You!

[@christopherstrobach637]

I'm fixin to have to replace both cylinders on my Ford 3910 so this was really helpful. I feel a lot more comfortable now, especially cause I'm just putting on new cylinders and don't have to rebuild. Thanks for taking the time and trouble.

[@gscatty]

3:31 :) bout to do this on a 231 - looks identical. Thanks for the series!!

[@gregbacon819]

I just disassembled one of my steering cylinders. The hardest part was removing the white nylon seal spacer. It was stuck tight and had to pry it out slowly with picks and screwdrivers. It finally came out in two pieces.

[@marcinsujkowski7734]

Sorry forgot to add.. i really like the videos. very detailed and well done :)

[@griffinwarden5034]

Great job on Video. I did the same rebuild on my 3400 and this was very helpful.

[@hippydippy]

Thanks so much! I have a 1975 Ford 4000 that needs the same work. This has helped a ton.

[@walterbanta4775]

Thank you for taking the time and for your patience. I have a 4000 series, but it should be similar. Unfortunately, I will likely have to pull and reseal the steering column too.

[@TrakehnerMonschau]

Thank you for your explanation. It's really helpful for me.

[@bobwhite1734]

Could you show how you connected each individual lines to each cylinder?

[@mikeprice1816]

Good instructions man I got to put them seals in my 2000

[@crowridge1]

Do you have a video where you re sealed the grinds of the power steering rods? And the kit parts order # ?

[@mickinohio5432]

Got a 68 3000 that comes to a complete stop when turning , I have to wait a half minute or so and then it releases . Going to try this out and see what happens !! Thanks for the video , appreciate it !

[@paulweaver4819]

Nice vedio. I have a problem with mine. It brike my cylinder rods a couple of times. What is the proper adjustment on on the linkage. As i turn the wheel the cylinder seems to push but swirles around. What could that be. Any suggestions appreciated. Really fustrated. Thanks

[@seanflaherty4259]

Nice job I have the same tractor it's a 1970 I am just putting it back together.

[@MuhammedhilmigulluBlogspot]

we are manifacturing power steering for all kind of old tractors. please contact me "[e-mail]" "www.garbey.com"

[@longear3255]

great job on the video. Thanks

[@denzilsmith343]

Thank you it helped me

[@richardwall4580]

Awesome videos superhogult. My father-in-law has a 4100 with this same system. He has been bending cylinder rods for 2 yrs. Do you have any info on how to adjust the pump output pressure? And do you have a psi spec for this pumps output?

[@timothyjohn4773]

Hey, Thanks so much for the video it help me from making a mistake, by the way what type or power steering oil did you use.

[@scottmurrell3872]

Common sense explanation of cylinder seal replacement. Thanks.

[@russellhancock9765]

It might Help My Dad and I soon. We Have a 1968 3000 Diesel almost like Yours and it does turn pretty good, but I think something is slightly out of line because it will only turn in one direction and it is like the Tractor nearly tried to run over the front wheel. My Brother-N-Law put a front end loader on it for a while and I don't think He put it back together exactly right.

[@aransasbay]

I have a 3000 with intermittent leaks at the farm 360 mi from my shop. This gives me an idea what tools to bring........I've been using type F transmission fluid. What you use?

[@MuhammedhilmigulluBlogspot]

we are manifacturing power steering for all kind of old tractors. please contact me "[e-mail]" "www.garbey.com"

[@alicefroehlich9733]

Way kind of power steering fluid do you use? Thanks

[@ronvermeeren1347]

Great explanation!!! Tnx

[@leroymcentire1230]

I have owned a Ford 3400 for twenty years, and have never changed the filter and fluid in the stirring system on my own. This is excellent. My owner's manual did not dictate a specific fluid. Just use standard stirring fluid? I bought a generic fluid from my Mahindra dealer. Is that okay?BTW to you have a video on the servicing of the transmission fluid and the hydrolic system?THANK YOU FOR YOUR VIDEO>

[@superhogult]

Leroy,I will be doing another video soon of a full service including the engine, fuel system, transmission, and hydraulic system.

[@jeffsmith6270]

Thanks very helpful

[@josegaucin6007]

Are the two lines power steering lines the same I’m looking to order new ones.

[@superhogult]

I do not believe so. I can check and let you know

[@marcinsujkowski7734]

i just inherited a Ford 2000. One of the steering cylinders leaks really bad. I ordered a seal kit and will try to replace them like you did. One question i had was regarding the "bleeding" you did in part 4. i'm a little fuzzy about what that means. Is all that is involved is having the reservoir open and turning the wheels really slow?

[@superhogult]

Marcin Sujkowski yes you will be moving the steering from stop to stop slowly to remove all the air from the system just as you would do a car. Just make sure it’s up on a jack or block to make it easier on you and your tractor. You will make a slight 5 second pause at each stop. Cycle through about 6 times and recked the fluid. Try not to let it get low as it will bring air back into the system.

[@collinwheeler7999]

Do these type of systems have a pressure relief on the column or the pump? Mine gets hot and hard to steer when the front end has a load on it. I just changed the fluid and did not help. Any info Would be greatly appreciated!

[@kenrauch4701]

I have a 3400 Ford that the steering turns left but does not want to come back to center , turns right fine and back to center fine , Any suggestion as to the problem ?

[@superhogult]

Ken Rauch I would lift the front of the tractor up as to get a better idea of what’s causing the binding. If you don’t see any obvious issues then remove the power steering cylinder to you can check the front axle for sticking I’m not sure what it’s called on a farm tractor but on a road tractor they are called the king pins. If no issues are found when the tires are turned left to right then I would suspect the power steering. If that’s the case add one cylinder back and recheck. If you remove the front of both cylinders and let them hang and watch them move while you turn the wheel and see if they match in movement

[@mauromagnatta2932]

Ciao, possiedo un trattore identico al tuo, sto revisionando tutto l impianto di sterzo, ma le guarnizioni dei cilindri idraulici non riesco a trovarle qui.... Potresti aiutarmi se hai qualche codice dei ricambi oppure i vecchi da poter darmi delle misure? Ti ringrazio tanto

[@leroymcentire1230]

Spelling is not my strong suit STEERING System..

[@Narayankapurcandbilwalbilwal]

muje,bananahay.maharastr,me