DUCATI BURNED REGULATOR REPAIR 748, 916, 996

Рет қаралды 617

3 ай бұрын

this video is to guide you step by step how to repair your regulator and stator wiring on any ducati.
this could be a 748, 916, 996 and more

Пікірлер: 19

@JDye-youtube 2 ай бұрын

That was a real nice video with lots of connector work. These things are notorious for oil seeping out of the stator housing down the stator wire and into the connector. Good practice to run the wire up where it exits the housing and then back down so the oil seepage doesn’t run down into the connector. IMO resistance created by a low, weak battery is what creates the heat that burns the connectors up, so a good battery tender and a new battery every three years is great prevention.

@PXCBIKES 2 ай бұрын

Thank you for watching.. 🖐.. I have not come across oil travelling down the wire before, but I move wiring away from the engine to keep it away from as much heat as possible. But a weak battery isn't good at all.. the single phase stator is not as good as the 3 phase but the copper core is too small, resulting in excess heat from the power flowing through the conductor, which makes higher resistance. It is the job of the regulator rectifier to absorb this but results in overheating and then melting the connectors.. Also, if the copper contacts in the connectors become oxidised, then this will create high resistance resulting in excess heat.. it is always good practice not to have the engine running for long periods of time without airflow to cool as the wiring will become hot.

@JDye-youtube 2 ай бұрын

@@PXCBIKES Couple of great tips to avoid the problem to begin with!

@trevor1200 2 ай бұрын

@@PXCBIKESI have the same problem, where I can buy the new connectors?

@PXCBIKES 2 ай бұрын

EbY they are just 3 way electrical connectors ..or you can fit any connector that has 3 terminals

@trevor1200 2 ай бұрын

@@PXCBIKES can you post a link?

@Warren007 3 ай бұрын

Good work Paulo😎

@PXCBIKES 3 ай бұрын

Haha thank you man 🤜🤛

@575ban 3 ай бұрын

I had a 1996 748 Bip with the side stand mod so the stand wouldn't spring back up on its own, but it didn't have the safety switch mod. I set off from a bike meet once like a knob head (long time ago mind), every one waving a pointing and I'm think, how cool must I look. Tipped it into the corner and bang! the hole bike came off the ground, or at least it felt like it did. Lucky manage to stop on. Obviously I wasn't looking cool at all 🤣😂😂🤣

@PXCBIKES 3 ай бұрын

😆😆😆😆 bloody hell, yeah ...I had a 98 748 with the sidestand Spring Mod, and after fitting it, I eventually sett off infrastructure of some girls looking cool and I could bearly stay on the bike and had to merge to the opposite side of the road to stop ! The side stand was alot shorter after that 😆

@575ban 3 ай бұрын

@@PXCBIKES good old days eh 😂..... 🤔

@PXCBIKES 3 ай бұрын

Exactly yes 👏