Suzuki LTR/RMZ 450 hybrid

Built myself a new practice quad.Built RMZ engine with Yoshi STR cams.Carrillo rod and piston.Cut re angeled,centered intake with port match for maximum flow and fit in LTR frame.Vortex ecu,KTM throttlebody.LTR fuelsystem with higher fuel pressure.JD Performance longtravel mgc a arms.Elka legacy plus shocks front and rear.New alu subframe.LTR airbox and intake tube.

[@thecarboncartel1]

I just bought a new 2022 rmz450 today. For this exact intent. Thanks for the video.

[@nathanbastien5584]

Would I be able to buy a set of engine mounts? The ones where I wouldn’t have to modify the head.

[@23MikeJ22]

Is that the stock exhaust setup? Sounds really good💪🤘

[@steinarildwiikhansen890]

Header is from an 09 RMZ 450 rear is stock LTR with a small custom mid section.It does sound pretty good yes :)

[@SaeCampbell]

Do you happen to know if a ltr cylinder will fit a rmz 450?

[@mrKushmann1]

Can you make another set and if so how much ?

[@jchcameron]

What is the reason for an rmz motor and not just rebuilding the original motor?

[@steinarildwiikhansen890]

The quad is 35+Lbs lighter with the RMZ engine set up.Stronger transmission,The RMZ engine also makes more power stock ++

[@wiattmarlatt3252]

How do you fasten the beak so it’s not flopping around?

[@steinarildwiikhansen890]

They come with 3 small bolts n nuts

[@brandonbankes8890]

How is the power difference compared the ltr motor ?

[@steinarildwiikhansen890]

Powerwise a stock RMZ is comparable to a built LTR engine(headwork,cams,porting etc..) But the lighter weight also gives it better power to weight ratio + the RMZ transmission is a lot stronger..

[@mrKushmann1]

Hey bro where do I find the motor mounts.

[@steinarildwiikhansen890]

Late reply but I make my own mounts.

[@dcvlogz]

where can i get those nerf bars? Thank you

[@steinarildwiikhansen890]

They are called XRW Q1 and I got mine from ATVs Only in UK.

[@dcvlogz]

@@steinarildwiikhansen890 Thanks

[@rodneyvanfossen3294]

What modifications you have to do for it all to work

[@steinarildwiikhansen890]

This one is a bit special with the custom head.The standard RMZs i use a pivot mount and move the engine forward and to the side to line up the sprockets.Custom motor mounts and tronics bracket. LTR fuelpump,fpr with slight mods to fuel lines.Custom exhaust mid section.LTR airbox and intake tube.Slight mods to rad hoses.

[@redrockracing4571]

Where did you get motor mounts? I’m starting this same build.

[@steinarildwiikhansen890]

@@redrockracing4571 Made my own,see my other comment/answer.

[@gavscorsaturbo2871]

@@steinarildwiikhansen890 Have you got any pictures of the rear engine mount you made to move the engine forward and to the side.

[@MrTheguywiththemoney]

Can this be done with a 2018+ rmz?

[@steinarildwiikhansen890]

Yes,but with engine mounts that moves the engine slightly forward and to the side to line up the sprockets and for intake to clear the rear shock mount,I have built a few like that in the past.This one has a head with the intake port modified to clear rear shock mount etc..