How to fix the common neutral light fault on the Suzuki 1250 Bandit , a 10 minute job with 2 tools !. Thanks for watching ,hit SUBSCRIBE for all things guitars ,music and Motorbikes . THROTTLES AND FRETS.
Пікірлер: 63
@jotabege Жыл бұрын
I have a Suzuki Bandit 1250 and I had a problem with its neutral light. Thanks to you, I dont have said problem anymore. THANK YOU!
@JonnyLeeguitarist Жыл бұрын
That’s great news!
@SteveJones-qy8qz3 жыл бұрын
Man, I love KZbin. Been putting up with this problem for a couple of years (with exactly the same bike). Just done everything you said mate and it worked first time! Cheers pal.
@JonnyLeeguitarist3 жыл бұрын
Steve Jones that’s great news mate , I’m happy it worked for you . Thanks for watching.
@diddlysquids44723 жыл бұрын
That worked a treat, just in time for MOT too. Thanks!
@JonnyLeeguitarist3 жыл бұрын
Excellent! , thanks for watching
@Franziebd2 жыл бұрын
Hello Johnny Lee, I though the neutral light was dead... Thanks too you, it's fixed !! Thank you very much
@JonnyLeeguitarist2 жыл бұрын
That’s great news ! Thanks for watching
@henrikling60062 жыл бұрын
Thanks! Worked on the 650 as well. Cheers from Sweden!
@JonnyLeeguitarist2 жыл бұрын
Excellent news ! Thanks for watching
@ritchie195028 күн бұрын
haha I'm a Swede too and i also have this problem on my Gsf 650 :) i will try it out as soon as i can.
@JonnyLeeguitarist28 күн бұрын
@ritchie1950 let me know how it goes
@rollotomassi82512 ай бұрын
Thank you ! Will try this on my 1250 today Sweden salutes you!
@JonnyLeeguitarist2 ай бұрын
You’re welcome have a great day 🙏
@rollotomassi82512 ай бұрын
@@JonnyLeeguitarist well it did not work , i cleaned it with brake cleaner so not The one you used. Will try one more time 🤟
@JonnyLeeguitarist2 ай бұрын
@rollotomassi8251 hopefully it will work next time mate
@nathan300689Ай бұрын
@@rollotomassi8251have a go at spraying the side stand switch with a lubricant too. I've just done both and it now works
@rollotomassi8251Ай бұрын
@@nathan300689 thanks for The tip!
@andywilson80332 жыл бұрын
Great information
@JonnyLeeguitarist2 жыл бұрын
Thanks buddy
@Tarmunds4 ай бұрын
thanks a lote mate, u saved my day !
@JonnyLeeguitarist4 ай бұрын
Good stuff 😎
@barryparker34743 жыл бұрын
I have been doing the change down from second and roll a few feet trick for ages to get it to work i might try this.
@JonnyLeeguitarist3 жыл бұрын
Barry Parker let me know how you get on and thanks for watching.
@wayne40905 ай бұрын
Thanks top info
@JonnyLeeguitarist5 ай бұрын
No problem 👍
@TheKarlos500 Жыл бұрын
Hi. Cleaning help for little time. Best thing is hit that middle copper tap carefully wider when you push that plastic down and then there is no more loose gap. Connectors can touch better again. No need to buy new switch. Be carefully when you hit that copper tap!
@JonnyLeeguitarist Жыл бұрын
Great tip!
@steves60933 жыл бұрын
Great vid, was having same problem with the neutral light, tried to clean it as well still not working, replaced the switch still nothing, checked wire harness connection behind instrument cluster and saw that it was coming loose probably do to vibration, reattached it and all is well. Just an FYI if cleaning does nothing check the connection next before buying new switch and save some $. I wish I would have!
@JonnyLeeguitarist3 жыл бұрын
Yeah when they get too far gone , you’ve gotta replace it .. thanks for watching.
@rafalh9698 Жыл бұрын
Cheers Steve 🥃 your feedback save some £££ I had exactly the same issue .
@johnberry53392 жыл бұрын
HI Jonny Lee :) Thank you very much for this tutorial!.. It has put my mind at ease knowing that this is a common fault. I have only had the bike 3 weeks and this neutral light problem popped up. At least I know it's not a big job. Thanks, John from Sunny Donny :)
@JonnyLeeguitarist2 жыл бұрын
Hi mate , no problem at all , let me know how it works for you. Thanks for watching I appreciate it.
@gorillaau2 жыл бұрын
I just bought one of these bikes. This video was part of my pre-purchase research. The Bandit is a nice bike, in general. The position of that switch, being so close to the chain, is a design flaw.
@rossdoble4162 Жыл бұрын
Cheers 👌
@JonnyLeeguitarist Жыл бұрын
No problem
@TheGreenle4 жыл бұрын
Did mine last year on my 1250 and it's been fine since. My mates wants his doing now. Yes it's a common fault.
@TheGreenle4 жыл бұрын
Just did my mates, 15/20 min job.
@gorillaau2 жыл бұрын
Suzuki should have put the switch on the other side on the engine, get it away from the chain oil and associated fluids.
@MsAhmed20164 жыл бұрын
need more videos about bandit 1250 my friend
@JonnyLeeguitarist4 жыл бұрын
Yeah I should do a ride vlog soon, bit more twisties fun maybe . Thanks for watching, i appreciate it.
@MsAhmed20164 жыл бұрын
@@JonnyLeeguitarist your bandit 1250 video is the best in KZbin need more informative videos and services and basic maintenance and best ways to ride bandit and best ways to get more kmpg and fun . Thanks for your respond, I appreciate it.
@gorillaau2 жыл бұрын
I'm looking at buying a 1250S and currently doing a marathon of videos on the bike.
@JonnyLeeguitarist2 жыл бұрын
Get one and i promise you’ll love it .
@ven997 Жыл бұрын
Hi,make a video of how the arcs are attached. Привет, покажи как и где крепятся дуги.
@JonnyLeeguitarist Жыл бұрын
😎
@brunohozmec33439 ай бұрын
Greeting! It also has a problem with the neutral indicator. I disassembled the indicator and cleaned it. It worked for a moment, however, I see oil leaking in that part. I assume that this is not normal and by the time the oil gets between the electrical contacts, it stops working. Can you help? Thank you in advance and best regards from Croatia. 
@JonnyLeeguitarist9 ай бұрын
You will have to replace the switch , the seal sounds like it’s failed .
@brunohozmec33439 ай бұрын
Just so there is no misunderstanding. When the indicator is mounted, there is no oil leakage, however, I can see that the contacts from the indicator are bathed in oil. It's normal? 
@JonnyLeeguitarist9 ай бұрын
No , there shouldn’t be oil there . Something is definitely leaking .
@christiaankruger52992 жыл бұрын
As soon as i put my kickstand out my neutral light comes on and stays on if i put my stand away until i switch off the electrics… any idea on cause?
@JonnyLeeguitarist2 жыл бұрын
Probably check the kickstand switch . It’s a small piece of plastic that pushes in when the stand is up . Spray it with WD40 to see if it releases , they can get full of dirt aswell .
@MrMichaelConstantine3 жыл бұрын
Is the switch located the same place on the mk2 1200 bandit?
@JonnyLeeguitarist3 жыл бұрын
Same side yes .
@kinderutz9 ай бұрын
@@JonnyLeeguitaristit's way easier on the 1200....no cover to remove, it's in plain sight near the slave cylinder.....one 4mm Allen head bolt and it's just a hall sensor ...clean it up and reinstall it....20sec job, just did my 05 yesterday.
@JonnyLeeguitarist9 ай бұрын
@kinderutz nice one .
@OptimusCrime_694 жыл бұрын
Did not work at the first try. I had to scratch of dirt from the contacts, and now it works sometimes.
@JonnyLeeguitarist4 жыл бұрын
Yeah the build up can be bad in extreme cases, if it doesn’t work after this , then a new switch is in order .
@sonofagalwayman65534 жыл бұрын
what about using dielectric grease as a barrier, this is the correct way to apply the stuff kzbin.info/www/bejne/d5aUXp57apmJkM0
@banditnev Жыл бұрын
Didn't work for me but a new part did. The switch was just too old or worn out!
@JonnyLeeguitarist Жыл бұрын
That’s a shame mate .
@banditnev Жыл бұрын
@@JonnyLeeguitarist I did try though.
@SuperTomi88 Жыл бұрын
Cleaning this fucking sensor help many times just for a moment and later that same sytuation.... Dont work Look at this man: m.kzbin.info/www/bejne/hXWaZ2yhpc1kj6c&pp=ygUTQmFuZGl0IGN6dWpuaWsgbHV6dQ%3D%3D